Provided Gym Equipment Provided Gym Equipment , 7 Station Multy Gym Unit Chest Press Cum Shoulder Press - 75 Kg Latpull Down-75 Kg Single Hand Pulley-50 Kgincline Leg Press-90 Kg Leg Raiser With Dipping Abdomen Board Twister , 6 Station Multy Gym Unit Chest Press Cum Shoulder Press - 75 Kg Latpull Down-75 Kg Single Hand Pulley - 50 Kg Leg Curl & Leg Extension - 70 Kg Leg Raiser With Dipping Abdomen Board , 5 Station Multy Gym Unit Chest Press Cum Shoulder Press - 75 Kg Latpull Down-75 Kg Leg Curl & Leg Extension - 70 Kg Leg Raiser With Dipping Twister , Wrist Conditioner , Preacher Curl Machine , Lat Pull Down , Rowing Pulley , Chest Press , Multi Functional Trainer , Pec Fly With Rear Delt , Shoulder Press , Standing Calf Machine , Incline Leg Press , Leg Extension And Leg Curl Combo , Hack Machine , Multi Hip , Abdomen Crunch , Assisted Chin-Up , Hyper Extension , Bent Over Rower (T Bar] , Bench Press Bench , Incline Bench , Decline Bench , Adjustable Bench , Dual Axis Incline Press , Dual Axis Bench Press , Dual Axis Decline Press , 45 Degree Leg Press , Abdomen Bench , Vertical Knee Raiser , Twister , 3-Dimensional Smith Machine , Pushup Stand , Plain Bench , Smith Bench , Rack For 20 Dumbells With Bar Rack , Arc Dumbell Rack , Weight Plate Tree Rack , Abdomen Board With Ladder , Double Twister , Seated Calf Bench , Shoulder Press (Free Weight): Dimensions: (L X W X H) 1300X1260x1350mm. Main Frame: ?114X3 Mm Thick M.S Pipe And Subordinate Tube Is Of ?88X3.0 Large Thickness M.S Pipe. Handle: Is Made Of ?88 X3 Mm Thick Pipe And ?25 Mm Round M.S Bright Bar In Bending Design. All Remaining Frame Is Made By ?88X3mm Thick Ms Pipe. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade6305 2Rssteel Ball Bearing. Base Plate: Is Od166, Id 116, And 6 Mm Thick. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes: ?75Mm Od Seamless Pipe. Weight Plate Mounting Pipe Is Of 048 Mm Ms Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Seat Frame: Made Up Of Hard Chrome Plated Mild Steel 048 Dia Round Pipe. Hardware:All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips: Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: Are Of Pp/Nylon/Hdpe Material. Laser Cutting: Profiles Of 6Mm And 4Mm Thick M.S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Handles For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mmthick Mild Steel Plate. , Front Pull Down (Free Weight): Dimensions: (L X W X H) 1230X1120x1860mm. Main Frame: ?114 X3 Mm Thick M.S Pipe And Subordinate Tube Is Of ?88X3.0 Large Thickness M.S Pipe. Handle Frame Shall Be Made Using Bending Design. Handle: Is Made Of ?88X3 Mm Thick Pipe And ?25 Mm Round M.S Bright Bar In Bending. All Remaining Frame Is Made By 088 X3mm Thick Ms Pipe. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 63052Rs‘Steel Ball Bearing. Base Plate Base Plate Is Od 166, Id 116, And 6 Mm Thick. Pins: Made Up Of M.S Bright Bar. Bearing Bushes:- ?75Mm Od Seamless Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Foam Roller; Foam Roller Made Up Of High Density Composed Foam And Covered With Stitched Heavy Vinyl Cover, And Their Ends Are Covered With Aluminum Or Mild Steel Chrome Plated Caps And M8 Allen Bolt. Hardware: All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips: Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: All Open Ends Should Close Using Closing Caps Of Pp/Nylon/Hdpe Material. Laser Cutting: Laser Cutting Profiles Of 6Mm And 4Mm Thick M. S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Handles For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. , Seated Dip (Free Weight): Dimensions: (L X W X H) 1750X1010x890mm. Main Frame :?114 X3mm Thick M.S Pipe Made In Bending Design And Subordinate Tube Is Of ?88X3mm Thickness M.S Pipe. Handle And Plate Holder Frame, Bottom Frame And Front Are Made In Bending Design By Using ?88X3mm Thickness M.S Pipe. Handle: Is Made Of ?88 X3 Mm Thick Pipe And ?25 Mm Round M.S Bright Bar In Bending Design. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 2Rs Steel Ball Bearing. Base Plates Od 166, Id 116, And 6 Mm Thick And Od 130,1077, 6Mm Thick M.S Round Laser Cut Profile. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes: ?75Mm Od Seamless Pipe. Weight Plate Mounting Pipe Is Of ?48 Mm Ms Pipe. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Foam Roller; Foam Roller Made Up Of High Density Composed Foam And Covered With Stitched Heavy Vinyl Cover, And Their Ends Are Covered With Aluminum Or Mild Steel Chrome Plated Caps And M8 Allen Bolt. Hardware All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips :Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: Aii Open Ends Should Close Using Closing Caps Of Pp/Nylon/Hdpe Material. Laser Cutting: Profiles Of 6Mm And 4Mm Thick .M.S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Handles For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. , Preacher Curl (Free Weight): Dimensions: (Lx W X H) 1210X1360x14b0mm. Main Frame:?88 X3 Mm Thick M.S Pipe And Subordinate Tube Is Of ?88X3mm Large Thickness M.S Pipe In Bending Design. Handle: Handle Is Made Of ?88 X3 Mm Thick M.S Pipe Duly Bending Design And ?25 Mm Round M.S Bright Bar. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Qd-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 2Rs Steel Bail Bearing. Base Plate: Base Plate Is Od130, Id 90, And 6 Mm Thick. