|
| 1 | Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :all kinds of soil |
| 2 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.all kinds of soil |
| 3 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: all kinds of soil 1 metter from cutting edge |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 5 | Providing and laying hand packed stone soling 50 mm nominal size including filling, spreading, dressing,ramming, all leads lifts and all carriages complete. |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 7 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 8 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: |
| 11 | Reinforced cement concrete work in arches, arch ribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. |
| 13 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 14 | Suspended floors, roofs, landings, balconies and access platforms. |
| 15 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 16 | Arches, domes, vaults upto 6 m span |
| 17 | Extra for shuttering in circular work (20% of respective centering and Shuttering items)Foundations, footings, bases of columns etc. for mass concrete. |
| 18 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 19 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 20 | Arches, domes, vaults upto 6 m span |
| 21 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
| 22 | Steel reinforcement for R.C.C. work ready to use \"cut and bend\" rebars of approved make from factory/workshop to construction site including placing in position and binding allcomplete upto plinth level.TMT bars |
| 23 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.welded |
| 24 | 12mm Cement plaster finished with a floating coat of neat cement of mix:1 : 3 ( 1 cement : 3 fine sand) |
| 25 | 1 : 4 ( 1 cement : 4 fine sand) |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.two or more coats on new work |
| 27 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm |
| 28 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.15 mm and 20 mm dia. G.I. pipes |
| 29 | 25 mm and 32 mm dia. G.I. pipes |
| 30 | 40 mm and 50 mm dia. G.I. pipes |
| 31 | 65 mm and 80 mm dia. G.I. pipes |
| 32 | 100 mm dia. G.I. pipes |
| 33 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore |
| 34 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - SAND: 5kms |
| 35 | Beyond 5 km upto 10 km per km |
| 36 | Beyond 10 km upto 20 km per km |
| 37 | Beyond 20 km per additional km (30Kms) |
| 38 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Aggregate 20mm5kms |
| 39 | Beyond 5 km upto 10 km per km |
| 40 | Beyond 10 km upto 20 km per km |
| 41 | Beyond 20 km per additional km (30Kms) |
| 42 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Aggregate 40mm and above : 5kms |
| 43 | Beyond 5 km upto 10 km per km |
| 44 | Beyond 10 km upto 20 km per km |
| 45 | Beyond 20 km per additional km (30Kms) |
| 46 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Stone Soling :5kms |
| 47 | Beyond 5 km upto 10 km per km |
| 48 | Beyond 10 km upto 20 km per km |
| 49 | Beyond 20 km per additional km (30Kms) |
| 50 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Steel/ CGI Sheets:5kms |
| 51 | Beyond 5 km upto 10 km per km |
| 52 | Beyond 10 km upto 20 km per km |
| 53 | Beyond 20 km per additional km (30Kms) |
| 54 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Cement: 5kms |
| 55 | Beyond 5 km upto 10 km per km |
| 56 | Beyond 10 km upto 20 km per km |
| 57 | Beyond 20 km per additional km (30Kms) |
| 58 | Carriage of materials by manual means including loading, unloading, stacking of materials- (Sand) ist 50m |
| 59 | Beyond Ist 50m 1000Mtrs |
| 60 | Carriage of materials by manual means including loading, unloading, stacking of materials- Aggregate Below 40mm ist 50m |
| 61 | Beyond Ist 50m 1000Mtrs |
| 62 | Carriage of materials by manual means including loading, unloading, stacking of materials- Aggregate 40mm and Above ist 50m |
| 63 | Beyond Ist 50m 1000Mtrs |
| 64 | Carriage of materials by manual means including loading, unloading, stacking of materials- Stone Soling ist 50m |
| 65 | Beyond Ist 50m 1000Mtrs |
| 66 | Carriage of materials by manual means including loading, unloading, stacking of materials- Steel/CGI Sheets ist 50m |
| 67 | Beyond Ist 50m 1000Mtrs |
| 68 | Carriage of materials by manual means including loading, unloading, stacking of materials- Cement ist 50m |
| 69 | Beyond Ist 50m 1000Mtrs |
| 70 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means 15 to 40mmincluding stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : |
| 71 | Above 40 mm nominal bore |
| 72 | Providing and fixing of MS flanged joints (12mm thick) to double flanged GI/DI pipes including cutting of pipes, welding charges, cutting of flanges, rubber gasket, bolts, nuts including testing of joint and all sorts of carriages. Complete Job.100mm dia |
| 73 | 80mm Dia |
| 74 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 75 | Cutting bajri paths and making good the same including supply of extra quantities of brick aggregate, moorum and red bajri required. |
