}

Nit No. 18(21-22)/Cwa(Wns)Ii Hp/Item No. 02 Procurement Of Oiml/Nabl Certified Analytical Weights And Other Safety Items For Quality Control Laboratory, Haiderpur (Iso-9001-2015 Certified). , E2 Class Certified And Nabl Approved Weights. Specifications Fo, Delhi-Delhi

Delhi Jal Board has published Nit No. 18(21-22)/Cwa(Wns)Ii Hp/Item No. 02 Procurement Of Oiml/Nabl Certified Analytical Weights And Other Safety Items For Quality Control Laboratory, Haiderpur (Iso-9001-2015 Certified). , E2 Class Certified And Nabl Approved Weights. Specifications Fo. Submission Date for this Tender is 10-03-2022. Footwears Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

31291447
Nit No. 18(21-22)/Cwa(Wns)Ii Hp/Item No. 02 Procurement Of Oiml/Nabl Certified Analytical Weights And Other Safety Items For Quality Control Laboratory, Haiderpur (Iso-9001-2015 Certified). , E2 Class Certified And Nabl Approved Weights. Specifications Fo
Open Tender
Indian
Delhi
Delhi
10-03-2022

Tender Details

Nit No. 18(21-22)/Cwa(Wns)Ii Hp/Item No. 02 Procurement Of Oiml/Nabl Certified Analytical Weights And Other Safety Items For Quality Control Laboratory, Haiderpur (Iso-9001-2015 Certified). , E2 Class Certified And Nabl Approved Weights. Specifications For E2 Class Certified And Nabl Approved Weights- Class E2, Weights Or Sets Of Weights Shall Always Be Accompanied By A Nabl Calibration Certificate. In Design , Pattern And Moc Etc It Will Strictly Follow Omil International Recommendations. The Weights Will Be Supplied From 1Mg To 200 Grams (23 Weights) 1Mg-1,2Mg-2,5Mg-1,10Mg-1,20Mg-2,50Mg-1,100Mg-1,200Mg-2,500Mg-1,1Gm-1,2Gm-2,5Gm-1,10Gm-1 20Gm-2, 50Gm-1,100Gm-1,200Gm-2(23 Nos. Weights) Minimum Accuracy Class Of Weights Used With Weighing Instruments The Accuracy Classes Of Weights Used With Weighing Instruments Shall Be In Accordance With The Requirements Of Oiml R 76 “No Automatic Weighing Instruments” Maximum Permissible Errors On Verification And Expanded Uncertainty Maximum Permissible Error Shall Be As Per Table: 1 Of Oiml International Recommendations For Each Weight, The Expanded Uncertainty U For K= 2 (See Annex B) Of The Conventional Mass Shall Be Less Than Or Equal To One-Third Of The Maximum Permissible Error Given In Table 1, Except For Class E, Weights (No Specific Requirement Relating To U For Class E, Weights; However, U Shall Be Significantly Less Than The Maximum Permissible Error). The Reference Conditions Applicable To The Adjustment Of Standard Weights Are As Follows: - Standard Reference Density: 8 000 Kg M³ - Ambient Air Density: 1.2 Kg M³ - Equilibrium In Air At 20°C, Without Correction For Air Buoyancy. For Each Weight, The Conventional Mass, Mc (Determined With An Expanded Uncertainty According To Oiml International Recommendations- 3.2) Shall Not Differ By More Than The Difference: Maximum Permissible Error Minus Expanded Uncertainty, From The Nominal Value Of The Weight, Design And Pattern Of Weight: Weights Less Than One Gram Shall Be Flat Polygonal Sheets Or Wires, With Appropriate Shapes Which Permit Easy Handling. The Shapes Shall Be Indicative Of The Nominal Value Of The Weights. Weights Of One Gram May Be Flat Polygonal Sheets Or Wires. The Shape Of Weights Not Marked With Their Nominal Value Shall Conform To The Following Table: Nominal Vales In (Mg) 5-50-500 2-20-200 For All Reference International Recommendations Of Omil Will Prevails. Those Weights May Also Have A Cylindrical Or Slightly Tapered Conical Body. The Height Of The Body Shall Be Approximately Equal To The Mean Diameter; The Height Shall Be Between 3/4 And 5/4 Of That Diameter. Those Weights May Also Be Provided With A Lifting Knob Which Has A Height Between The Mean Diameter And Half-Diameter Of The Body. Material Of Constructions: The Metal Or Alloy Used For Weights Shall Be Practically Non-Magnetic (Magnetic Susceptibility Not To Exceed K = 0.03). The Hardness Of This Material And Its Resistance To Wear Shall Be Similar To Or Better Than That Of Austenitic Stainless Steel. Density: The Density Of Moc Shall Be As Per Table-3 Of Oiml International Recommendations. Packing: Shall Be Supplied In Wooden/ Plastic Box , Automatic Shoe Cover Dispensing Machine 1. Material Abs Plastic 2. Power Ac 220 V 50 Hz 3. Capacity: 100 Covers. 4. Weight : 20 Kgs 5. Color : White 6. Dimensions : Height : 75 Cms, Width : 31 Cm, Depth : 63 Cms The Automatic Shoe Cover Dispenser Should Be Touch Free And Easy To Use. It Has A Sensor That Starts Working As Soon As We Put Our Shoe On The Machine. It Wraps Our Shoe In The Plastic Bag And Maintains Hygiene In The Work Place. The Auto Shoe Cover Dispenser Has Intelligent Control With Safety Protection, Fault Alarm And Error Display. It Covers The Shoe With A Long Lasting And Thick Polypropylene Fabric That Even Protects The Shoes From That Even Protect The Shoes From Tearing And Helps To Keep The Floor Clean And Spotless. This Dispenser Has An Inbuilt Led Display That Shows The Number Of Films, Temperature, Time And Other Things On The Machine. The Machine Is Convenient To Re-Use. It Has A Beautiful Appearance And Can Amaze The Guests With Its Automatic Features. , Nitrile Gloves , Shoe Cover , Safety Goggles , Apron

Key Value

Document Fees
INR 500 /-
EMD
INR 10000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail