Furniture Furniture Panchayat Samiti Kalyanpur , Furniture Items : , Table With Padestal & Side Unit Main Desk Size: 2400 Width Mm*1200 Depth Mm* 750 Hight Mm. Top Panel 400 Mm Thick (18 Mm Mdf + 18 Mm Mdf + 4 Mm Natural Veneer) Veneered Potion Of Work Su, kalyanpur-Rajasthan

Furniture Furniture Panchayat Samiti Kalyanpur , Furniture Items : , Table With Padestal & Side Unit Main Desk Size: 2400 Width Mm*1200 Depth Mm* 750 Hight Mm. Top Panel 400 Mm Thick (18 Mm Mdf + 18 Mm Mdf + 4 Mm Natural Veneer) Veneered Potion Of Work Surface Is Finished With High Gloss Polyster Polyurethance Coating. The Side Panel & Modesty Are Made Up Of 18Mm Thick Pre Laminated Mdf Board Edge Sealed With 2Mm Thick Pvc Beading. Side Unit Asize: 1200(W)*450(D)*750(H) Mm. The Hinge Door Side Unit Top Panel 40Mm Thick(18 Mm Mdf + 18 Mm Mdf + 4 Mm Natural Veneer) Veneered Potion Of Work Surface Is Finished With High Gloss Polyster Polyurethance Coating. Side Unit, Side Pannel, Back An Shelvesare Made Up Of 18 Mm Thick Pre Laminated Mdf Board Edge Sealed With 2Mm Thick Pvc Beading. The Side Unit Door Are Of (18 Mm Mdf + 4 Mm Natural Veneer) Veneered Potion Of Work Surface Is Finished With High Gloss Polyster Polyurethance Coating. The Three Drawer Unit Is Made Up Of 18Mm Thik Pre-Laminated Mdf Board Edge Sealed With 2Mm Thick Pvc Beading. The Front Of Drawer Are Of(18 Mm Mdf + 4 Mm Natural Veneer) Veneered Potion Of Work Surface Is Finished With High Gloss Polyster Polyurethance Coating By Machine. , Conference Table 40 Seating: Size: 675(W)*600(D) Per Seating And 750(H) Mm. With Wire Manager. The Top Shall Be 36 Mm Thick Shall Be Made From 36 Mm Plain Mdf Having A Straight Profile With Half Round Edges And With 0.6 Mm Thick Post Forming Laminate In Under Structure The Legs Shall Be Made From 25Mm Plain Mdf Having A Straight Profile With Half Round Edges And With 0.6 Mm Thick Post Forming Laminate. Overall Thickness Of Leg Shall Be 26.2 Mm. The Modesty Panel In Under Structure Shall Be Made From Pre-Laminated Mdf Boards Of 18 Mm Thick With 2 Mm Thick Pvcedge Beading On All Sides. All The Pvc Edge Beading Should Have Press Through 200° Temperature Hot Melt Glue By Automatic Through Feed Edge Banding Machine With Corner Rounding Function. There Shall Be Wire Management Wire Carrier Shall Be Made From 0.6 Mm Thick Crca Powder Coated And Carrier Cover Shall Be Made Of 12 Mm Thick Mdf Painted All Over. Al The Metal Parts Have Free From The Dent, Burrs And Sharp Edges, Rust, Scale And Any Other Foreign Element Before Powder Coating. The Minumum Thickness Of Powder Coated Should Be 40-50 Microns. , Visitor Chair: Seat/Back Assembly: The Seat And Back Are Made Up Of 1.2 Cm Thick Hot Pressed Plywood, Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. Mid Back Chair Back Size 48.0Cm. (W) X 47.0Cm. (H) Seat Size: 45.0Cm. (W) X 48.0Cm. (D) Polyurethane Foam: The Polyurethane Foam Is Moulded With Density = 45 +/-2 Kg/M3 And Hardness = 20 +/- 2 On Hampden Machine At 25% Compression. Armrests: The One-Piece Armrests Made Of Black Integral Skin Polyurethane With 50-70 Shore ‘A’ Hardness And Reinforced With M.S. Insert. The Armrests Are Scratch And Weather Resistant. The Armrests Are Fitted To The Seat With Seat/Armrest Connecting Strip Assembly Made Of 0.6Cm Thick. Hr Steel. The Entire Ms Sheet Cutting Should Have Through Nc Sheet Metal Cutting Machine And The Entire Sheet Metal Banding Should Have Through Cnc Sheet Metal Bending Machine. Tubular Frame: The Tubular Frame Is Cantilever Type & Made Of Dia. 2.54Cm (1”) X 14 Bg M.S. E.R.W. Tube. The Bending Of Frame Should Have Through Cnc Pipe Bending Machine. Overall Dimensions Of Chair Shall Be Seat Height -45.0Cm. Height -81.5Cm, Width & Depth Of Chair As Measured From Pedestal – Width-55.0 Cm And Depth-63.0 Cm .All The Metal Parts Have Free From The Dent, Burrs And Sharp Edges, Is Have Pickled Before Stove Enamellings To Remove Grease, Rust, Scale And Any Other Foreign Element Through Treated By Phosphating Process Before Powder Coating. The Metal Parts Material Is Then Oven Baked With A Controlled Temperature Of 180 Deg. C To 200 Deg. Minimum Thickness Of Powder Coated Should Be 40-50 Microns. , Multipurpose Chair – Providing And Fixing Of Chairs: Seat/Back Assembly Made Up Of 1.2 ±O.1Cm. Thick Hot-Pressed Plywood And Upholstered With-Fabric Upholstery Covers And Moulded Polyurethane Foam. Back Size Shall Be 42.0Cm. (W) X 27.0 Cm. (H)And Seat Size 42.0 Cm. (W) X 42.0 Cm. (D) With High Resilience (Hr) Polyurethane Foam To Be Moulded With Density =45±2 Kg/M3 And Hardness Load 16 ± 2 Kg For 25% Compression. The Chairs Shall Have Tubular Frame Which Is Cantilever Type & Made Of 02.54 ±0.03Cm. X 0.16 ±0.016Cm.Thk. M.S. Er.W. Tube. The Seat Is Fitted To The Main Frame With Seat/Main Frame Connecting Strip Assembly Made Of 0.6Cm Thick. Hr Steel. Overall Dimensions Of Chair Shall Be 51Cm W X 60Cm D X 82Cm H. All Metal Part Shall Be Powder Coated. , Sofa 3+1+1: Size Of 1 Seater Sofa Shall Be 1010 (L) 920 Mm (W) 950 (H) Seating Area Length 560 Mm & Seating Area Width 510Mm. Size Of 3 Seater Sofa Shall Be 1960 (L) 920 Mm (W) 950 (H) Seating Area Length 1520 Mm & Seating Area Width 510Mm. The Frame Material To Be Tropical Wood + Pinewood, Length Of S-Spring To Be 510 Mm, Width Of Belt To Be 40Mm.There Should Be Pocket On Each Side Of Sofa. The Seat Foam & Back Foam Density To Be 40Kg/M3 Upholstered With Leatherette. The Material For Leg And Handleto Be Wood And Should Be Polished.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	23-02-2022	technical bid condition add	Technical Bid	28-02-2022

INR 500 /-

INR 18000.0 /-

INR 9 Lakhs /-