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes: ?75Mm Od Seamless Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Hardware : All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Cables; 6Mm Thick Nylon Coated Cables With Aluminum Crimping At One End To Attach And Hold Handle. One Additional Cable Set To Be Supplied. Hand Grips: Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps : All Open Ends Should Dose Using Closing Caps Of Pp/Nylon/Hdpe Material. Laser Cutting: Profiles Of 8Mm, 6Mm And 4Mm Thick M. S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Handles For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate , Row (Free Weight): Dimensions: (L X W X H) 1375X1570x1530mm. Main Frame: ?114 X3 Mm Thick M.S Pipe And Subordinate Tube Is Of ?88X3mm Large Thickness M.S Pipe. Handle Main And Base Frame, Bottom Frame Are Made In Bending Design Using Of ?88X3mm Thick M.S Pipe. Handle: Is Made Of ?88 X3 Mm Thick Pipe Bending Design And ?25 Mm Round M.S Bright Bar. All Remaining Frame Is Made By ? 88 X3mm Thick Ms Pipe. Weight Plates: Rubberized = Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 ^Rs Steel Ball Bearing. Base Plate :Is 00166,10 116, And 6 Mm Thick. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes : ? 75Mm Od Seamless Pipe. Weight Plate Mounting Pipe Is Of 048 Mm Ms Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Hardware : All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips :Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long,Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps-.All Open Ends Should Close Using Closing Caps Of Pp/Nylon/Hdpe Material. Laser Cutting: Profiles Of 6Mm And 4Mm Thick .M.S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Handles For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. , Calf Raise (Free Weight): Dimensions: (T X W X H) 1470X735x92smm. Main Frame: ?114X3 Mm Thick M.S Pipe And Subordinate Tube Is Of ?88X3mm Large Thickness M.S Pipe. Bottom Frame, Seat Frame, Thighs Locking Frame Are Made In Bending Design ?88X3mmm.S. Pipe All Remaining Frame Is Made By ?88 X3mm Thickness M.S Pipe. Foot Rest: Foot Rest Is Made Using Heavy Duty 100 X 50 X 2.5Mm Thick Capsule Tube. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder, Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 ‘2Rs1 Steel Ball Bearing. Base Plate : Is Od 166, Id 116, And 6 Mm Thick. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes : ? 75Mm Od Seamless Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Hardware All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips :Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: All Open Ends Should Close Using Closing Caps Of Pp/Nyion/Hdpe Material. Laser Cutting: Profiles Of 8 Mm 6Mm And 4Mm Thick .M.S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Handles For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seat Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. , Kneeling Leg Curl (Free Weight): Dimensions: (L X W X H) 1270X1430x1330mm. Main Frame:?114X3 Mm Thick M.S Pipe In Bending Design And Subordinate Tube Is Of ?88X3 Mm Large Thickness M.S Pipe. Plate Holder Frame, Front Abdomen Rest Frame, Knee Rest Frame And Leg Movement Frame Made In Bending Design Using 088X3mm M.S Pipe Handle: ?25 Mm Round M.S Bright Bar. Leg Movement Frame Made Of ?88 X3mm Thick Ms Pipe. All Remaining Frame Is Made By ?88 X3mm Thick Ms Pipe. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 2Rs Steel Ball Bearing Bearing: Lubricated High Grade Zz Steel Ball Bearing. Base Plate :Is Od 166, Id 116, And 6 Mm Thick. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes : ? 75Mm Od Seamless Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Foam Roller; Foam Roller Made Up Of High Density Composed Foam And Covered With Stitched Heavy Vinyl Cover, And Their Ends Are Covered With Aluminum Or Mild Steel Chrome Plated Caps And M8 Allen Bolt. Hardware :All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips :Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum /Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: All Open Ends Should Close Using Closing Caps Of Pp/Nylon/Hdpe Material. Laser Cutting Profiles Of 8 Mm 6Mm And 4Mm Thick .M.S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Paddle Movement For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. , Leg Extension (Free Weight): Dimensions: (L X W X H) 1490X1500x1090mm. Main Frame:?114 X3 Mm Thick M.S Pipe In Bending Design And Subordinate Tube Is Of ?88X3mm Large Thickness M.S Pipe.00 Leg Movement Frame: Is Made Of ?88 *3 Mm And ?48 X3mm Thick Pipe Thick Pipe In Bending Design And ?25 Mm Round M.S Bright Bar. All Remaining Frame Is Made By 076 X3mm Thick Ms Pipe. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel 048 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id*48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 2Rs Steel Ball Bearing Base Plate :Is Od 166, Id 116, And 6 Mm Thick. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes : ? 