|
| 1 | Electrical Works. |
| 2 | Providing wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit pipe concealed in the wall with GP Box ,piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed including matching colour wash. |
| 3 | Providing wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable drawn through existing concealed steel conduit with and 5A flush/piano type switch & ceiling rose/batten holder fixed with 3mm thick phenolic laminted backlite sheet with brass machine screw and washer mounted over existing M.S. switch board box/junction box |
| 4 | Providing wiring point for plug point with and 5A flush/piano type switch & 3 pin socket with 1.5 sq. mm FRLS PVC insulated multi strand copper conductor & earth wire cable mounted over existing M.S. switch board box/junction box |
| 5 | Providing wiring point for exhaust fan with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable drawn through existing concealed steel conduit with and 5A flush/piano type switch & ceiling rose/batten holder fixed with 3mm thick phenolic laminted backlite sheet with brass machine screw and washer mounted over existing M.S. switch board box/junction box |
| 6 | Providing wiring point for fan / fesh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire(green colour) drawn inside the conduit wall/concealed with GP Box , piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc complete in all respect, including matching colour wash. |
| 7 | Providing wiring point for call bell with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq.mm.FRLSH PVC insulated copper conductor cable as earthwire(green colour) drawn inside the conduit. pipe concealed/over in the wall, complete with piano type bell push or 2 pin socket etc., complete in all respect including matching colour wash. |
| 8 | Supply and drawing invertor wire of 1.5 sq. mm FRLS PVC insulated single core copper conductor of yellow colour in existing surface/recessed steel/PVC pipe conduit as required |
| 9 | Supply and laying/drawing of submain with 2x2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor drawn in in existing PVC conduit (concealed/wall) complete in all respect. |
| 10 | Supply and laying/drawing of submain with 2x4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor drawn in in existing PVC conduit (concealed/wall) complete in all respect. |
| 11 | Supply and laying/drawing of submain with 2x6 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor drawn in in existing PVC conduit (concealed/wall) complete in all respect. |
| 12 | Supply and laying/drawing of submain with 2x10 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor drawn in in existing PVC conduit (concealed/wall) complete in all respect. |
| 13 | Supply and Fixingof 4 number 4 sq.mm. PVC insulated 1100V grade multistrand single core capper conductor cable in 32mm dia heavy duty (2mm thick) PVC conduit with 2 nos sq mm FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit. |
| 14 | Supply and laying of70 sq mm. 3.5 core standed aluminium conductor insulated armoured served sheathed cable 1100V garde at a depth of 750 mm below ground level over a cushion of 75 mm thick fine river sand alround and protected with well burnt bricks on sides and on top.On surfacethe cable run shall be fixed on M.S. clamps etc of suitable size or as directed by Engineer in charge complete in all respect. put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. |
| 15 | Suply & fixing of 70 sq. mm 3.5 corebrass nickle plated compression gland for PVC insulated cable complete in all respect. |
| 16 | Supply & Laying of90 mm HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc in existing treanch including cost of material,labour and T&P. |
| 17 | Supply and fixing of crimping, solderless, copper tin electroplated lugs of Dowells/Ismail make suitable for 1.5 sq.mm to 10 sq.mm cables, including tapping with insulating tape, complete in all respect. |
| 18 | Providing power plug with 15 Amp./250 volt flush type switch and 5 pin 15 A/250 volt flush type universal socket switch on suitable concealed M.S box of size 175x100x50mm sizewith phenolic laminted backlite sheet cover 3mm thick complete in all respect including supply of all material, labour T&P. |
| 19 | Providing power plug with 20 Amp./250 volt flush type switch and 5 pin 20A/250 volt flush type universal socket switch on suitable concealed M.S box of size 175x100x50mm sizewith phenolic laminted backlite sheet cover 3mm thick complete in all respect including supply of all material, labour T&P. |
