|
| 1 | MARKING KNIFE, 200 MM. LENGTH : Marking Knife 200 MM, material - High Carbon steel,(point end and chisel edge) |
| 2 | CARPENTER SQUARE 200 MM : Carpenter Square 200 MM Length blade - 200mm Blade material- -tempered steel, stock 120 MM, material -cast iron steel |
| 3 | SQUARE, BEVEL 50 MM : Square Bevel 50 mm, 200mm Tempered steel Blade adjustable with fly nut, 200 mm blade length with Stock 100 mm |
| 4 | CARPENTER MAKING GAUGE : Carpenter marking gauge. stem length 200mmx15mmx15mm - shisham wood & stock block50 x 50 x 25 mm shisham wood Thumb screw - steel point/pin - steel |
| 5 | CARPENTER MORTICE GAUGE : Carpenter mortice gauge stem length200x 15x15mm - & Stock block 50mm x 50mm x25mm, shisham wood with Thumb screw,steel pin- one fixed and other movable in brass,pin adjustable |
| 6 | SAW HAND 450 MM : Open handle made of plastic , length of blade -450mm taper blade material - high carbon steel |
| 7 | SAW TENON 300 MM. : Saw tenon 300 MM Wooden handle closed , length of blade 300mm parallel , high carbon steel |
| 8 | PLANE, JACK METAL 335 MMX50 MM : Plane jack metal 335 x50 mm cutter, stock length -335mm -carbon steel cutter, width 50mm,cast iron body, handle & knob wooden/plastic |
| 9 | CUTTER : Plane smoothing metal 200x50 mm cutter, stock length -200mm - cast steel cutter width .50mm high carbon steel |
| 10 | CHISEL, FIRMER (BEVEL) EDGE 6 MM.10,15,20 AND 25 MM.WIDTH (5 NOS.) : Chisel Firmer(Bevel edged) seasoned hard sheesham Wooden handle with ferrule(top & bottom), blade - high carbon steel width of blade6,10,15,20 and25mm(5 no’s) |
| 11 | CHISEL, MORTICE, 06,10,15 MM : Chisel Mortice seasoned Wooden handle with ferrule (top & bottom), blade - high carbon steel width of blade 6,10,15,mm (3 no’s) |
| 12 | SCREW DRIVER 300 MM. (CABNIT MAKER) : Screw driver (Cabinet maker 300 MM) Length of blade - 300mmHandle made of plastic/ Nylon, branded, Blade material - High carbon steel |
| 13 | MALLET MEDIUM SIZE : Mallet medium size, size - 6\"\" (slight curved type)material - Hard shisham wood, handle – Tapered rectangle type |
| 14 | CLAW HAMMER 500 GR : Claw hammer drop forged carbon steel with seasoned hard seesham wood handle, hardened and tempered ends, chorme plated Wt. 500 gm. |
| 15 | OILSTONE (CARBORUNDUM) UNIVERSAL SILICON CARBITE COMBINATION ROUGH AND FINE 200X50X25 MM : Oil stone (Carborundum) (Universal silicon carbide combination rough and fine) 200 x 50 x 25 mm, for sharpening |
| 16 | HAND BRUSH FOR BENCH CLEANING 450 MM : Standard size 450mm |
| 17 | MEASURING TAPE 3 METER : Measuring Tape 3 Meter, blade material- spring steel, graduation in mm, cm & inches, casing plastic or metal |
| 18 | CONTRUCTION SCALE 1 METER : Construction scale 1metre, Length - 1 meter x 25 mm x 16 gauge thickness material - stainless steel graduation in mm, cm and inches engraved on it |
| 19 | SPRING CALIPER INSIDE 150 MM : Spring caliper inside 150 mm, Length & leg - 150mmmmaterial leg - medium carbon steel, heavy duty cast alloy body hardened steel point, fully polished |
| 20 | SPRING CALIPER OUT SIDE : Spring caliper outside 150 mm Length & leg - 150mm material - medium carbon steel, heavy duty cast alloy body hardened steel point, fully polished |
