|
| 1 | Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each,,complete all as specified and as directed. |
| 2 | Taking down shutter only and re-fixing in same opening after planing, chesling the shutters of any description exc 1 sq. m but n exc 2 sq. m each,complete all as specified and as directed. |
| 3 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed. |
| 4 | Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.(Note:Demolished material to be used for filling under floors to bring upto required level, if neccesary) |
| 5 | Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water remove Dust, debries/ rubbish etc., complete all as specified and as directed. |
| 6 | Demolition Brick Work or Stone/ Bolder masonary built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any description, complete all as specified and as directed.Note:Demolished material to be used for filling under floors to bring upto required level. |
| 7 | Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. |
| 8 | Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. |
| 9 | Demolition of unserviceable nahani traps / broken gully trap floor trap of any description and removing material from site, complete all as specified and as directed. |
| 10 | Dismantling of 100 mm bore cast iron (sand cast) soil, wasteor reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified and as directed. |
| 11 | Demolition/Breaking up Drain Pipes (SGSW) 150mm bore (dia), Jointed in Cement Mortar of any description including PCC of Packing and Haunching to Sides of the Pipes (except Bed), complete all as specified and as directed. |
| 12 | Demolition of Cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for,complete all as specified and as directed. |
| 13 | Surface dressing n exc15 cm deep in soft and loose soil, complete all as specified and directed. |
| 14 | Excavating in post holes (or simlar holes) each n exc. 0.50 cm getting out returing filling in and ramming earth as broken rubble mixed with earth aroundin layers n exc. 25 cm watering & removing surplus soil to a distance n exc. 50 m and making good surface. |
| 15 | Excavation in trenches not exc. 1.5 Metre Wide and not exc. 1.50 Metre in Depth for foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes for laying of UG Cable/Pole/Stays etc, and getting out as in Soft/Loose Soil, complete all as specified and as directed. |
| 16 | Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed. |
| 17 | Removing excavated Materials (Soils) n.exc.50.00 Metreand depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed. |
| 18 | Removing excavated Materials (Soils) exc. 50.00 Metre but n. exc. 250 meterand depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed. |
| 19 | M&L for Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed. |
| 20 | M&L for brick work with sub-class ‘B’ Bricks Straight or Curved on Plan to any radius in half brick thick built in Cement Mortar 1:4, complete all as specified and as directed. |
| 21 | M & L for 25 mm thick PCC 1:2:4 type B-1 (20 mm graded aggregate ) as in roof padding complete all as specified and as directed |
| 22 | M & L for 40 mm thick PCC 1:2:4 type B-1 (20 mm graded aggregate ) as in roof padding complete all as specified and as directed |
| 23 | M&L for Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.11 Sqm but n.exc. 0.18 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tilescomplete all as specified and as directed. |
| 24 | M&L for glazed ceramic coloured tiles, glossy finished of size350x450x7mm thick as in vertical surfaces such as skirting/dados and riser of stems., over and including including 10 mm thick rendering/backing coat in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles,complete all as specified and as directed. |
| 25 | M&L for Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 26 | M&L for Rendering 10mm thick in Cement Mortar 1:4 on fair faces of ceiling , plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 27 | M&L for 20mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement complete all as specified and as directed. |
| 28 | Supply only liquidwater proofing compound, complete all as specified and as directed. |
| 29 | M&L for preparing newly plastered surfaces of wall and applying Three Coats of White Wash, complete all as specified and as directed |
| 30 | M&L for preparing newly plastered surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed |
| 31 | M&L for preparing new Plastered Surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of primer, complete all as specified and as directed. |
| 32 | Supply and fixing Powder coated anodised aluminium door and window/Vent frame, complete all as specified and as directed. |
| 33 | S&F, colured anodisedaluminium sliding windowwith shutter styles 40mm x20 mm sheet thickness 1.5mm Two shutter of glass and one shutter of wire mesh consisiting ofStainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, frame (chowkat) of window shall 100mmx44mmx1.5mm thick section with or without rebate 5.5mm thick tinted glass fixed with aluminium beads locking arrangement with each shutter incl aluminium grill, complete all as specified and as directed..Note: Size of window shall be as per site requirement. |
| 34 | S&F, colured anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screwscomplete all as specified |
| 35 | S&F Factory made Solid PVC Door Frame of size 50x47 mm made out of 5.0 mm thick wood grain printed PVC sheet reinforced with Mild Steel Square Tube and edges will be painted to match with printed sheet and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed. |