| 20 | Supply & fixing ofelectronic fan regulator (stepped type) 120-280V ISI marked on the existing surface/phenolic sheet switch board including making connection |
| 21 | Supply & fixing ofcall bell of approved make on polished MDFEG/teak ply board including making connection. |
| 22 | Supply & fixing of 0.5Amp to 5Amp SP MCB, 10KA |
| 23 | Supply & fixing of 6Amp to 32Amp SP MCB, 10KA |
| 24 | Supply & fixing of 0.5Amp to 5Amp DP MCB, 10KA |
| 25 | Supply & fixing of 6Amp to 32Amp DP MCB, 10KA |
| 26 | Supply & fixing of 80Amp to 100Amp 4 pole MCCB, 16KA ThermalMagnetic release CAT-B |
| 27 | Supply and fixing of surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB with tinned copper bus bar,neutral bus bar,interconnection complete in all respect.(CAT B) |
| 28 | Supply and fixing of surface/flush mounting 12 ways TPN distribution board with additional metal door without MCB with tinned copper bus bar,neutral bus bar,interconnection complete in all respect.(CAT B) |
| 29 | Supply and fixingof 100 AMP four pole Mouled case type on load change over switch with enclosure including the cost of labour, T & P and material reuired for proper completion of the work as per direction and satisfaction of Engineer an charge. |
| 30 | Supply and fixing of factory wired integral 70Watt-90Watt LED Flood light luminaries with die cast aluminium housing built with driver set confirming to IP 65 protection complete in all respect. CAT-AA |
| 31 | Supply & fixing LED tube light batten fitting with 1x22 watt LED tube light on wall/surface.CAT-AA |
| 32 | Supply & fixing LED tube light batten fitting with 2x22 watt LED tube light on wall/surface.CAT-AAA |
| 33 | Supply & fixing of pendent mounting LED light having 1x4\" size 36 to 46W seamlessly intergrateds luminier with acrylic sheet diffuser and intergral electronic driver complete in all respect.CAT-A |
| 34 | Supply & fixing recess/surface mounting round 24 to 32 watt LED down lighter having powder coated die cast aluminium housing with extended heat sink,diffuser/reflector and driver set complete in all respect.CAT-AA |
| 35 | Supply & fixing of square GI earth connecting strip complete with holes for earth leads and clamping screws as directed complete in all respect suitable for 3 nos. earth leads. |
| 36 | Supply & fixing single LED light wall bracket 3-6 watt on matching MDFEG board base etc. complete in all respect.CAT-AA |
| 37 | Supply & Erection of factory fabricated & wired metal clad dust and vermin proof floor mounting M.S Channel based TPN switch board complete with HRC type heavy duty TPN fuse switches with fuse and instrument chamber etc. complete in all respect.The instrument chamber shall be separate and shall comprise of flush type/digital ammeter voltmeter,selector switch for ammeter and voltmeter,instrument fuse,current transformer etc.The board shall have suitable capacity electrolytic aluminium bus bar as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/DMC support with deteachable side cover and shall be suitable for extension on the sides. The switches entery boxes shall be complete with suitable cable end boxes reverse. All outgoing of 40Amp above will be provide ampere meter with ring type CT & selector switch etc. The switch board shall be fabricated with CRCA sheet with minimum thickness of 2mm and cubical type switch shall be CAT AB & B-II and pedestal type for CAT-B and C only. (Incoming 200 AMP/415V TPN-01 Nos./Outgoing 63Amp TPN-03 or as directed by Engineer in charge. |
| 38 | Supply and laying & concealingof 20mm dia ,2mm thick PVC conduit pipe with ISI marked embossed and with PVC acessories confirming to IS No. 3419 like bends,couplers,staples and other acessories for drawing wires duly sealed at joints,plastering with cement sand mortar finished to level with mathing colour wash including cost of all material labour and T&P. |
| 39 | Supply and laying & concealingof 25mm dia ,2mm thick PVC conduit pipe with ISI marked embossed and with PVC acessories confirming to IS No. 3419 like bends,couplers,staples and other acessories for drawing wires duly sealed at joints,plastering with cement sand mortar finished to level with mathing colour wash including cost of all material labour and T&P. |
