|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | a) All Kinds of Soil |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cmin depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 4 | A)All kinds of soil |
| 5 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.a) All work upto plinth livel |
| 7 | iii) 1 : 4 : 8 ( 1 cement : 4 fine sand : 8 graded well burnt brickaggregate of 40 mm nominal size) |
| 8 | First class brick work in foundation and plinth including cost of all materials as required complete: |
| 9 | i) In cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 10 | 12 mm cement plaster of mix. |
| 11 | ii) In cement mortar 1:4 (1 cement : 4 fine sand) |
| 12 | Neat cement punning. |
| 13 | Providing and laying cement concrete 1 :2:4 (1 cement : 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement in/c cement slurry, rounding of edges and strips and cost of glass strips etc. complete. i40 mm thick with 20 mm nominal well burnt brick agreegate |
| 14 | i) 40 mm dia thick with 20 mm nominal well burnt brick agreegate |
| 15 | Excavating trenches of required widthfor pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm(slope-1 in 200)including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in - charge. |
| 16 | B) For GI/CI/DI pipes in new work.a) All kind of Soilsi) For pipes exceeding 90mm dia but not exceeding 300mm dia. |
| 17 | Providing and laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge. |
| 18 | i) 80 mm dia |
| 19 | Providing and laying S & S C.I. standard| specials such as tees, bends, collars tapers, caps etc. Heavy class) as per CPWD specification and direction of thel Engineer -in -charge. ) i. Upto 300 mm dia. |
| 20 | i) 300 mm dia |
| 21 | Providing and fixingC.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as perCPWD specification and direction of the Engineer - in - charge. |
| 22 | i)80 mm dia. A. PN - 1.0 |
| 23 | ii)100 mm dia. A. PN - 1.0 |
| 24 | Providing and fixing C.I. non-return valveofapproved quality as perof CPWD specification and direction of the Engineer - in - charge. |
| 25 | i) 100 mm nominal bore |
| 26 | Charges for push-on (Tyton) joints to centrifugally (Spun) cast iron pipes or testing of ductile iron pipes including testing of joints and excluding the cost of rubber gasket as per CPWD specificationand directionof the Engineer-in-charge |
| 27 | i)80 mm nominal bore |
| 28 | Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 29 | i)80 mm nominal bore |
| 30 | Providing earthing with perforated 40 mm dia G.I. pipe (Medium class) (12 mm dia perforation),laying of 4 mm dia GI wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with Salt and Charcoal / coke in alternate layers of 300 mm , as per standard specification and direction of the Engineer-in-charge. |
| 31 | i) For 3-phase connection with 4.00 mtr. Long G.I. pipe |
| 32 | Installation ot Submersible pump and suitable motor upto required depth with Gl column pipe in/c providing fitting fixing by necessary rubber washer, nuts & bolts, MS safety clamnp etc. as per required size and making necessary electrical connection with main Switch/starter with motor in/c commissioning&trial run as per direction of the Engineer-in-charge (Pump, motor with cable, GI pipe will be ISSued by the Department at free of cost and fabricationof GI column pipe will be paid separately). |
| 33 | i) 10000 GPH capacity |
| 34 | Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.A. External work. |
| 35 | i) 80mm dia G.I pipe with 10mm thick GI flange |
| 36 | Providing & fitting fixingof G.I. flange ( 10 mm wall thickness ) by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer-in-charge. |
| 37 | i) 100 mm dia |
| 38 | Providing and fitting fixing of pressure meter ( 0.0 - 14.0 Kg/ sqcm.) as per specification and as per specification and thedirection of the Engineer - in-charge. |
| 39 | Erection of stagging assembly for lifting & lowering work of pump motor by 100 mm/125 mm/150 mm dia GI pipe with2 legged system in/c cutting andwelding and providing ladder at oneside arrangement for climbing on the top( for fitting fixing clainpully block)in/c the cost of MS flange with 1 necessary execution of earth and fittingfixing the whole assembly in prope rEnginee in-charge.(GI pipe will issued at free of position as per directionof theCost). |
| 40 | Providing and fitting fixing with PVC insulated 3 core flat Copper cable Confornming to relevant S code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge |
| 41 | i) 4.0 sqmm |
| 42 | Providing and fixing G.I. pipes medim class as per IS 1239 amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer in -charge. with latest A. External work. |
| 43 | i) 150 mm nominal bore |
| 44 | Providing and fitting fixing steel sheet enclosed switch fuse unit(suitable for DIN fuses), triple pole with Neutral Link (TPN),415/500 Volt, L & T / Havells / BCH make etc. completeas per specification and direction of the Engineer-in-charge. |
| 45 | i) 63 amps |
| 46 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge. |
| 47 | i) 35 HP/18.5 kw Relay range within13-31 + 10% |
| 48 | Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood / plywood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inchx 9 feet ), nuts & bolts etc. for irrection of the same by1:1.5:3 cement concrete casting (1 feet x 1 feet x 2 feet) below the ground level and paintingtwo ormore coats & plastic paint as per specification and direction of the Engineer-in-charge. |
| 49 | Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge. |
| 50 | i) 10 sqmm |
| 51 | i) 16 sqmm |
| 52 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
| 53 | Providing and fitting fixing of moving iron type, Range 0-100/0-200 amps, 96 mm x 96 mm size AC Amps meter direct reading type (L & T/ AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
| 54 | Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of different Thermal release range , 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. |
| 55 | i) 32-40 Amps |
| 56 | Providing and fitting fixing3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder completeas per specification and direction of the Engineer-in-charge. |
| 57 | Providing and fitting fixing heavy duty box type (Resin filled) power factor correction capacitorL & T make etc. completeas per specification and direction of the Engineer-in-charge. |
| 58 | i) 5-15 kVAr 440 V |
| 59 | Providing and fitting fixing supply monitoring device I,e single phase preventer including selectable under voltage and selectable over voltage with delay selectable off delay 15 sec and on delay 5 sec and phase asymmetry 10 % of L&T make type SM501 3 phase 3W Cat No. MG53BF IN ip METAL DOOR 2 WAY OF crca sheet steel enclosure of L&T make Cat No DBENCO02 SD connection with necessary F.R PVC insulated single core unsheathed with multistrand bare copper conductor voltage grade 1.1 KV (11000 V) conforming to IS 694- 1990 of L&T make as per direction of the Engineer-in-charge |