75Mm Od Seamless Pipe. Weight Plate Mounting Pipe Is Of ?48 Mm Ms Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Foam Roller; Foam Roller Made Up Of High Density Composed Foam And Covered With Stitched Heavy Vinyl Cover, And Their Ends Are Covered With Aluminum Or Mild Steel Chrome Plated Caps And M8 Allen Bolt. Hardware: All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: All Open Ends Should Close Using Closing Caps Of Pp/Nylon/Hdpe Material. Laser Cutting: Profiles Of 8 Mm 6Mm And 4Mm Thick M.S Sheet Are Used For Connectingsubordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Paddle Movement For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. , 45 Degree Leg Press (Free Weight): Dimensions: (L X W X H) 2480X1240x1450mm. Main Frame:?114 X3 Mm Thick M.S Pipe And Subordinate Tube Is Of ?88X3mm Large Thickness M.S Pipe. Trolley Movement Main Frame Made In Bending Using ?114 X3 Mm Thick M.S Pipe And Bottom Frame In Bending Design Made By ?88X3mm Thickness M.S Pipe. Trolley: Trolley Made 80X40x2.5Mm Thick Capsule Tube. Trolley Guide Bar Made Up Of M.S 25 Od Solid Bright Bar Duly Hard Chrome Plated. Trolley Footrest Made Up Of 5Mm Thick Checkered Plate Duly Powder Coated Finally Covered 5Mm Thick Heavy-Duty Rubber Sheet. Trolley Holder And Safety Rod Is Made Up Of 25Mm Od Solid M.S Bright Bar. Back Rest Frame Should Be Height Adjustable Using Spring Knob Mechanism. Handle: Made Up Of 25Mm Od M.S Bright Bar In Bending Design. All Remaining Frame Is Made By ?88 X3mm Thick. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High-Grade Linear Steel Ball Bearing 25 Id (Inner Diameter). Base Plate: Is Od 166, Id 116, And 6 Mm Thick. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes :65X65mm Mild Steel Square Bar. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Hardware: All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips :Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: All Open Ends Should Close Using Closing Caps Of Pp/Nylon/Hdpe Material, Laser Cutting-.Profiles Of 8 Mm 6Mm And 4Mm Thick M.S Sheet Are Used For Connecting Subordinates With Each Other; Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. , Decline Chest Press (Free Weight): Dimensions: (L X W X H) 1240X1400x1930mm, Main Frame: ?114 X3 Mm Thick M.S Pipe And Subordinate Tube Is Of ?88X3mm Large Thickness M.S Pipe. Top, Bottom, Back Rest And Handle Frame Should Be In Bending Design Is Made Of ?88 X 3 Mm Thick Pipe And Handle025 Mm Round M.S Bright Bar In Bending Design. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 2Rs1 Steel Ball Bearing Base Plate: Is Od 166, Id 116, And 6 Mm Thick. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes: ? 75Mm Od Seamless Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Hardware :All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips :Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: Aii Open Ends Should Close Using Closing Caps Of Pp/Nylon/Hdpe Material. Laser Cutting; Profiles Of 8 Mm 6Mm And 4Mm Thick M.S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine:Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. , Abdominal Machine (Free Weight): Dimensions: (L X W X H) 1210X132sx1640mm. Main Frame:?88 X3 Mm Thick M.S Pipe In Bending Design And Subordinate Tube Is Of ?60X3mm Thickness M.S Pipe. Back Rest Frame Made Up Of ?88 X3 Mm Thick M.S Pipe In Bending Design. Seat Frame Should Have 180 Degree Rotational. Handle: Is Made Of ?25 Mm Round M.S Bright Bar. All Remaining Frame Is Made By ? 88 X3mm Thick And ?60 X3mm Thick Ms Pipe. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 Irs Steel Ball Bearing Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes: ? 75Mm Od Seamless Pipe. Weight Plate Mounting Pipe Is Of 048 Mm Ms Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 6 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Foam Roller; Foam Roller Made Up Of High Density Composed Foam And Covered With Stitched Heavy Vinyl Cover, And Their Ends Are Covered With Aluminum Or Mild Steel Chrome Plated Caps And M8 Allen Bolt. Hardware : All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips: Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: All Open Ends Should Close Using Closing Caps Of Pp/Nylon/Hdpe Material. Laser Cutting: Profiles Of 8 Mm 6Mm And 4Mm Thick M.S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Handle For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. , E-Z Bar 28 Mm Dia With Collors (Chrome Plated) , E-Z Bar 50 Mm Dia With Collors (Chrome Plated) , Barbell Bars 28 Mm Dia With Collors (Chrome Plated) , Barbell Bars 50 Mm Dia With Collors (Chrome Plated) , M.S Hard Chrome Plated Weight Plates. , Rubberized Weight Plate , M.S Hard Chrome Plated Dumbbells , Rubberized Dumbbells , Gym Mat (Gymnasium Mat) , Mirror For Gymnasiums , Trademill - Commercial , Trademill-Semi Commercial , Ellipticals-Commercial , Upright Bikes - Commercial , Recumbent Bike - Commercial , Spine Bike - Commercial , Exer Cycle , Air Walker Providing And Fixing Air Walker Made From G.L. Pipe. Dimensions: (L X W X H)= 1190X380x1244mm 1. Main Frame- ?88Mm Od B Class Gl Pipe Dually Bending Design. 2. Foundation Plate -M.S. Round Plate Of 0 250Mm & 8Mm Thick. 3. Paddle-?42Mm Od Round Gl Pipe. 4. Handle-?33Mm Od B Class Gi Pipe. 5. Footrest- Cast Iron 124X296x5mm Thick And M.S. Plate Of 2Mm Thick Use To Support It. 6. Top Closing Cap - Dome Shape Made By Pp/Nylon/Hdpe Material. 7.Closing Cap’S-Pp/Nylon/Hdpe Material. 8. Bracket- 8Mm Thick Laser Profile Is Use To Support Paddle Frame. 9. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of ? 250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In Cc. Stock Below Ground Level. Bearing- Use Is 6005 Permanent Lubricated Reputed Brands. Pins - ? 25Mm M.S. Bright Bar Pin. Circlips- A 24 Circlips Are Used For Assembly. Bearing Bushes -?60Mm Od Seamless Pipe. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product , Chest Press Double Providing And Fixing Chest Press Double Made From G.L. Pipe. Dimensions: (L X W X H)= 1955X710x1900mm. 1. Main Center Pipe- - ?114 Mm Od B Class Gl Pipe. 2. Foundation Plate -M.S. Round Plate Of 0 250Mm & 8 Mm Thick. 