Installation Of Gym Equipments And Children Playing Equipments At Ito Colony, Pedder Road, Mumbai During 2021 - 22.-1. Ordinary Portland Cement ( Grey ) 43 Grade 2. Steel Reinforcement 3. Paints Synthetic Enamel / Exterior Acrylic Obd / Plastic Paints / Cement Primer. 4. Steel Primer / Wood Primer 5. Nuts / Bolts & Screws 6. 18 Mm Granite Stone / Marble 7. Steel Section Like Angle, Tee, Square Bar 8. All Gym Equipments-1 Collecting And Disposal Of Building Malba / Waste Material Etc. By Mechanical Transport Into The Approved Dumping Ground Outside The Building Premises Including Loading Unloading And Stacking As Per Direction Of Engineer In Charge. ( Lead Upto 30Km ) . 2 Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As 10 Sqm On Plan Including Getting Out And Disposal Of Excavated Earth Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In- Charge: 2.1 All Kinds Of Soil 3 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 3.1 1:2:4 ( 1 Cement : 2 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) 4 Half Brick Masonry With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 3.5 In Superstructure Above Plinth Level Up To Floor V Level. 4.1 Cement Mortar 1:4 ( 1 Cement :4 Coarse Sand ) 5 Providing And Fixing 18Mm Thick Gang Saw Cut Mirror Polished ( Premoulded And Prepolished ) Machine Cut For Kitchen Platforms, Vanity Counters , Window Sills , Facias And Similar Locations Of Required Size Of Approved Shade, Colour And Texture Laid Over 20Mm Thick Base Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) With Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing Moulding And Polishing To Edge To Give High Gloss Finish Etc. Complete At All Levels.5.1 Granite Stone Slab Colour Black, Cherry / Ruby Red 5.1.1 Area Of Slab Over 0.50 Sqm 6 Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 7 Providing And Fixing Stainless Steel ( Grade 304 ) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature ( Wherever Required ) And Fitting The Same With Necessary Stainless Steel And Bolts Complete, I / C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineerincharge, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc. ) . 8 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : 8.1 Two Or More Coats On New Work 9 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : 9.1 Old Work ( One Or More Coat Applied @ 0.90 Ltr / 10 Sqm ) . 10 Taking Out Existing Cc Interlocking Paver Blocks From Footpath / Central Verge, Including Removal Of Rubbish Etc., Disposal Of Unserviceable Material To The Dumping Ground, For Which Payment Shall Be Made Separately And Stacking Of Serviceable Material Within 50 Metre Lead As Per Direction Of Engineer-In-Charge.11 Providing And Laying Factory Made Chamfered Edge Cement Concrete Paver Blocks In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc, Of Required Strength, Thickness & Size / Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over 50Mm Thick Compacted Bed Of Sand, Compacting And Proper Embedding / Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand. Complete All As Per Direction Of Engineerin- Charge. 11.1 60Mm Thick Cement Concrete Paver Block Of M-35 Grade With Approved Colour, Design & Pattern. 12 Providing And Placing / Fixing In Position Epdm 6Mm & 30Mm Rubber Crumbs ( Item Code: Epdm 36Mm ) Of Fun Play Systems Pvt. Ltd. Or Equivalent At Site Complete As Per Direction Of Engineer-Incharge. 13 Providing And Placing / Fixing In Position Ski Trainer With Necessary Fittings ( Item Code: Fnf014 ) Of Fun Play Systems Pvt. Ltd. Or Equivalent At Site Complete As Per Direction Of Engineer-In-Charge. 14 Providing And Placing / Fixing In Position Fun Walker Single With Necessary Fittings ( Item Code: Fnf004 ) Of Fun Play Systems Pvt. Ltd. Or Equivalent At Site Complete As Per Direction Of Engineer-In-Charge. 15 Providing And Placing / Fixing In Position Chest Press Cum Shoulder Press With Necessary Fittings ( Item Code: Fnf016 ) Of Fun Play Systems Pvt. Ltd. Or Equivalent At Site Complete As Per Direction Of Engineerin- Charge. 16 Providing And Placing / Fixing In Position Fun Walker Single With Necessary Fittings ( Item Code: Fnf020 ) Of Fun Play Systems Pvt. Ltd. Or Equivalent At Site Complete As Per Direction Of Engineer-In-Charge.17 Providing And Placing / Fixing In Position Leg Lift Post With Necessary Fittings ( Item Code: Fnf011 ) Of Fun Play Systems Pvt. Ltd. Or Equivalent At Site Complete As Per Direction Of Engineer-In-Charge. 18 Providing And Placing / Fixing In Position Fun Rider With Necessary Fittings ( Item Code: Fnf002 ) Of Fun Play Systems Pvt. Ltd. Or Equivalent At Site Complete As Per Direction Of Engineer-In-Charge. 19 Providing And Placing / Fixing In Position Abs Trainer- Roto With Necessary Fittings ( Item Code: Fpspcl187 ) Of Fun Play Systems Pvt. Ltd. Or Equivalent At Site Complete As Per Direction Of Engineer-Incharge. 20 Providing And Placing / Fixing In Position Shoulder Twirl Double- New With Necessary Fittings ( Item Code: Fpspcl248 ) Of Fun Play Systems Pvt. Ltd. Or Equivalent At Site Complete As Per Direction Of Engineer-In-Charge. 21 Providing And Placing / Fixing In Position Pendulum With Necessary Fittings ( Item Code: Fnf012 ) Of Fun Play Systems Pvt. Ltd. Or Equivalent At Site Complete As Per Direction Of Engineer-In-Charge. 22 Providing And Placing / Fixing In Position Multi Play Fun System- Special With Necessary Fittings ( Item Code: Mpes Spcl ) Of Fun Play Systems Pvt. Ltd. Or Equivalent At Site Complete As Per Direction Of Engineer-In-Charge. 23 Providing And Placing / Fixing In Position Single Swing With Toddler Seat With Necessary Fittings ( Item Code: Fpspcl81 ) Of Fun Play Systems Pvt. Ltd. Or Equivalent At Site Complete As Per Direction Of Engineer-In-Charge. 24 Providing And Placing / Fixing In Position Loop Climber With Necessary Fittings ( Item Code: Fpth40 ) Of Fun Play Systems Pvt. Ltd. Or Equivalent At Site Complete As Per Direction Of Engineer-In-Charge. 25 Providing And Placing / Fixing In Position Woody Go Round With Toddler Seat With Necessary Fittings ( Item Code: Fpspcl294 ) Of Fun Play Systems Pvt. Ltd. Or Equivalent At Site Complete As Per Direction Of Engineer-In-Charge.
