Bids Are Invited For 1 CONSTR 1 ISMB 150 RSJ 150 x 75mm 3.75mtr long conforming to relevant IS Make TATA/Sail/Jindal 2 CONSTR 2 ISMB 150 RSJ 150 x 75mm 3.90 mtr long conforming to relevant IS Make TATA/Sail/Jindal 3 CONSTR 3 ISMB 150 RSJ 150 x 75m, Kupwara-Jammu And Kashmir

Bids Are Invited For 1 CONSTR 1 ISMB 150 RSJ 150 x 75mm 3.75mtr long conforming to relevant IS Make TATA/Sail/Jindal 2 CONSTR 2 ISMB 150 RSJ 150 x 75mm 3.90 mtr long conforming to relevant IS Make TATA/Sail/Jindal 3 CONSTR 3 ISMB 150 RSJ 150 x 75mm 0.90 mtr long conforming to relevant IS Make TATA/Sail/Jinda 4 CONSTR 4 ISMB 150 x 75 mm 3.96 mtr long conforming to relevant IS 5 CONSTR 5 Steel beam ISMB 125mm ( RSJ 125 X 70mm) (2840 mm long) conforming to IS 808 1973 6 CONSTR 6 ISMB 150 (RSJ 150 x 75mm) 4.90mtr long conforming to relevant IS 7 CONSTR 7 Steel Roofing Trough SRT of size 2000 mm x 613 mm x 180 mm made out of 2 mm thick hot rolled carbon steel sheet conforming to relevant IS complete with set of a spanner OJDE of size 20-22 per 10 Nos of SRT SRTs shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer 8 CONSTR 8 Steel Roofing Trough SRT of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick hot rolled carbon steel sheet conforming to relevant IS complete with set of a spanner OJDE of size 20-22 per 10 Nos of SRT SRTs shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer 9 CONSTR 9 HDPE Sand Bag of size 75x40 cm, Sand colour and each bag having weight not less than 60 gms 10 CONSTR 10 LDPE sheet 5.49 Mtr wide weighing 1.00 Kg/RM black in color and shall contain not less than 2.0 percent of carbon black of and avereage particle size 0.01 to 0.02 micron well dispersed in mass 11 CONSTR 11 LDPE sheet for PCC Construction150 micron thick best quality 12 CONSTR 12 Low density polyethylene sheet 5.49 m wide, weighing 1.00 Kg/mtr black in colour and shall contain not less than 2.0% of carbon black of average particle size 0.01 to 0.02 micron well dispersed in mass sample to be approved before supply 13 CONSTR 13 MS hexagonal nuts, Bolts and washers 12 mm dia 40 mm long 14 CONSTR 14 Pre fabricated steel ventilator loop hole of size 1.20m x 0.30m shall be provided. The main frame work shall be MS channel U section (12mm grove x 6mm thick), MS sheet 2 mm thick of size 0.60 x 0.30m (02 Nos) for shutter will be fixed in MS U channel for smoothly sliding, two Nos bow handles are also provided for easy opening and sliding the shutters and for external side Acrylic sheet bottom hung shutters including all required iron mongery will be provided. Ventilators shall be shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer All materials shall conform to relevant IS Make TATA/SAIL/Jindal sample to be approved before supply. 15 CONSTR 15 Pre fabricated steel door of size 0.90m x 1.80m made out of 2mm thick MS black carbon sheet welded to 30x30x6mm ISA door shutter frame fitted to 50x50x6mm ISA door frame including 06 Nos hold fast 03 Nos 125mm long MS butt hinges 02 Nos MS tower bolt 200mm long 02 Nos MS bow handle 125mm long, one No MS sliding bolt 250mm long and door shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer All materials shall conform to relevant IS 16 CONSTR 16 Pre-fabricated steel loop holes of size 0.60M x 0.40M made out of MS flat iron of size 20 x 4mm and MS round bar 16mm dia with 6mm thick MS plate shutter including 03 Nos MS pintle hinges made of FI 35 x 