3. Foundations Cover Cap- Dome Shape Of Pp/Nylon/Hdpe Material. 4. Remaining Frame- Made Up Of ?48Mmod B Class G.L. Pipe. 5. Handle - Made Up Of ?48Mm Od B Class G.L. Pipe. 6. Link - Made Up Of 048Mmod B Class G.L. Pipe. 7. Seat & Back Rest - 360 X 300X 2Mm Thick M.S. Seat With Corner Fillet For Safety. 8. Bearing Bush Closing Caps- Pp/Nylon/Hdpe Material. 9. Handle Is Connected With Frame By 8 Mm Laser Cutting Ms Profile 10. Top Closing Cap - Dome Shape Made By Pp/Nylon/Hdpe Material. 11. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of ? 250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing - Use Is 6005 Permanent Lubricated Reputed Brand. Bearing Bushes - ? 60Mm Od Seamless Pipe. Pin - Made Of ? 25Mm M.S. Bright Bar. Grips - High Quality Rubber ? 46Mm Od. Circlips - A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 60 To 70 Micron Safety Instructions And Exercise Chart - Start &Finish Position Stick On Product , Triple Twister Providing And Fixing Triple Twister (Standing Position-2 And Seating Position-L) Made From G.L. Pipe. Dimensions: (L X W X H) 1500X1500x1420mm. 1. Main Frame- ?114 Mm Od B Class Gl Pipe. 2. Foundation Plate -M.S. Round Plate Of ? 250Mm 8T 8 Mm Thick. 3. Seat Plate Support - ?60 Mm Od B Class G.L Pipe. 4. Seating Ring - ?33 Mm Od B Class G.L Pipe Made By Rolling. 5. Seating Ring Support - ?33 Mm Od B Class G.L Pipe. 6. Remaining Frame - Is Made By 100X50x2.5Mm Rectangular Pipe. 7. Standing Plate- ?300Mm Od X 10Mm Thick M.S. Plate. 8. Seating Plate- ?300Mm Od X 10Mm Thick M.S. Plate. 9. Seating Seat Position And Other Two Standing Position Plates Are Fixed 120 Degrees Each From Other. 10. Handle- ?33Mm B Class G.I. Pipe Made By Rolling. 11. Top Closing Cap - Dome Shape Made By Pp/Nylon/Hdpe Material. 12. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of Ms. Round Plate Of ? 250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing - Used Is 6005 Permanent Lubricated Reputed Brand. Bearing Bushes - ? 60Mm Od Seamless Pipe. Pin-Made Up Of ? 25Mm M.S. Bright Bar. Circlips- A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. , Horse Rider Providing And Fixing Horse Rider Made From G.I. Pipe. Dimensions: (L X W X H)= 1140X400x1400mm. 1. Main Frame - ?114 Mm Od B Class Gl Pipe. 2. Foundation Plate - M.S. Round Plate Of ? 250Mm & 8Mm Thick. 3. Foundation Cover Cap - Dome Shape Of Pp/Nylon/Hdpe Material. 4. Remaining Frame - Is Made By ? 48 Mm Od B Class Gl Pipe. 5. Seat Frame - Is Made By ?48 Mm Od B Class Gl Pipe. 6. Seat Position Must Be Horizontal To 110-120 Degree. 7. Link - Made Up Of ?48Mm Od B Class G.I. Pipe. Angle Between Is Link And Ground Position Is 10-20 Degree. 8. Handle -? 33 Mm Od B Class Gl Pipe. 9. Paddle Vertical Support-? 60 Mm Od B Class Gl Pipe. 10. Handle Frame- ? 42Mm Od B Class Gl Pipe Dually Bending Design. 11. Foot Pipe - ? 33 Mm Od B Class Gl Pipe. 12. Support Frame -10 Mm Thick Ms Flat Is Used. 13. Seat - 5Mm Thick Ms Laser Cutting Profile Is Used. 14. Bearing Bush Closing Cap - Pp/Nylon/Hdpe Material. 15. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of ? 250 Mm & 8Mm Thickness Is Welded At Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing - Use Is 6005 Permanent Lubricated Reputed Brand. Bearing Bushes - ? 60Mm Od Seamless Pipe. Pin - Made Of ? 25Mm M.S. Bright Bar. Grips - High Quality Rubber ? 46Mm Od. Circlips - A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 60 To 70 Micron Safety Instructions And Exercise Chart - Start &Finish Position Stick On Product. , Leg Press Double Providing And Fixing Leg Press Double Made From G.I. Pipe. Dimensions: (L X W X H)= 1676X400x1500mm. 1. Main Frame-?114 Mm Od B Class Gl Pipe. 2. Foundation Plate - M.S. Round Plate Of ? 250Mm & 8Mm Thick. 3. Foundations Cover Cap - Dome Shape Of Pp/Nylon/Hdpe Material. 4. Link - Is ? 60Mm Od B Class Gl Pipe. 5. Seat Frame - ? 42Mm Od B Class Gl Pipe. 6. Leg Press Back Rest Should Be Angled In 120-130 Degree. 7. Foot Rest- Cast Iron 124X296x5mmthick And M.S Plate Of 2Mm Thick Use To Support It. 8. Seat- 360X300x 2Mm Thick M.S. Seat With Corner Fillet For Safety. 9. Link Connected With Frame By 8 Mm Thick Laser Cutting Ms Profile. 10. Top Closing Cap - Dome Shape Made By Pp/Nylon/Hdpe Material. 11. Closing Cap’S- Pp/Nylon/Hdpe Material. 12. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of ?250 Mm & 8Mm Thickness Is Welded At Top.Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe.Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing- Use Is 6005 Permanent Lubricated Reputed Brand. Pin- ?25Mm M.S. Bright Bar Pin. Bearing Bushes?60Mm Od Seamless Pipe. Circlip- A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-100 Micron. , Rower Providing And Fixing Rower Made From G.L. Pipe. Dimensions: (L X W X H)= 1472X915x1040mm. 1. Upper And Bottom Pipes- 088Mm Od B Class Gl Pipe. 2. Foundation Plate-M.S. Round Plate Of ?250Mm & 8Mm Thick. 3. Handle- ?33Mm Od B Class G.L Pipe. 4. Angle Between Handle And Horizontal Surface Is 75-80 Degree. 5. Linkages-?48Mm Od B Class G.L. Pipe. 6.Seat - 360 X 300 X 2Mm Thick M.S. Seat With Corner Fillet For Safety. 7.Foot Resting Pipe- ?60 Od B Class G.L. Pipe. 8. End Closing Cap - Dome Shape Made By Pp/Nylon/Hdpe Material. 9. Closing Caps - Pp/Nylon/Hdpe Material. 10. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of ?250 Mm & 8Mm Thickness Is Welded At Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Pin - ? 