| 21 | WING COMPASS 300 MM : Carbon steel 300 mm length, heavy duty cast alloy body hardened steel point, fully polished |
| 22 | RIP SAW 600 MM. : High carbon steel 600 mm, plastic handle |
| 23 | CROSS CUT SAW MM : High carbon steel, 600 mm, plastic handle |
| 24 | KEY HOLE SAW 250 MM : High carbon steel (250mm blade tapered) seasoned wooden handle |
| 25 | TRYING PLANE METAL 450 MM. X 60MM. CUTTER : 450 MM X 60 MM Cutter. |
| 26 | GAUGE CHISEL, FIRMER 6,10, 12,16, 20 MM : Width of curved blade 6mm,10mm,12mm,16mm and 20mm material high carbon steel seasoned hard seeshamwood handle |
| 27 | GAUGE CHISEL, SCRIBING 6,10,12, 16,20MM : Width of curved blade 6mm,10mm,12mm,16mm and 20mm material high carbon steel, seasoned hard seeshamwood handle |
| 28 | BALL PEEN HAMMER 600 GRS : Weight - 600gms Handle - hard shisham wood body - forged steel |
| 29 | CROSS PEEN HAMMER 600 GRS : Weight - 600gms,with wooden handle |
| 30 | SCREW DRIVER 450 MM : Cabinet type , length of blade -450mm, handle plastic/ nylon , blade - toughened steel |
| 31 | SCREW DRIVER 250 MM : Cabinet type, length of blade -250mm, handle plastic/ nylon, blade - toughened steel |
| 32 | SCREW DRIVER 150 MM : cabinet type, length of blade -150mm, handle plastic/ nylon , blade - toughened steel |
| 33 | PINCER 50 MM : Drop forged from Carbon Steel. Body Hardened & tempered.Heads Polished, length 200 mm. |
| 34 | FILE HALF ROUND 2 ND CUT 250MM: Material - high carbon steel with hard seesham wood handle |
| 35 | FILE HALF ROUND WOOD RASP BASTAD MM : Material - high carbon steel with hard seesham wood handle, 250mm |
| 36 | FILE SLIM TAPER 100 MM : Material - high carbon steel hard seesham wood handle, 100 mm |
| 37 | FILE SLIM TAPER 150 MM: Material - high carbon steel with hard seesham wood handle, 150 mm |
| 38 | HANDS DRILL 6 MM. CAPACITIES: MAX DRIL DIA 6MM, RATED VOLTAGE- LAGGING 110-220VOLT, NO OF LOAD SPEED 0-3000RPM, WEIGHT 2KG FRQ. 50-60 HTZ, RATED INPUT VOLTAGE 550 WATT |
| 39 | HAND AUGER 10,12,14,16,18,20,22,25MM : Material - high carbon steel handle - wooden |
| 40 | CENTRE BITS 6,8,10,12 : Centre bits 6,8,10,12 mm material - high carbon steel. |
| 41 | COUNTER SINK BIT ROSE TYPE 12 MM : Material H.S steel,12 mm |
| 42 | BREAST DRILL 6 MM.CAPACITY : Cast Iron Body (Graded Casting) Wooden Handle for gripping Heavy Duty Precision 3 Jaw Drill Chucks 4.6mm capacity manually operated |
| 43 | CENTRE PUNCH 5 : H.C steel,5mm, Length 100 mm |
| 44 | ‘G’ CLAMP 100 : Size-100mm, frame - cast/ malleable body spindle - steel handle with swivel head |
| 45 | ‘G’ CLAMP 150 MM : Size-150mm, frame - cast/ malleable body spindle - steel handle with swivel head |
| 46 | ‘G’ CLAMP 250 MM :Size-250mm, frame - cast/ malleable body spindle - steel handle with swivel head |
| 47 | ‘T’ BAR CRAMP 0.6 METER : Size - 0.6meter , material - malleable/SG Iron jaws, fine thread spindle (jaws) rod - steel |
| 48 | ‘T’ BAR CRAMP 1.25 : Size - 1.25meter material - malleable/SG Iron jaws, fine thread spindle (jaws) rod - steel |
| 49 | T’ BAR CRAMP 1.75 METER : Size - 1.75meter material - malleable/SG Iron jaws, fine thread spindle (jaws) rod - steel |
| 50 | CARPENTER VICE 250 MM JAWS : Materials :- Body and sliding jaw : SG cast Iron of guaranteed strength.Slide Bars : Solid SteelMain Screw :High Quality SteelBody- SG Cast iron with steel spindle |
| 51 | SAW SHARPENING VICE 250 JAWS : Materials:- Body and sliding jaw : SG CAST Iron of guaranteed strength.Slide Bars : Solid SteelMain Screw : High Quality SteelBody-SG Cast iron with steel spindle |
| 52 | CARVING TOOLS SET : MaterialsBlades : High precision chrome vanadium alloy steelHandles : Seasoned hard wood, front end covered by steel Polished ferrule |
| 53 | GOGGLES PAIR : Good quality plane glass |
| 54 | GLASS CUTTER : Glass cutter Diamond tip |
| 55 | NAIL PUNCH : Nail punch length - 100mm material - H.C. steel, knurled center portion |
| 56 | CARPENTER’S WORK BENCH 2400X920X800 mm height : Body cast iron , top seasoned shisham hard wood, two side planks 250mmx50mm, centered well top30mm,side thickness 100mm, (2400x920x800mm) |
| 57 | OIL CAN: CAPACITY 250 ML, Wesco Type |
| 58 | PORTABLE CIRCULAR SAW MACHINE : 1150 W powerful motor, speed 5000 rpm, Max depth of cut : 65mm With accessory. |
| 59 | POWER DRILL MACHINE : Portable power drill having hammering option capacity- 20 mm RPM- 2500, watt- 500, body aluminium with accessory |
| 60 | PORTABLE SANDER MACHINE : 170 watt powerful motor, orbits /strokes, 13500/min, wt-1.2kg (approx) With accessory, body aluminium |
| 61 | PORTABLE JIG SAW MACHINE : Minimum 700 W powerful motor, Stroke length 26mm, capacity in mm metal 4 wood-130.,4stroke pendulum action, Stroke 0-3100/min, With accessory, body aluminium |
| 62 | PORTABLE ROUTER MACHINE : 800W powerful motor , speed 27000rpm, collect size 6.35mm,plunge stroke 35mm, With accessory, body aluminium |
| 63 | POWER SCREW DRIVER : Body aluminium 440 watt powerful motor speed 0-1000 rpm maximum with accessory |
| 64 | Wood Lathe Machine along with motor and full set of tools : 150 mm height of counters ; 1.75 m bed ; center distance 150 mm 3 hp 3 phase motorTools :flat and curved tools made of high carbon steel with wooden handles sizes of face - 10mm, 15mm, 20mm, 25mm, 30mm and 35mm ; carving tool kit |
| 65 | WOOD PLANNER MACHINE alongwith motor : 3HP powerful motor, planner 13 inch. |
| 66 | UNIVERSAL WOOD WORKING MACHINE along with motor : Universal wood working machine - length of bed: 1155/45 inch, height centre: 8 inch, admit between centre: 48 inch, approx. spindle speed:700/ 1400/2800, power: 2 HP, 1440 RPM, SINGLE Phase with motor functionto be reqd, planning, sawing, turning, mortising, grooving, grinding ,etc., Double jack. |
| 67 | BAND SAW MACHINE WITH PROVISION AND MOTOR : able to cut 24\" wood ; motor 3HP 3 phase motor with starter. |
| 68 | BAND SAW MACHINE WITH PROVISION AND MOTOR : able to cut 42\" wood ; motor 10 HP 3 phase motor with starter |
| 69 | 200 ltr ; 2 HP motor along with hose pipe |
| 70 | Spray Gun |
| 71 | Sewing Machine : Manually foot operated ;200 stitches / min |
| 72 | Industrial Sewing Machine : Heavy duty ; 4000-5000 stitches/ min ; should be able to stitch cotton Lenin leather rexine and other leather like materials |
| 73 | Air Compressor based nail gun : Air compressor based nail gun ; applicable to wooden furniture with adjustable nail depth |