| 36 | S&F Factory made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Square Tube for Top and Bottom Rails, mild steel Frame shall be covered with heat moulded plain colour PVC \"C\" Channel having PVC Sheet Strip 20 mm wide stuck inside with Solvent Cement for Styles and plain colour PVC Sheet for Top Rail, Lock Rail & Bottom Rail on either side and asgap insert for Top Rail, Bottom Rail Panelling of plain colour PVC Sheet to be fitted in mild steel Frame welded/sealed to the Styles and Rails with suitable Sheet Beading and jointed together with Solvent Cement and fixing in the Frame at Site as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed. |
| 37 | S&F stainless Steel Butt Hinge of size 100mm, medium weight, cold rolled and fixed, complete all as specified and as directed |
| 38 | S&F Aluminium Handle 150mm long Cast type, complete all as specified and as directed. |
| 39 | S&F Aluminium anodised Barrel Tower Bolt 150 mm long, Extruded Section and fixed, complete all as specified and as directed. |
| 40 | M&L for Sheet Glass, frosted, 4.0mm thick, Glazing in Wooden/Metal Frames and glazed with Beads or Oil Putty, area not exc. 0.50 SQM in Each Pane, complete all as specified and as directed. |
| 41 | S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and fixed, complete all as specified and as directed. |
| 42 | Supply & laying Steel Water Tubing 15mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed. |
| 43 | All as per Item no.42 here in before but for 20 mm, complete all as specified and directed. |
| 44 | All as per Item no.42 here in before but for 25 mm, complete all as specified and directed. |
| 45 | Cutting chases for water tubing, pinning in making good to facing where required in CM(1;3) to brick wall cutting grith n.exc. 10cm girth complete all as directed. |
| 46 | S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed (as approved) complete all as specified and as directed. |
| 47 | S&F in repairBib Tap 15mm bore (dia) Fancy Type, Cast Copper Alloy, Chromium Plated with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed. |
| 48 | S&F Bib Tap 15mm bore (dia) Fancy Type, Cast Copper Alloy, Chromium Plated with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed. |
| 49 | S&F in repair Pillar Tap 15mm bore (dia), Cast Copper Alloy, fancy type Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed. |
| 50 | S&F Pillar Tap 15mm bore (dia), Cast Copper Alloy, fancy type Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed. |
| 51 | S&F in reapir Stop Cock 15mm bore, Cast Copper Alloy, fancy type Chromium Plated screwed down high pressure with Crutch or Butter-fly Handle, screwedboth Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed. |
| 52 | S&F Stop Cock 15mm bore, Cast Copper Alloy, fancy type Chromium Plated screwed down high pressure with Crutch or Butter-fly Handle, screwedboth Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed. |
| 53 | S&F in reapir Stop Cock 15mm bore , Fancy type, Chromium Plated with long shank, Concealed type, screwed down high pressure with Crutch or Butter-fly Handle, screwedboth Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed. |
| 54 | S&F chromium plated brass two-in-one bib cock with wall glange, fixed with 15mm bore iron pipe as in repair etc. complete all as specified and as directed. |
| 55 | S&F chromium plated brass three-in-one wall mixturewith provision for both over head shower with 115mm long bend pipe as in repair etc. complete all as specified and as directed. |
| 56 | S&Fin repair chromium plated brass over head shower with arm, ,fixed to 15mm bore of iron pipe complete all as specifeid and dircted |
| 57 | S&F chromium plated 15mm borehealth fucate with 1.2m to 1.5m longeasy flex tubewith hook (Foma: full Ivory), as in repair etc. complete all as specified and as directed. |
| 58 | S&F in repair chromium plated brass fancy type soap dish etc, complete all as specified and as directed. |
| 59 | S&F in reapir Brass Chromium plated Tubular Towel Rail, 20mm dia, D-type, 60 Cm long between Flanges with Bracket (one Pair) and fixed, complete all as specified and as directed. |
| 60 | S&F 6.0mm thick looking mirror mounted on 6mm thick acrylic sheet board backing, fixed as in repair with chromium plated screws and cup washer complete all as specified and as directed. |
| 61 | S&F in repairs vitreous china squatting pattern Orissa pattern Water closet, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as directed. |
| 62 | S&F in repair vitreous china wash hand basin, white size 550 x 400 mm incl bracket & waste coupling complete all as specified and as directed. |
| 63 | S&Fin repair vitreous china wash down water closet pan (pedestal pattern), complete all as specified and as directed. |
| 64 | S&F plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device fixed in repair, complete all as specified and as directed. |
| 65 | S&F in repair10 litre capacity PVC valveless, syphonic actiontype, flushing cistern, low level, white, with inlet, ball valve, float and handle/push flush type brackets etc complete all as specified and as directed. |
| 66 | S&F in repair PVC Connection Pipe 15mm in size with PTMT Nuts of length 600mm and fixed, complete all as specified and as directed. |
| 67 | S&F PVC Connection Pipe 15mm in size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed. |
| 68 | S&F 32mm bore dia Waste coupling of PTMT (half or full threaded) minium weight 32mm-45 gms/40mm-60 gms),complete all as specified and as directed. |
| 69 | Supply and fixing of waste fitting of 32mm bore of discharge pipe, brass,chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed. |
| 70 | Supply and fixing of 32mm bore of discharge pipe, Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches, complete all as specified and as directed. |