25Mm M.S. Bright Bar Pin. Circlips- A 24 Circlips Are Used For Assembly. Bearing Bushes-? 60Mm Od Seamless Pipe/Bar. Bearing- Use Is 6005 Permanent Lubricated Reputed Brands. Grips - High Quality Rubber 46Mm Od. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. , Seated Puller Double Providing And Fixing Seated Puller Double Made From G.L. Pipe. Dimensions: (L X W X H)= 1955X660x1955mm. 1. Main Center Pipe-?114 Mm Od B Class Gl Pipe. 2. Foundation Plate -M.S. Round Plate Of ? 250Mm & 8 Mm Thick. 3. Foundations Cover Cap- Dome Shape Of Pp/Nylon/Hdpe Material. 4. Remaining Frame- Made Up Of ?48Mm Od B Class G.L. Pipe. 5. Handle - Made Up Of ?48 Mm Od B Class G.L. Pipe. 6. Seat - 360 X 300 X 2Mm Thick M.S. Seat With Corner Fillet For Safety. 7. Handle Is Connected With Frame By 8 Mm Laser Cutting Ms Profile. 8. Top Closing Cap - Dome Shape Made By Pp/Nylon/Hdpe Material. 9. Closing Caps - Pp/Nylon/Hdpe Material. 10. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of ?250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing- Use Is 6005 Permanent Lubricated Reputed Brands. Pin- Made Up Of 0 25Mm M.S. Bright Bar Pin. Bearing Bushes - ? 60Mm Od Seamless Pipe. Grips- High Quality Rubber ? 46Mm Od. Cirdips-A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product , Shoulder Builder Double Providing And Fixing Shoulder Builder Double Made From G.L. Pipe. Dimensions: (L X W X H)= 890X558x1500mm. 1. Main Frame- Made From ? 114 Mm Od B Class G.L. Pipe. 2. Foundation Plate -M.S. Round Plate Of ?250 Mm & 8Mm Thick. 3. Foundation Cover Cap - Dome Shape Of Pp/Nylon/Hdpe Material. 4. Shoulder Ring Pipe- ?33 Mm Od B Class G.L Pipe 5. Shoulder Ring Pipe Support - ?25 Mm Od B Class G.I Pipe. 6. Nylon Knob With Bearing - Is Fixed On Shoulder Ring Pipe For Rotating Purpose.2 Set To Be Fixed In A Position For Kids And Adults. 7. Top Closing Caps- Pp/Nylon/Hdpe Material.. 8. Closing Cap- Pp/Nylon/Hdpe Material. 9. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of ? 250 Mm & 8Mm Thickness Is Welded At Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing - Use Is 6005 Permanent Lubricated Reputed Brands. Pin- ?25 Mm M.S. Foundation Plate -M.S. Round Plate Of ? 250 Mm & 8Mm Thick. Bearing Bushes-?60 Mm Od Seamless Pipe. Circlips - A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. , Sit Up Board Providing And Fixing Sit Up Board Made From G.I. Pipe. Dimensions: (L X W X H)= 1570X450x660mm. 1. Main Frame - Made From ?33 Od B Class G.I. Pipe Bending Design. 2. Foundation Plate -M.S. Round Plate Of ? 250Mm & 8 Mm Thick. 3. Leg Support- ? 60Mm Od B Class G.I Pipe. 4. Remaining Frame - ? 60 Mm Od B Classgi Pipe And 100X50 Ms Pipe. 5. Backrest Seat- Made Of M.S Checkered Plate Sheet Of 3 Mm Thickness Size 1100Mm X 310 Mm. 6. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of ?250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product , Sky Walker Providing And Fixing Sky Walker Made From G.I. Pipe. Dimensions:(Lx W X H)= 1720X910x1700mm. 1. Main Frame- Made Of ?8 8Mm Od B Class 61 Pipes Dually Bending Design. 2. Foundation Plate - M.S. Round Plate Of ? 250Mm 8T 8 Mm Thick. 3. Paddle Vertical Support - ?42Mm Od B Class Gl Pipe. 4. Handle- ?33Mm Od “B Class Gl Pipe Dually Bending Design. 5. Leg Movement Frame- 50Mm X50mm X2mm Thick Square Pipe. 6. Footrest - Cast Iron 124X296x5mm Thick And M.S. Plate Of 2Mm Thick Use For To Support It. 7. Top Closing Cap - Dome Shape Made By Pp/Nylon/Hdpe Material. 8. Closing Caps- Pp/Nylon/Hdpe Material. 9. Foundation Stool: Made From Main Pipe ?88 Mm M.S Pipe, And Top Support Of M.S. Round Plate Of ?250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Belowground Level. Grips - High Quality Rubber ? 46Mm Od. Bearing- Use Is 6005 Permanent Lubricated Reputed Brand. Bearing Bushes - ? 60Mm Od Seamless Pipe. Pin -Made Of ? 25Mm M.S. Bright Bar. Circlips - A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. , Surf Board Providing And Fixing Surf Board Made From G.I. Pipe. Dimensions: (L X W X H)= 1090X890x1390mm. 1. Main Frame -Made From Two Pipes Of ?114 Mm Od B Class Gl Pipe. 2. Foundation Plate-M.S. Round Plate Of ? 250Mm & 8Mm Thick. 3. Connecting Pipe - ? 88 Mm Od B Class Gi Pipe Is Used To Connect Both Main Frame Pipes At Top End And ? 42 Mm Pipe Is Used To Connect At Bottom End. 4. Handle- ? 42Mm And ? 33 Od B Class Gl Pipe. 5. Support Pipe - 0 60 Mm Is Use To Support Leg Movement Frame. 6. Leg Movement Frame- ? 42Mm Od B1 Class Gl Pipe 7. Footrest - Cast Iron 325X270x8mm Thick And M.S. Plate Of 250X200x2mm Thick Use For To Support It. 8. Bracket- 8Mm Thick Laser Profile Is Use To Support Leg Movement Frame. 9. Top Closing Cap - Dome Shape Made By Pp/Nylon/Hdpe Material. 10. Closing Caps- Pp/Nylon/Hdpe Material. 11. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S. Pipe And Top Support Of M.S. Round Plate Of ? 250 Mm & 8Mm Thickness Is Welded At Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Grips - High Quality Rubber ? 46Mm Od. Bearing - Use Is 6005 Permanent Lubricated Reputed Brand. Bearing Bushes - ? 60Mm Od Seamless Pipe. Pin - Made Of ? 25Mm M.S. Bright Bar. Circlips - A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start 8T Finish Position Stick On Product. , Exer Cycle Providing And Fixing Exer Cycle Made From G.L. Pipe. Dimensions: (L X W X H)= 1340X710x1190mm. 1. Main Frame-100Mmx50mmx2.5Mm Rectangular Cr Pipe With Bending Design. 