Providing / Installation / Commissioning Of All Lab Equipments Including All Carriages, Lifts And Leads Complete Job Under 4059-Lab. Boq - Is Sieve Sets ( 20Cm Dia Brass Frame ) ( As Per Specifications Of Is: 460 ) Sizes ( Mm / Micron-Μ ) A ) 10.00Mm, B ) 4.75 Mm, C ) 2.36 Mm, D ) 2.00 Mm E ) 1.18 Mm , F ) 1.00 Mm , G ) 600 Μ H ) 425 Μ I ) 300Μ J ) 150 Μ, K ) 90Μ, L ) 75Μ Pan And Cover , Is Sieve Sets ( As Per Specifications Of Is: 460 ) Iss Gi-Frame Sieve Set, ( Size 30 Cm Dia ) A ) 125 Mm, B ) 106 Mm, C ) 90 Mm, D ) 80 Mm, E ) 63 Mm , F ) 53 Mm, G ) 45 Mm , H ) 40 Mm, I ) 37.50 Mm, J ) 31.0 Mm, K ) 26.5 Mm, L ) 22.40 Mm, M ) 20 Mm, N ) 19 Mm, O ) 16 Mm, P ) 13.2 Mm, Q ) 12.5 Mm, R ) 11.2 Mm, S ) 10.0 Mm, T ) 9.5 Mm, U ) 6.3 Mm , V ) 5.6 Mm, W ) 2.8 Mm , X ) 4.75 Mm , Y ) 3.35 Mm , Z ) 2.36 Mm. ( Complete And Operational In All Respects ) , Laboratory Concretespecimen Cube Moulds :- As Perrelevant Is Specifications ( Is : 10086 ) Cube Moulds For Preparing Concrete Spcecimens For Checking Compressive Strength Of Cement Concrete, For Size Of 150 Mm , Water Bath ( Reputed Make ) Thermostatically Controlled Or With Digital Controller Cum Indicator, Doubled Walled, Inner Chamber Made Of Non- Rusting / Stainless Steel, Outer Body Made Of Ss And Minimum Dimensions ( 425 X 325 X 100 ) Mm Or Better , With Temperature Rangeof 5 ̊ Cto 100 ̊ Cwith Precision Of + 0.5 ̊ C, Run By 220 V ( + 5% ) 50 Hz, Single Phase Ac Supply . Equipments Must Beof Good Make / Manufacture And Finish ( Complete And Operational In All Respects. ) , Electric Hot Air Oven ( Reputed Make ) Superior Laboratory Electric Oven, Thermostatically Controlled Or With Digital Controller Cum Indicator With Safety Alarm. It Must Be Double Walled, With Outer Body Made Of Ms Powder Coated And Inner Made Of Stainless Steel. It Must Have Provision For Horizontal Ribs For Adjusting Trays At Any Height. Equipment Must Have Side Heating / Air Circulating Fan, To Distribute The Temperature Range 50 Degree Cto 250 Degree C +1 Degree C , With Air-Ventilators.Thesize Of Oven Must Be 450 X 450X450 Cm, With Size Tolerance+ 10 Mm. Equipments Must Operate Under 220 V ( + 5% ) , 50 Hz Single Phase Ac Supply. Equipments Must Beof Good Make / Manufacture And Finish ( Complete And Operational In All Respects. ) , Precision Electronic / Digital Balance, With Dual Power Operation ( Ac / Battery ) 400 Gm- 600 Gm Capacity.With Read Out Of At Least 0.01 Gm, Reproducibilty Of 0.01Gm ) ( Complete & Operational In All Respects ) , Precision Electronic / Digital Balance, With Dual Power Operation ( Ac / Battery ) Superior Brand Precision Digital Balance ( 5 Kg ) Capable Of Measuring At Least 1.0Gm To 5 Kg With Permissible Error. ( Complete & Operational In All Respects ) , Precision Electronic / Digital Balance, With Dual Power Operation ( Ac / Battery ) Superior Brand Precision Digital Balance ( 30 Kg ) Capable Of Measuring At Least 5.0 Gm To 30 Kg With Permissible Error. ( Complete & Operational In All Respects ) , Precisioninfrared Thermometer -Digital Non-Contact Infrared Thermometer ( Fluke Or Superior Make ) , With Backlight Lcd Display, Battery Powered, With Minimum Operational Temperature Range Of -20 Degree C To 300 Degree C ( Or Better ) , Display Resoultion Of At Least 0.1˚C / ˚ F, Suitable Spectral Response, Class-2 Laser Power With Display Hold Feature. ( Complete & Operational In All Respects ) , Precisionprobe Type Hermometer -Digital Contact Typeprobethermometer ( Superior Make ) , Battery Powered, With Minimum Operational Temperature Range Of -50Degree C To 300 Degree C ( Or Better ) , Display Resoultion Of At Least 0.1˚C / ˚ F, ( Complete & Operational In All Respects ) , Aggregate Impact Testing Machine ( As Per Specifictaions Of Is : 9377 ) Standard Aggregate Impact Testingmachine For Determination Of Impact Valuefor Small Size Mineral Aggregates / Rocks. Equipments Must Beof Good Make / Manufacture And Finish ( Complete & Operational In All Respects ) , Enamel El-Trays: Sampling Purpose Enamel Tray / Plates / Bucket Of Following Minimum Sizes. ( Complete & Operational In All Respects ) , 250 X300 Mm Tray , 450 X 600 Mm Tray , Flakiness Apparatus ( Shape Test ) As Per Is Specifications / Sp-36, Is : 2386 ( Part-1 ) Equipment Must Consist Of Following: Thickness Gauge Manufactured From The Haeavy Guage Steel With Is-Certification Stamp. Equipment Must Be Of Good Make / Manufacture And Finish ( Complete & Operational In All Respects ) , Elongationapparatus ( Shape Test ) :-As Per Is Specifications / Sp-36, Is : 2386 ( Part-1 ) Equipment Must Consist Of Following: Length Gauge Manufactured From The Superior Steel, Mounted On A Hardwood Base, With Is-Certification Stamp. Equipment Must Be Of Good Make / Manufacture And Finish. ( Complete & Operational In All Respects ) , Standard Vicat Apparatus ( Cement Testing ) Equipment Must Be Provided For Determination Of Consistency Of Standard Cement Paste And Initial-Final Setting Times Of Cement. Equipment Must Be In Confirmation Withis: 5513-1976 With Following Minimum Specifications 1 ) A Stable Frame With A Vertically Movable Rod To Accommodate Consistency Plunger And Setting Time Neeedless And Having A Cap At The Top. 2 ) Vicat Mould In The Form Offrustum Of A Cone With Internal Diameter Of 60 Mm At The Top, 70 Mm At The Bottom And A Height Of 40 Mm , 3 ) Split Type Vicat Mould With Clamping Ring. 4 ) . Ms-Base Plate And Glass Base- Plate For The Mould. 5 ) Initial Setting Time Needle. 6 ) Final Setting Time Neddle. 7 ) Standard Consistency Plunger . ( Equipment / Supply Must Be Of Superior Make / Manufacture And Finish Completein All Respects ) , Le Chatelier Soundness Testapparatus ( Cement ) :-Le Chatelier Moulds, With Is Certification , Must Be Supplied For Determination Of Soundless Of Cement And Class A And Class- B Limes. The Apparatus Must Be In Conformation With Is : 5514, Is : 1727, Is: 2645, Is: 4031 And Is: 6932 ( Part -9 ) With Following Minimum Specifications 1 ) One Split Cylinder Mould 30 Mm Dia X 30 Mmhigh, Made Of Spring Brass With Two Indicator Arms Stronglysoldered On Either Sides Of The Split. 2 ) Two Glass Plates 3 ) One Lead Weight Approx. 