Supply, Testing, Installation , Commissioning And Demonstration Of Hand Tools, Instruments, Equipment And Machinery Etc. For The Course Of Fitter Hydraulic And Pneumatic System.- 1 Fitter:-Hydraulic & Pneumatic System. 2 Hydraulic Trainer Kit Specification: - Each Consisting Of The Following Matching Components And Accessories: I. Hydraulic Power Pack- With ( 1 ) External Gear Pump Having A Delivery Rate Of 2.5 Lpm, ( Approx. ) @ 1400 Rpm Operating Pressure 60 Bar, Coupled To A Single-Phase Ac Motor ( 230 V Ac ) Having Start Capacitor And On / Off Switch And Overload Protection, ( 2 ) Pressure Relief Valve Adjustable From 0 – 60 Bar, ( 3 ) Oil Reservoir, ≥5 Litres Capacity Having Sight Glass, Drain Screw, Air Filter, And P And T Ports.- 1 No. Ii. Pressure Relief Valve- Pilot-Operated- 1 No. Iii. Drip Tray, Steel- Size 1160 Mm X 760 Mm.- 1 No. Iv. Pressure Gauge- Glycerin-Damped, Indication Range Of: 0 – 100 Bar- 1 No. V. Four-Way Distributor- With Five Ports, Equipped With A Pressure Gauge- 1 Set. Vi. Double Acting Hydraulic Cylinder- With A Control Cam, Piston Diameter16 Mm, Piston Rod Diameter10 Mm, Stroke Length 200 Mm.- 1 No. Vii. Suitable Weight- For Vertical Loading Of Hydraulic Cylinder- 1 No. Viii. Mounting Kit For Weight- For Realizing Pulling And Pushing Load.- 1 No. Ix. 3 / 2-Way Directional Control Valve- With Hand Lever Actuation.- 1 No. X. 4 / 2-Way Directional Control Valve- With Hand Lever Actuation.- 1 No. Xi. 4 / 3-Way Directional Control Valve- Closed-Centre Position, With Hand Lever Actuation.- 1 No. Xii. Non-Return Valve.- 1 No. Xiii. Pilot-Operated Check Valve- Pilot To Open.- 1 No. Xiv. One-Way Flow Control Valve- With Integrated Check Valve.- 1 No. Xv. T-Connector With Self Sealing Coupling Nipples ( 2 Nos. ) And Quick Coupling Socket ( 1 No. ) .- 2 Set. Xvi. Profile Plate, Anodised Aluminium, 1100X700 Mm, With Carriers, Mounting Frames And Mounting Accessories ( To Be Fitted Onto The Hydraulic Workstation ) .- 1 Set. [ 5 ( Five ) Years Annual Maintenance Contract ( Amc ) Beyond Normal Guarantee / Warranty Period Is Applicable For This Item. Yearly Price ( Price For One Year ) Of 5 ( Five ) Year Annual Maintenance Contract ( Amc ) Is To Be Quoted In A Separate Column In Boq. ] 3 Hydraulic Workstation Specification: - With 40 Square Mm Aluminium Profile Legs, Wooden Work Surface, And One Pedestal Drawer Unit Having 5 Drawers, Each With Handles And Individual Locks, On Metallic Full Panel Drawer Slide: ( 1 ) Work Table – Size ( Approx. ) L1200mmxw900mmxh900mm, With Four Castor Wheels Including Two Lockable Wheels At The Front Side, ( 2 ) Drawer – Size ( Approx. ) – L460mmxw495mm Xh158mm Each, And Overall Size Of Drawer Unit ( Approx. ) - L470mmxw495mmxh825mm And ( 3 ) Drawer Slide Height ( Approx. ) 85Mm. [ 5 ( Five ) Years Annual Maintenance Contract ( Amc ) Beyond Normal Guarantee / Warranty Period Is Applicable For This Item. Yearly Price ( Price For One Year ) Of 5 ( Five ) Year Annual Maintenance Contract ( Amc ) Is To Be Quoted In A Separate Column In Boq. ] 4 Cut-Section Models Specification: - For Hydraulic Components. ( I ) External Gear Pump Of Size Having Delivery Rate 2.5 Ltr. / Min, At 1400 R.P.M., On Pressure- 60 Bar., ( Ii ) Double Acting Cylinder Of Size Having Stroke Length 200 Mm, Bore Dia- 20 Mm., ( Iii ) 5 / 2 ( 5 Port 2 Position ) Hand Operated Directional Valve., ( Iv ) 4 / 3 ( 4 Port 3 Position ) Hand Operated Directional Valve., ( V ) Non-Return Valve Of Inlet Dia 1 ( One ) Inch And Outlet Dia 1 ( One ) Inch., ( Vi ) Pressure Reliefvalve Of Inlet Dia 1 ( One ) Inch And Outlet Dia 1 ( One ) Inch., ( Vii ) Pilot Operated Check Valve Of Inlet Dia 1 ( One ) Inch And Outlet Dia 1 ( One ) Inch., ( Viii ) One-Way Flow Control Valve Of Inlet Dia 1 ( One ) Inch And Outlet Dia 1 ( One ) Inch., ( Ix ) Pressure Gauge Of Size Having Capacity 120 Psi Or Higher., ( X ) Accumulator Of Size Having Capacity 1 ( One ) Ltr. Or Higher.