2. Foundation Plate -M.S. Round Plate Of ? 250Mm & 8Mm Thick. 3. Handle- 033Mm Od B Class Gl Round Pipe Dully Bending Design. 4. Side And Top Cover -1.6 Mm Thick Ms Laser Cutting Profile Is Used. 5. Seat- 5Mm Thick Ms Laser Cutting Profile Is Used. 6. Paddle-100Mmx50mm Capsule Pipe And 40X16 Mm Ms Flat Is Use For Connecting The Paddle And Shaft. 7. Closing Caps- Pp/Nylon/Hdpe Material. 8. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of ?250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing Bushes - ? 60Mm Od Seamless Pipe. Bearing- Use Is 6005 Permanent Lubricating Sealed Reputed Brand. Shaft -Made Up Of ?25Mm Od Ms Bright Bar. Circlips- A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. , Standing And Seating Twister Providing And Fixing Standing And Seating Twister Made From G.L. Pipe. Dimensions: (L X W X H)= 1820X480x1270mm. 1. Main Frame- ?114 Mm Od B Class Gl Pipe. 2. Foundation Plate -M.S. Round Plate Of ? 250Mm & 8 Mm Thick. 3. Seat Plate Support - ?60 Mm Od B” Class G.L Pipe. 4. Seating Ring - ?33 Mm Od B Class G.L Pipe Made By Roiling. 5. Seating Ring Support - ?33 Mm Od B” Class G.L Pipe. 6. Remaining Frame - Is Made By 100X50x2.5Mm Rectangular Pipe. 7. Standing Plate- ?300Mm Od X 10Mm Thick M.S. Plate. 8. Seating Plate- ?300Mm Od X 10Mm Thick M.S. Plate. 9. Handle- ?33Mm B Class G.L. Pipe Made By Rolling. 10. Top Closing Cap - Dome Shape Made By Pp/Nylon/Hdpe Material. 11. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S.Round Plate Of ? 250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe.. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing - Used Is 6005 Permanent Lubricated Reputed Brand. Bearing Bushes - ? 60Mm Od Seamless Pipe. Pin - Made Up Of ? 25Mm M.S. Bright Bar. Circlips- A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start 8(Finish Position Stick On Product. , Multi -Functional Trainer Providing And Fixing Multi-Functional Trainer Made From G.I. Pipe. Dimensions (L X W X H)= 1390X660x2600mm. 1. Mainframe-?88Mm Od B Class Gl Pipe. 2. Foundation Plate - M.S. Round Plate Of ? 250Mm & 8Mm Thick. 3. Back Support-? 42Mm Od Round Gt Pipe. 4. Leg Riser Support Pipe- 100X50x2.5Mm Thick Rectangle Pipe. 5. Dipping Handle-? 33Mm Od B Class G.I. Pipe. 6. Pushup Handle-?42 Od B Class Gl Pipe. 7. Chin-Up Support - ? 60Mm Od B Class G.I. Pipe. 8. Chin-Up Handle -? 25Mm Od Ms Bar With Knurling. 9. Grips - High Quality Rubber ? 46 Mm Od. 10. Top Closing Cap-Pp/Nylon/Hdpe Material. 11. Flat - 50X10mm Flat Is Used For Connecting Main Frame. 12. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S.Round Plate Of ? 250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start &Finish Position Stick On Product. , Bench With Fixed Weight Providing And Fixing Bench With Fixed Weight Made From G.I. Pipe. Dimensions: (L X W X H)= 1190X1190x1290mm. 1. Mainframe-Made From ? 60 Od B Class Mm G.I. Pipe. 2. Foundation Plate -M.S. Round Plate Of ? 250Mm & 8Mm Thick. 3. Backrest Frame-Made From ? 48 OdB Class Mm G.I. Pipe. 4. Bottom Support Pipe - 50X25x2.5Mm Thick Rectangle Pipe. 5. Fixed Weight- Made Fromss 202 Stainless Steel Tube And 5Kg Casting Round Plate Is Attached At Both End Of Bar. 6. Backrest Seat- Made Of M.S Checkered Plate Sheet Of 3 Mm Thickness Size 1150Mm X 305Mm. 7. Ms Flat 50X10- Is Used For Connecting Main Frame And Backrest Frame. 8. Top Closing Caps- M.S. Cap Is Used. 9. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of ? 250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Locking Chain: Used To Connect Fixed Weight With Main Frame. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart – Start & Finish Position Stick On Product. , Bench With Fixed Dumbbells Providing And Fixing Bench With Fixed Dumbbells Made From G.I. Pipe. Dimensions: (L X W X H)= 1650X960x810mm. 1. Main Frame- Made From ? 48 Od B Class Mm G.I. Pipe. 2. Foundation Plate-M.S. Round Plate Of ? 250Mm & 8Mm Thick. 3. Dumbbell Supporting Frame - Made From ?48 OdB Classmm G.I Pipe. 4. Seating Frame- 50X25x2 Mm Thickness Rectangular Pipe Is Used. 5. Fixed Weight- Made From Ss 202 Stainless Steel Tube And 5Kg Casting Round Plate Weight Is Attached At Both End Of Bar. 6. 8Mm Laser Cut M.S. Profile- Is Use For Connecting The Dumbbell Frame And Main Frame. 7. Footrest- 50X25x2 Mm Thickness Rectangular Pipe Is Used. 8. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of ?250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. , Back Extension Providing And Fixing Back Extension Made From G.L. Pipe. Dimensions: (L X W X H)= 1060X730x990mm. 1. Main Frame* Made From ?88 Od B Class Mm G.L. Pipe. 2. Foundation Plate -M.S. Round Plate Of ? 250Mm & 8Mm Thick. 3. Leg Support - ?42Mm Od B G.L Pipe. 4. Seat Rest Pipe - ?42Mm Od B Classg.L Pipe. 5. Handle Pipe - ?33Mm Od B Classg.L Pipe. 6. Footrest- Cast Iron 124X296x5mm Thick And M.S Plate Of 3Mm Thick Used To Support It. 7. Footrest Pipe - ?42Mm Od 8 Classg.L Pipe And 80X40 Mm Ms Rectangular Pipe. 8. Closing Cap - Pp/Nylon/Hdpe Material. 9. Seat- 360 X 300 X 2Mm Thick M.S. Seat With Corner Fillet For Safety. 10. Grips - High Quality Rubber ? 46 Mm Od. 11. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of ?250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product , Chest Press Single Providing And Fixing Chest Press Single Made From G.L. Pipe. Dimensions: (L X W X H)= 1625X660x1880mm. 1. Main Center Pipe- - ?114 Mm Od B Class Gl Pipe. 2. Foundation Plate -M.S. Round Plate Of ? 250Mm & 8 Mm Thick. 