| 71 | S & F 110mm PVC (SWR) WC connecter with lip ring, complete all as specified and as directed. |
| 72 | S & F 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and as directed. |
| 73 | S&F PTMT grating Doom 125mm dia (minimum weight 40 Grams)complete all as specified and as directed. |
| 74 | S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in Trenches or in Floors complete all as specified and as directed. |
| 75 | S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, fixed to wall, complete all as specified and as directed. |
| 76 | S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in Trenches or in Floors complete all as specified and as directed. |
| 77 | S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, fixed to wall, complete all as specified and as directed. |
| 78 | S&F PVC (SWR) 110 mm bore (dia) Bend any radius, and jointing with Solvent Cement , complete all as specified and as directed. |
| 79 | S&F PVC (SWR) 75 mm bore (dia) Bend any radius, and jointing with Solvent Cement , complete all as specified and as directed. |
| 80 | S&F PVC (SWR) 110 mm bore (dia) Bend any type with oval access door any radius, and jointing with Solvent Cement , complete all as specified and as directed. |
| 81 | S&F in repairPVC (SWR) 75 mm bore (dia) junction single, (SingleT) any type with oval access door any radius, and jointing with Solvent Cement , complete all as specified and as directed. |
| 82 | S&F PVC (SWR) 110mm bore (dia) Vent Cowl, jointing with Solvent Cement and fixed, complete all as specified and as directed. |
| 83 | M&L for Cement Concrete Bed 1:3:6 (40mm graded aggregate) of 150mm bore (dia) Drain Pipes including Packing under and Haunching to Sides ofthe pipes after Laying and Testing of Pipe, complete all as specified and as directed. |
| 84 | S & FHDPE sewer pipe of 150mm dia complete all as specified and directed. |
| 85 | M&L for Reinforced Cement Concrete (Nominal Mix)type B1 1:2:4 (20mm graded stone aggregate) as in slab supported on wall,beam and column in floor,roof,landing,balconies,canopies,deck slab and in shelvesand the like, complete all as specified and as directed.NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items. |
| 86 | M&L for Formwork to Soffits of suspended Slabs such as Roof Slabs, Floor Slabs, Landings and similar work; not exc. 200mm thick (horizontal or sloping), rough finished surfaces of Concrete, complete all as specified and as directed. |
| 87 | M& L for Providing precast RCC type B1 1:2:4 (20 mm graded aggreagae) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4, complete all as specified and as directed. |
| 88 | M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed. |
| 89 | M & L for 20mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed. |
| 90 | M&L for Cement Concrete 1:4:8, Type D2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. complete all as specified and as directed. |
| 91 | M&L for Cement Concrete 1:3:6, Type C2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. complete all as specified and as directed. |
| 92 | M&L for Hardcore of broken stone or boulders of gauge exc. 63mm but not exc.100mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed. |
| 93 | M&L for 100mm thick Cement Concrete 1:4:8, type D2 (40mm graded aggregate), as in Sub-base finishing Concrete Surfaces Even and rough, complete all as specified and as directed. |
| 94 | M&L for 75mm thick Cement Concrete 1:2:4, type B2 (40mm graded aggregate), as in Sub-base finishing Concrete Surfaces Even and rough, complete all as specified and as directed. |
| 95 | M&L for Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde-E-250) quality-B, complete all as specified and as directed. |
| 96 | M & L for plate (plain or chequered) Channel, square cut or notched forming holes without any attachment, complete all as specified and as directed. |
| 97 | M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including scurring bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed. |
| 98 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified, complete all as specified and as directed. |
| 99 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based plain Steel Sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified, complete all as specified and as directed. |
| 100 | M&L for preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed. |
| 101 | M&L for preparing new or previously untreated Steel and Iron Surfaces of any description, not exc. 10 Cm Width or Girth and applying one Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. |
| 102 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers, wastes and waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm, complete all as specified and directed. |
| 103 | S&F stainless steel kitchen rack of size 31\"x24\"x10\" fixed in wall with screws and washer complete all as specified and as directed. |
| 104 | M&L for Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including Rigid PVC Conduit, medium grade, ISI marked of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLS) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed. |
| 105 | All as per item No. 104 here in before for One Ceiling Fan/Exhaust Fan Point controlled by One 1-Way Switch 5 Amp and Regulator, complete all as specified and as directed. |
| 106 | All as per Item no. 104 here in before but or One 3 Pin 5 Amps Switch Socket Outlet Point controlled by One Switch on Same Board, complete all as specified and as directed. |
| 107 | All as per Item no. 104 here in before but or One 3 Pin 5 Amps Switch Socket Outlet Point controlled by One Switch on Independent Board, complete all as specified and as directed. |