| 40 | Supply and laying & concealingof 32mm dia ,2mm thick PVC conduit pipe with ISI marked embossed and with PVC acessories confirming to IS No. 3419 like bends,couplers,staples and other acessories for drawing wires duly sealed at joints,plastering with cement sand mortar finished to level with mathing colour wash including cost of all material labour and T&P. |
| 41 | Supply and laying ofPVC corrugated conduits of 16 mm outer dia on surface with required fixing acessories including cost of all material labour and T&P. |
| 42 | Supply and laying ofPVC corrugated conduits of 20 mm outer dia on surface with required fixing acessories including cost of all material labour and T&P. |
| 43 | Supply and laying ofPVC corrugated conduits of 25 mm outer dia on surface with required fixing acessories including cost of all material labour and T&P. |
| 44 | Supply and laying ofPVC corrugated conduits of 32 mm outer dia on surface with required fixing acessories including cost of all material labour and T&P. |
| 45 | Supply & fixing 75mm x75mm x 60mm ideep metal box in recess with suitable size phenolic laminated sheet cover in front including cutting of wall and making good the same by cement etc. |
| 46 | Supply & fixing 150mmx75mmx60mm ideep metal box in recess with suitable size phenolic laminated sheet cover in front including cutting of wall and making good the same by cement etc. |
| 47 | Supply & fixing 200mmx250mmx60mm ideep metal box in recess with suitable size phenolic laminated sheet cover in front including cutting of wall and making good the same by cement etc. |
| 48 | Supply & fixing 250mmx300mmx65mm ideep metal box in recess with suitable size phenolic laminated sheet cover in front including cutting of wall and making good the same by cement etc. |
| 49 | Supply and laying of 8 SWG GI earth wire in steel conduit pipe duly bound with earth clops as per directed by the incharge including cost of material labour and T&P. |
| 50 | Supply and buryingof 40mm dia x 4.5 meters long G.I pipe vertically for ear thing having 12mm dia. Holes spaced 75mm apart drilled up to 2 meter form the bottem complete with earthing lead of No. 6 to 8 SWG GI Wire in G.I. pipe up to apron and from appron to switch board the cost if G.I. wire in G.I. pipe will be extra upto switch board, 30cm square C.I. box with hinged cover masonry enclosure funnel at top. alternate layers of charcoal/coke and salt at lest 150mm thick allround etc. as per directions of engineer in charge complete in all respects.As per UPPWD Sch. No. 701 |
| 51 | Dismentling of defective/damage/old wiring point of light,fan, plug,tube light,holder,ceiling rose,call bell & other lighting items etc including drawing damaged wiring from GI/Steel/PVC conduit,cost of labour work. |
| 52 | Dismentling & drawing of defective/damage/old main & submain from existing steel/PVC pipe including collecting scrap wires and all associated work. |
| 53 | Supply & laying UTP CAT-6 LAN Cable in existing surface/recessed steel/pvc pipe conduit as required. |
| 54 | Providing & fixing 25mm x5mm G.I. earth strip on surface or in recess including cost of GI saddle/Al. Alloy/cadmium/PVC fastener etc.plated iron screw etc. as required for connections. |
| 55 | Repair & rewinding of ceiling fan 1200mm sweep type including cost of material, men and T&P. |
| 56 | Repair & rewinding of exhaust fan including cost of material, men and T&P. |
| 57 | Supply & Eerection and testing of 1200 mm sweep type approved make electric ceiling fan,230-250V AC with minimum air delivery 210 cum/min anddouble ball bearing complete with standard down road,canopy, hanging shsckle,aluminium blades,without regulator with all acessories of approved as required ti IS: 374/2019 with upto date.(Havells/Crompton/Khatan) |
| 58 | Painting of ceiling fan in installed position with one or more coats of spray paintingwith synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent etc as required |
| 59 | Supply & fixing of Passive Infrared(PIR)technology based occupancy sensor having high preformance suitable for connected load upto 10Amp , for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements complete as required( For exhaust fan & light of washroom/Toilet) |
| 60 | Supply & fixing of approved make 400mm globe type polycorbonate post top lantern consisting of cast aluminium spigot complete with all acessories, lamp holder(without lamp) icluding fixing on gate pillars/existing GI pipe suitable for CFL/LED lamp |
| 61 | Supply & fixing M.S. down road 14 SWG(2mm) thick for ceiling fan including threading,painting, making holes etc. as required complete |