3. Foundations Cover Cap- Dome Shape Of Pp/Nyion/Hdpe Material. 4. Remaining Frame- Made Up Of ?48Mmod B Class G.L. Pipe. 5. Handle - Made Up Of ?48Mm Od B Class G.L. Pipe. 6. Link - Made Up Of ?48Mmod B Class G.L. Pipe. 7. Seat & Back Rest - 360 X 300X 2Mm Thick M.S. Seat With Corner Fillet For Safety. 8. Bearing Bush Closing Caps- Pp/Nylon/Hdpe Material. 9. Handle Is Connected With Frame By 8 Mm Laser Cutting Ms Profile. 10. Top Closing Cap - Dome Shape Made By Pp/Nylon/Hdpe Material. 11. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S.Round Plate Of ? 250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing- Use Is 6005 Permanent Lubricated Reputed Brands. Pin - Made Up Of ? 25Mm M.S. Bright Bar Pin. Bearing Bushes - ? 60Mm Od Seamless Pipe. Grips - High Quality Rubber ? 46Mm Od. Circlips-A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. , Instruction Board Dimensions: (L X W X H)= 990X430x2440mm. Instruction Board Made Up Of B Class G.L. Pipe Of Different Nb. Nominal Bore Size I.E. Internal Diameter Of Pipe In Millimeters. 40Mm Nb: Center Pipe, Foundation Main Frame. The Instruction Board Is Made Up Of Acp (Aluminum Composite Panel) With Thickness Of 3Mm. M.S. Angle 23 X 23 X 1.8Mm Foundation Support Frame. M.S Pipe 40 X 20 X 1.8Mm Foundation Main Frame. Nut And Bolt - High Tensile Steel With Galvanized Nut And Bots Are Used. Powder Coating - Best Quality Of Powder Coating 80-100 Micron. , Double Twister Standing Providing And Fixing Double Twister Standing Made From G.L. Pipe. Dimensions: (L X W X H)= 1820X480x1270mm. 1. Main Frame- ?114 Mm Od B’’ Class Gl Pipe. 2. Foundation Plate -M.S. Round Plate Of 0 250Mm 8T 8 Mm Thick. 3. Seat Plate Support - ?60 Mm Od B Class G.L Pipe. 4. Standing Ring - ?33 Mm Od B Class G.L Pipe Made By Rolling. 5. Standing Ring Support - ?33 Mm Od B Class G.I Pipe. 6. Remaining Frame - Is Made By 100X50x2.5Mm Rectangular Pipe. 7. Standing Plate- ?300Mm Od X 05Mm Thick M.S. Plate. 8. Handle- ?33Mm “B Class G.I. Pipe Made By Rolling. 9. Top Closing Cap - Dome Shape Made By Pp/Nylon/Hdpe Material. 10. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S.Round Plate Of ? 250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe.. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing - Used Is 6005 Permanent Lubricated Reputed Brand. Bearing Bushes - ?50Mm Od Seamless Pipe. Pin - Made Up Of ? 25Mm M.S. Bright Bar. Circlips- A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product , Push Up Bar Providing And Fixing Push Up Bar Made From G.I. Pipe. Dimensions: (L X W X H)= 1220X530x1500mm. 1. Main Frame-? 88 Mm Od B Class Gl Pipe. 2. Leg & Hand Support- ?33 Mm Od 8 Class Gl Pipe. 3. Foundation Plate-M.S. Round Plate Of ? 250Mm & 8 Mm Thick. 4. Top Closing Cap - Dome Shape Made By Pp/Nylon/Hdpe Material. 5. Closing Caps-Plastic Molded. 6. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S.Round Plate Of ? 250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe.. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product , Tai Chi Spinner Providing And Fixing Tai Chi Spinner Made From G.I. Pipe. Dimensions: (L X W X H)= 1200X680x1370mm. 1. Main Frame- Made From ? 114 Mm Od B Class G.I. Pipe. 2. Foundation Plate -M.S. Round Plate Of ? 250 Mm & 8Mm Thick. 3. Foundation Cover Cap - Dome Shape Of Pp/Nylon/Hdpe Material. 4. Thai Chi Ring Pipe- ?33 Mm Od B Class G.I Pipe. 5. Thai Chi Ring Pipe Support - ?25 Mm Od B Class G.I Pipe. 6. Nylon Knob With Bearing - Is Fixed On Shoulder Ring Pipe For Rotating Purpose. 7. Top Closing Caps- Pp/Nylon/Hdpe Material.. 8. Closing Cap- Pp/Nylon/Hdpe Material. 9. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S.Pipe And Top Support Of M.S.Round Plate Of ? 250 Mm & 8Mm Thickness Is Welded At Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing - Use Is 6005 Permanent Lubricated Reputed Brand. Pin-?25 Mm M.S. Foundation Plate -M.S. Round Plate Of ? 250 Mm & 8Mm Thick. Bearing Bushes-?60 Mm Od Seamless Pipe. Circlips - A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product , Three In One Combo Unit Chest Press/Air Walker/Seated Puller. Providing And Fixing Three In One Combo Unit Made From G.I. Pipe. Dimensions: (L X W X H)= 2740X710x2130mm. 1. Main Center Pipe- ?114 Mm Od B Class Gl Pipe, 2. Main Pipe - Air Walker ?88Mm Od B Class Gj Pipe Dually Bending Design. 3. Foundation Plate-M.S. Round Plate Of ?250Mm & 8 Mm Thick. 4. Foundations Cover Cap- Dome Shape Of Pp/Nylon/Hdpe Material. 5.Remaining Frame- Made Up Of ?48Mm Od B Class G.I. Pipe 6. Handle - Made Up Of ?48 And ?33 Mm Od B Class G.L. Pipe. 7. Paddle - ?42Mm Od Round Gl Pipe. 8. Seat - 360 X 300 X 2Mm Thick M.S. Seat With Corner Fillet For Safety. 9. Footrest- Cast Iron 124X296x5mm Thick And M.S. Plate Of 2Mm Thick Use To Support It. 10. Handle Is Connected With Frame By 8 Mm Laser Cutting Ms Profile. 11. Bracket - 8Mm Thick Laser Profile Is Use To Support Paddle Frame. 12. Top Closing Cap - Dome Shape Made By Pp/Nylon/Hdpe Material; 13. Closing Caps - Pp/Nylon/Hdpe Material.. 14. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S.Pipe And Top Support Of M.S.Round Plate Of ? 250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing- Use Is 6005 Permanent Lubricated Reputed Brand. Pin- Made Up Of ? 25Mm M.S. Bright Bar Pin. Bearing Bushes -? 60Mm Od Seamless Pipe. Grips - High Quality Rubber ? 