100 Gms . ( Equipment / Supply Must Be Of Superior Make / Manufacture And Finish, Completein All Respects ) , Slump Test Apparatus ( As Per Is Specifications Is 7320 ) Apparatus Must Be Complete For Determination Of Slum Of Fresh Concrete For Measuring Its Consistency For Aggregate Size Les Then 38 Mm, Apparatus Must Include Standard Size Slump Cone, Base Plate And Testng Rod. ( Equipment / Supply Must Be Of Superior Make / Manufacture And Finish, Completein All Respects ) , Bitumen Binder Centrifuge Extractor ( As Per Relevant Is Specifications / Astm D-2172 ) Manually Operated Bitumen Binder Certrifuge Extractor For Bituminous Mix Up To 1.5Kg Capacity, With Hand Speed Control, With Filter Paper Discs ( Set Of 500 Sheets ) .Equipment Must Be Of Good Make / Manufacture And Finish ( Completeand Operational In All Respects ) , Softeningpoint Apparatus ( Ring And Ball Method ) The Test Appartus Must Be As Per Is : 1205 / Astmd 36 Relevant Specifications, For Determination Of Softeningtemperature Of Bitumen Using Ring And Ball Method. Equipment Must Have Built In Heating Facility, Magnetic Stirrer And Temperature Controller. Appratus Must Be Operational For 220 V, 50 Hz, Single Phase Ac Supply. Equipmentmust Be Of Superior Make / Manufacture And Finish ( Completein All Respects ) , Ductility Apparatus ( Electrically Operated With Cooling Arrangement ) :- The Test Apparatus Must Be As Per Is : 1208 / Astmd 113 Relevant Specifications, For Determination Of Ductility Of Bitumen Using Control Elongation ( Constant Speed ) By Way Of Ductility Machine. Equipment Must Have Built In Water Bath With Heating Facility Using Electric Pump Circulator And Heater. Equipment Must Be Supplied With Ductility Moulds And Base Plates For Testing Three Samples Simultaneously. Apparatus Must Be Operational For 220 V , 50 Hz, Single Phase Ac Supply.Equipment Must Be Of Superior Make / Manufacture And Finish, ( Completein All Respects ) , Cleveland Flash ( Open ) & Fire Point Apparatus As Per Specification Of ( Is : 1448, P : 69, Is : 73-2013 ) Equipment Must Be Capable For Determining Flash And Fire Point Of Bitumen.The Flash Cup Must Be Made Of Brass Withinsulated Handle.Equipment Must Have A Metal Heatingplate Electrically Operated With Energy Regulator And Gas - Jet Assembly ( Completein All Respects With All Optional Accessories ) , Pavement Depth / Thickness Gauge : Ms Thickness Gauge With Minimum Gauging Deth Of 150 Mm ( Completeand Operational In All Respects ) , Analog Electrically Operated Ctm 1000 Kn Compression Testing Machine Conform To Is : 14858 With +- 1% Accuracy. Loading Range : 1000 Kn ( 100 T ) , With L.C 5Kn Maximum Clearance Between Platens: 390 Mm Maximum Clearance Between Side Platens : 260 Mm Platen Size : 222 Mm Dia., Platen Hardness : 612 Hv ( 55 Hrc ) , Piston Dia : 157 Mm, Pistonstroke : 50 Mm, Motor Hp: 1, Motor Make : Godrej Or Crompton Greaves, Power Requirement : 220 V / 230 V , I Phase, 50 Hz, Ac Supply, Specimen Size: 100 Mm, 150 Mm Cube, 100 Mm And 150 Mm Dia Cylinder, Standard Is : 516 And Is : 14858 Pumping Unit To Be Electrical Operated Unique Features Are :- A ) Calibration Within 1%Of Full Scale Deflection With Traceability To Nabl. B ) Powder Coating Finished Surface. C ) Front Gate For Protection. D ) Pump With Brass Casing. The Complete Unit Comprises Of A ) Loading Unit: Is Of Fully Weldedconstruction Having A Cross -Head With A Spherical Seated Platen.The Lower Platen Is Attached To The Top Of The Piston.Cubes