Procurement Of Machining And Cutting Tools For Central Workshop Ntpc Procurement Of Machining And Cutting Tools For Central Workshop Ntpcsipat. , Hssparll Shank End Mill 5Mm , Hss Parrellel Shank End Millsize-6 Mm , Hss Parallel Shank End Mill Cutter 8 Mm , Hss Parallel Shank End Mill Cutter 10 Mm , Hss Parallel Shank End Mill 12 , Hss End Mill Cutter Parall Shank14mm , Hss Parallel Shank End Mill Cutter 16 Mm , H.S.S. Parallel Shank End Mills, 18.0 Mm , Hss Parallel Shank End Mill 20 , Hss Parallel Shank Endmill Cutter 22Mm , Hss End Mill With Morse Taper Shank 25 , Hss Hand Tap Ground M5x0.5 , Hss Handtapes Size: M5*0.8 ( Set Of 3Pcs ) , Hss Hand Tap, M6x0.75Mm, Metric Fine Pitch , Hss Tap & Handle Metric Fine M8x1.0 , Taps Is:6175 Hand M10x1 , Hss Hand Tap, M10x1.25Mm , Metric Fine Pit , Hss Hand Tap;M10x1.5; ( Mcp ) ;Set Of 3;Pt3 , Hss Hand Taps:M12x1.5 , Hss Hand Taps:Metric Fine :M14*1.25Mm , Taps Set:M3-24 F:M14x1.50Mm , Tap Set Mf Series-M16x1.5Mm , Hand Tap Set ( Mf Series ) Size-M18x1.5 , Hss Hand Taps:Metric Fine:M18*2.0Mm , Hss Hand Tap;M18x2.5 ( Mcp ) ;Set Of 3 , Taps Rougher: Mtrc.Hand-M1-2.5Rh, C, M20x1 , Tap Set-Mf Series-M20x1.5Mm , Taps Is:6175 Hand M20x2 , Hss Taps , Size -20X2.5Mm, Pitch Standa , Taps Is:6175 Hand M24x2 , Hss Thread Pipe Taps Bsp, 7 / 8 X 14 Tpi , Hss Hand Tap Bsf Bs-949:3 / 4X12tpi , Hss Hand Tap Bsf Bs-949:1X10tpi , Taps Hss Hand Tap Bsw 9 / 16 Inch , Pdnnr-Is:14863:Pdnnr 2525 M15 , :Kit-Tool Holder:Turning-Pclnr 2525 M12 , Tmax Tool Hldr: Pclnr 4040 S 19, Is:14863 , Cutting Tools-Is:14863-Pclnl4040s19 , Boring Bar: S32t Pclnr 12, Is: 14864 , Boring Bars-Is:14864:S40v Pclnr 12 , Is:14863-Prdcn:3232 P20 , :Kit-Tool Holder:Turning-Srdcn 2525Mob , Roumbic Insert, Finishing, Dnmg 110404 Mf3 , Roumbic Insert, Finishing, Dnmg 110408 Mf3 , Indx Insrt 55Deg.Dnmg150604;S4p30 / Tpc25 , Insert: Cnmg 120404, Iso:1832 ( Is:9897 ) , Turning Tool, Insert Cnmg120408, Tn200 , Insert: Cnmg 190612, Iso:1832 ( Is:9897 ) , Insert:Is:9897:Rcmx 2006M0 , Insert:Is:9897:Rcmt 1204M0 , Indexable Insert Tpkn Pdr S6 P40 Sandvik , Insert- Ext Thread, W.O.No. -44315033 , Insert 44315524 Uncoated Ttr 4.15 Mm , Hss Tool Bits, S-500 Grade, Is: 11143-84 , Tip Tool Iso1r 2020 K20; Is13742 , Tun Carbidebrazed Tip Tool;Iso1r2525;P10 , Straight Turning Tool;Is01;R-110-4040 S4 , Cranked Finishing Tools Iso-3R 2020 P30 , Cranked Finishing Tools Iso-3R 2525 P30 , Cranked Turn Facing Tool Iso 3R4025p30 , Carbide Tip Tool Iso6r 2020 P30; Is13742 , Tools Single Point Iso 6 R -2525X32mm , Partng Tool-Iso7, 16X10x110 P-30 / 1616P-30 , Boringand Facing Tool Iso9r0808p30 , Boring And Facing Tooliso9r1010p30 , Is:13743-Round Boring Tool:1212X140mm , Carbide Tip Tool Iso9r1616 P30 , Boring Tool Iso 8R 2020 P 30 , Carbide Tipped Boring Tool:2525Mmxp20 , Boring Tool Iso-9, 25X300 , Internal Threading Tool R-166 16X140 , Internal Threading Tool 166, P20 10X10 Mm , Drill: 4.00Mm ( 4.0X10.0Mm Centre Drill A ) , Hss Center Drill 5Mm / Body 12.5Mm , Hss Center Drill 6.3Mm / Body 16Mm , Centre Drill, Hss, Size: 8.0 X 20 Mm , Drills:Is:7822:Dia. 10.00 Mm ( 10.0X25.0Mm , Drill Chuck Is:2243 Type-H 20 Mm , Carbide Tipped Dead Centre:Morse-6 , Drill Bit Size 3.0 Mm , Hss Taper Shank Twist Drill Bit Size 4 M , Drills:Is:5103:Dia 5 Mm , Is: 5103 Twist Drill , Dia 5.20 , Hss Taperdrill ( Is-5103 / 69 ) -6.8 Mm , Is: 5103 Twist Drill , Dia 8.0 , Hss Twist Drills Bit Size 10.0 Mm , Hss Twist Drill 10.2 Mm As Per Is:5103 , Hss Taper Shunk Twist Drill Bit Size 30 , Hss Tapr Shnk Twst Dril ( Is-5103 / 69 ) 40Mm , Hss Taper Shank Twist Drill 7X250 Mm , S.C.Drill 8.5 Mm , S.C.Drill 6.8 Mm , S.C.Drill 6.0 Mm , Insert: Is:9897-Cnga 120408Emt Wbh25p , Insert: Is:9897 Dnga 150408Emt Wbh25p => Limited