46Mm Od. Circlips-A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. , Four In One Combo Unit Seating Twister/ Standing Twister /Leg Press /Air Walker. Providing And Fixing Four In One Combo Unit Made From G.L. Pipe. Dimensions: (L X W X H)= 2740X1500x2130mm. 1. Main Center Pipe- ?114 Mm Od B Class Gl Pipe. 2.Main Pipe - Air Walker ?88Mm Od B Class Gl Pipe Dually Bending Design. 3.Foundation Plate -M.S. Round Plate Of ? 250Mm & 8 Mm Thick. 4.Foundations Cover Cap- Dome Shape Of Pp/Nylon/Hdpe Material. 5.Remaining Frame- Made Up Of ?48Mm Od B Class G.L. Pipe. 6.Handle - Made Up Of ?48 And ?33 Mm Od B Class G.L. Pipe. 7. Paddle - ?42Mm Od Round G L Pipe. 8. Seat -360 X 300 X 2Mm Thick M.S. Seat With Corner Fillet For Safety. 9. Footrest- Cast Iron 124X296x5mm Thick And M.S. Plate Of 2Mm Thick Use To Support It. 10. Handle Is Connected With Frame By 8 Mm Laser Cutting Ms Profile 11. Bracket - 8Mm Thick Laser Profile Is Use To Support Paddle Frame. 12. Top Closing Cap- Dome Shape Made By Pp/Nylon/Hdpe Material. 13. Closing Caps - Pp/Nylon/Hdpe Material.. 14. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S.Pipe And Top Support Of M.S.Round Plate Of ? 250 Mm 8T 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing- Use Is 6005 Permanent Lubricated Reputed Brand. Pin- Made Up Of ? 25Mm M.S. Bright Bar Pin. Bearing Bushes - ? 60Mm Od Seamless Pipe. Grips - High Quality Rubber ? 46Mm Od. Circlips-A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. , Cross Trainer Single. Providing And Fixing Cross Trainer Single Made From 6.1. Pipe. Dimensions: (L X W X H)= 1140Xssox1650mm. 1. Main Frame- Made Of ?88Mm Od B Class Gl Pipe Dually Bending Design. 2. Foundation Plate - M.S. Round Plate Of ? 250Mm & 8 Mm Thick. 3. Paddle Vertical Support - ?42Mm Od B Class Gl Pipe. 4. Handle- ?33Mm Od “B Class Gl Pipe Dually Bending Design. 5. Leg Movement Frame- 50Mm X50mm X2mm Thick Square Pipe. 6. Footrest - Cast Iron 124X296x5mm Thick And M.S. Plate Of 2Mm Thick Use For To Support It. 7. Top Closing Cap - Dome Shape Made By Pp/Nylon/Hdpe Material. 8. Closing Caps- Pp/Nylon/Hdpe Material. 9. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S. Pipe, And Top Support Of M.S. Round Plate Of ?250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Grips - High Quality Rubber. Bearing- Use Is 6005 Permanent Lubricated Reputed Brand. Bearing Bushes - ? 60Mm Od Seamless Pipe. Pin -Made Of ? 25Mm M.S. Bright Bar. Circlips - A 24 Circlips Are Used For Assembly. Coating -Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. , Cross Trainer Double Providing And Fixing Cross Trainer Double Made From G.L. Pipe. Dimensions: (L X W X H)= 2280X550x1650mm. 1. Main Frame- Made Of ?88Mm Od B Class 61 Pipe Dually Bending Design. 2. Foundation Plate-M.S. Round Plate Of ? 250Mm & 8 Mm Thick. 3. Paddle Vertical Support - ?42Mm Od B Class Gl Pipe. 4. Handle- ?33Mm Od B Class 61 Pipe Dually Bending Design. 5. Leg Movement Frame- 50Mm X50mm X2mm Thick Square Pipe. 6. Footrest - Cast Iron 124X296x5mm Thick And M.S. Plate Of 2Mm Thick Use For To Support It. 7. Top Closing Cap - Dome Shape Made By Pp/Nylon/Hdpe Material. 8. Closing Caps- Pp/Nylon/Hdpe Material. 9. Foundation Stool: Made From Main Pipe ?88 Mm Od B Class 6.1.Pipe And Top Support Of M.S.Round Plate Of ?250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Grips - High Quality Rubber. Bearing- Use Is 6005 Permanent Lubricated Reputed Brand. Bearing Bushes -? 60Mm Od Seamless Pipe. Pin -Made Of ? 25Mm M.S. Bright Bar. Circlips - A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product , Arm And Paddle Bike. Providing And Fixing Arm And Paddle Bike Made From G.L. Pipe. Dimensions: (L X W X H)= 990X500x880mm. 1. Main Frame-100Mmx50mmx2.5Mm Rectangular Cr Pipe With Bending Design. 2. Foundation Plate-M.S. Round Plate Of ? 250Mm & 8Mm Thick. 3. Handle- ?33Mm Od B Class 61 Round Pipe Dully Bending Design. 4. Side And Top Cover-1.6 Mm Thick Ms Laser Cutting Profile Is Used. 5. Seat- 5Mm Thick Ms Laser Cutting Profile Is Used. 6. Paddie-100Mmx50mm Capsule Pipe And 40X16 Mm Ms Flat Is Use For Connecting The Paddle And Shaft. 7. Closing Caps- Pp/Nylon/Hdpe Material. 8. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S.Round Plate Of ? 250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing Bushes - ? 60Mm Od Seamless Pipe. Bearing- Use Is 6005 Permanent Lubricating Sealed Reputed Brand. Shaft -Made Up Of ?25Mm Od Ms Bright Bar. Circlips- A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. , Single Bar. Providing And Fixing Single Bar Made From G.L. Pipe. Dimensions: (L X W X H) 3550X2590mm. 1. Main Frame - Made From ?48 Od B Class G.L. Pipe. 2. Frame Of Single Bar - ?33 Od B” Class 6.1. Pipe. 3. Foundation Plate -M.S. Round Plate Of 0 250Mm & 8 Mm Thick. 4. Top Closing Caps- Decent Design Size Pp/Hdpe/Ms. Material 5. Foundation Stool: Made From Main Pipe ?88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of ?250 Mm & 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Made From Aluminum/Stainless-Steel Stick-On Product , Double Bar. Providing And Fixing Double Bar Made From 6.1. Pipe. Dimensions: (L X W X H) 1850X530x1980mm. 1. Main Frame - Made From ?48 Od B Class G.L. Pipe. 2. Remaining Frame - Made From ?48 Od *B Class G.L. Pipe 3. Closing Caps- Pp/Nylon/Hdpe Material. Foundation Stool: Made From Main Pipe ?088 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of ?250 Mm 8C 8Mm Thickness Is Welded Top. Square Tube Of 30X30x2 Mm Is Use For To Support Center Pipe. Height Of Stool Is 3Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Coating- Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product