Up To 300 Mm And Cylinders Upto 300 Mm Dia X 300 Mm Height Can Be Tested Using The Appropriate Models. B ) Continuous Voltage Transformer ( Cvt ) Note :- With Nabl Calibration. Equipment Must Be Of Superior Make / Manufacture And Finish ( Completein All Respects ) , Cement Mortar Cube Moulds ) Cube Mould Of 70.6 Mm Size Conforming To Is : 10086-1982 Supply Must Be Of Superior Make / Manufacture And Finish, ( Completein All Respects ) , Compaction Factor Apparatus ( As Per Is 5515 ) The Apparatus Shall Consists Of Two Conicalhoppers Mounted Above A Cylindrical Receiver.The Hoopers Shall Be Of Rigid Construction , True To Shape And Finished Smooth Inside.They Shall Be Made Of Cast Brass Conforming To Is : 292-1961* Or Cast Iron Of Grade 20 Conforming To Is : 210-1970. Brass Sheet At Least 3 Mm Thick. Receiver- The Cylindrical Receiver Shall Be Of Rigid Construction True To Shape And Finished Smooth Inside.It Shall Be Made Of Cast Brass Or Cast Iron.The Top Edge Shall Beaccurately Machined Normal To The Cylinder Axis. Frame :- The Frame Shall Be Of Rigid Construction.Welded Or Riveted Rolled Structural Sections Would Be Suitable. Accessories :- The Apparatus Shall Also Include Twoordinary Trowels Having A Steel Blade Of 200 Mm In Lengthwith Straight Edge, A Hand Scoop About 150 Mm Long, A 16 Mm Diameter And 600 Mm Long Steel Tamping Bar With A Rounded Working End And Scales ( Ora Balance ) To Weigh Up To 25 Kg To The Nearest 10 G. Equipment Must Be Of Superior Make / Manufacture And Finish ( Completein All Respects ) , Laboratory Electric Hot Plates : Equipment Must Comprise Of Following Minimum Specifications : 1 ) Ss / Ms Top With Size Of 450 Mm X 600 Mm X 150 Mm ( With Dimension Allowance Of + 10 Mm ) 2 ) Thermostat Control And Regulator. 3 ) Energy Consumption Upto 2.0 Kw Operatioal At 220 V + 10 V, Single Phase , 50 Hz Ac. ( Equipment / Supply Must Be Of Superior Make / Manufacture And Finish, Completein All Respects ) , Automatic Controlled Single Phase Stablizer ( 10 Kva ) As Per Is Specificationsis 9815 Equipment Must Be An Indoor Floor Mounted Single Phase Automatic ( Copper Wound ) I / P Range 90V To 300V Single Phase, O / P Of 230 +- 4% Frequency 50-60 Hz, Air Cooled Construction With U / V, O / V, O / L Protection System. Equipement Must Have Working Temperature Range -5 Degree Centigrade To 50 Degree Centigrade, 95% Rh With Proper Insulation Resistance, Including Necessary Supply Of Quality Oil. ( Equipment / Supply Must Be Of Superior Make / Manufacture And Finish, Completein All Respects ) , Miscellaneous Items / Glassware / Consumable Items / Safety Equipment , Superior Quality Borosilicate Bottles Of 50 Ml Capacity With Capillary Bored Glass Stopper For Determination Of Specific Gravity Of Soil / Bitumen / Powders Etc. , Heat Resistance Safety Glove Of Superior Quality , Natural High Grade Pigmented Heavy Duty Latex Handgloves Of Medium Size , Laboratory Appron Of Superior Make , Medium Size Ss Scops / Trowels , Superior Quality And Make Heavy Duty Led Flash Light With Chargeable Battery , Superior Quality Masks , Knife / Spatula , Trichloroethylene , Glass Beaker 1 Litre Capacity , General Tool Box , Traffic Diversion Cones ( Delineators )