| 108 | Description all as per item No 104 here in before butusing 2.5 sq mm single core copper conductor cable of multistrandedFRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of2.5 sq mm copper conductorFRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 109 | S&F Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 110 | S&F Switch Piano, Flush type, Single Pole, 1-Way, 15 Amps, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 111 | S&F Socket Outlet, 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5 Amp, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 112 | S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 3 Pin, 6 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 113 | S&F Switch Socket Combination, 2-in-1, Flush type, multi-purpose, 3 Pin, 16 Amp, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 114 | S&F Ceiling Rose, Surface Bakelite of size 65x50mm, 3 Terminals, AC, 50 Hz, 240 Volts, conforming to IS and connecting up, complete all as specified and as directed. |
| 115 | S&F pre-wired double door MCB DB made out of 18 SWG CRCA steel sheets, phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal blocks for incoming and outgoing circuits, inbuilt loose wire box, ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar, 2+6 way double door openable completeall as specified and as directed. |
| 116 | S&F MCB Double Pole, 20 Amps, 240/415 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T, Cat No: BB20320B, BB20320C or equivalent in Schinder/Legrand.) |
| 117 | S&F MCB SP,6 Amps, 240 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T, Cat No: BB10160C or equivalent in Schinder/Legrand.) |
| 118 | S & F wall mounted LED 18 watts , batten type T8 light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driverconnector block etc complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting including ultra bright LED polycarbonate(T8) tube (single side connection) 4\" x 18 watts with G13 lamp holdercomplete all as specified and as directed. Make-Havells, Model -REGALBATTENT5UPTO1X18WDSBSWH For Batten Fitting and Model-PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelightor equivalent in CG/Polycab. |
| 119 | S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC cover having top opening seperate driver compartment with IP 66 protection and impact resistance of IK07 with electronic driver of capacity 25 watts with pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as specified and as directed.Make-Havells,Model No - ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent in CG/POLYCAB |
| 120 | S&F Sub-Class ‘B’ Brick, well burnt, laid breadthwise along the length of Cable laid in trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed. |
| 121 | M&L for Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after lay-ing the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE: For the purpose of Payment, Punned thickness of Sand Cushioning only shall be measured and paid for. |
| 122 | Supply & laying LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 10 Sqmm 2.0 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connec-tion to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and as directed.NOTE : Earthwork, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items. |
| 123 | S&F Galvanised Iron Pipe 50mm bore (dia), Light grade as in protection of UG Cable laid in Trenches/fixing with Poles with Mild Steel Flat Iron Clamps, complete all as specified and as directed.NOTE: Cost of Mild Steel Clamp, Nuts, Bolts and painting is deemed to be included in the QUOTED UNIT RATE. |
| 124 | S&F heavy duty exhaust fan 300 mm sweep MS body, 3 wing 1400 rpm, single phase 240 volts copper wounds complete with all accessories as louvers shutters etc incl making connection through 3 core PVC coper wire run through flexible pipe. Single phase type. |
| 125 | Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 40 mm bore (dia) for passing of UG Cable, complete all as specified and as directed. |
| 126 | M&L for Earthing complete with Galvanised Steel Earth Plate Electrode 600x600x6mm, burieddirectlyin ground vertically to a depth not less than 2.25 Metre below ground level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal ground level, connectedto GalvanisedEarth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) ‘light grade’ upto 1.0 Metreabove theFloor Level of Building where Main Switch/ DB situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150 mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded aggre gate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded aggregate), reinforced with 8.0mm dia TMT Bars @ 100mm Centre to Centre in both ways,GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) ‘medium grade’ including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including removal old existing unserviceable Earthing, complete all as specified and as directed. |
| 127 | Supply and fix PVC connection for 15mm dia for geyser connection size 450mm long, complete all as specified and as directed. |
| 128 | Nuts and bolt along with suitable washer for fixing for item No. 1 & 2 complete all as specified and as directed. |
| 129 | Cutting wall in round shape and plastering with 1:3 with cement mortar and making smooth surface and matching paint with existing finishes after fixing of Ext fan complete all as specified and as directed. |
| 130 | Cutting chases in wall and plastering with 1:3 with cement mortar and making smooth surface and matching paint with existing finishes after fixing PVC conduits in wall complete all as specified and as directed. |