4mm thick and MS tower bolt complete as per drawing. Loop holes shall be painted with two coats OG colour of synthetic enamel paint over a coat of red oxide primer 17 CONSTR 17 Pre-fabricated storage rack made out of angle iron 50mm x 50mm x 4mm thick 6 Nos of length 0.65 mtr, angle iron 50mm x 50 mm x 4 mm thick 2 Nos of length 1.80 mtr angle iron 50mm x 50 mm x 4 mm thick 6 Nos of length 0.45 mtr and MS sheet 2mm thick of size 1m x0.45m 02 Nos. Make: as per The mild steel racks will be provided with two coats of green paint over one coat of red oxide sample to be approved before supply 18 CONSTR 18 MS TMT bars 10 mm dia conforming to relevant IS Make : Kamdhenu/Tata/Sail 19 CONSTR 19 MS TMTbars 8 mm dia conforming to relevant IS Make Kamdhenu/Tata/Sail 20 CONSTR 20 MS TMT bars 16mm dia conforming to relevant IS Make TATA/SAIL/RINL 21 CONSTR 21 MS TMT bars 12mm dia conforming to IS 1786-1985 Make TATA/SAIL/RINL 22 CONSTR 22 MS TMT bars 8mm dia conforming to relevant IS Make TATA/SAIL/RINL 23 CONSTR 23 MS TMT bars 10 mm dia conforming to relevant IS 24 CONSTR 24 MS binding wire 0.9 mm dia annealed conforming to relevant IS 25 CONSTR 25 CGI Sheet of size 8 feet x 3 feet x 0.63mm thick conforming to relevant IS Make - TATA /SAIL/RINL 26 CONSTR 26 CGI Sheet of size 2500 x 885 x 0.63mm thick conforming to IS 277 1985 Make TATA /SAIL/RINL 27 CONSTR 27 Paint Synthetic Enamel 1st quality OG Make Asian-Apcolite/ Berger Luxol/ Shalimar Superlac/Nerolac 28 CONSTR 28 Synthetic Enamel Paint (Colour olive green) in 20 Ltr container Ist quality conforming to relevant IS of Make Nerolac Berger/Asian Paint 29 CONSTR 29 Red Oxide primer conforming to relevant IS 30 CONSTR 30 PBS Roll (self finished tarfelt) Grade I conforming to relevant IS of size 1.00 mtr width and 20.00 Mtr long wt not less than 42.50 plus minus 2.50 Kgs sample to be approved before supply 31 CONSTR 31 Thinner Sample to be approved before supply 32 CONSTR 32 Dry Distemper Sample to be approved before supply 33 CONSTR 33 Dry distemper Sample to be approved before supply 34 CONSTR 34 Paint Brush 4inch Make Amar/Lucky (Sample to be approved before supply 35 CONSTR 35 Nails all type 36 CONSTR 36 Water proof Ply wood 8 feet x 4 feet x 12mm Make National 37 CONSTR 37 Water Proofing Compound conforming to relevant IS Make JK/Birla 38 CONSTR 38 ISA 65x65x6 mm 2 mtr long conforming to relevant IS 39 CONSTR 39 CI Grating of size 300x 300mm with frame weight not less than 4 kg sample to be approved before supply 40 CONSTR 40 Chalk whiting Sample to be approved before supply 41 CONSTR 41 MS plate form work of columns footing of 1.2 x 1.2 x 0.6 m made of 1.20mm thick MS sheet using MS angle iron 40 x 40 x4 mm to all four sides and with one No cross bracing set on all sides with holes pre drilled for fixing with 12mm dia nuts and bolts. MS plate and angles shall ne applied two coats of red oxide primer 42 CONSTR 42 MS plate form work of columns footing of 0.45 x 0.45 x 0.9 m made of 1.20mm thick MS sheet using MS angle iron 40 x 40 x4 mm to all four sides and with one No cross bracing set on all sides with holes pre drilled for fixing with 12mm dia nuts and bolts MS plate and angles shall ne applied two coats of red oxide primer 43 CONSTR 43 Glass dividing strip 48mm x 3mm thick for flooring Sample to be approved before supply 44 CONSTR 44 Two Tier Sleeping Bunks(a) MS pipe two tier sleeping bunks as per CE 15 Corps Drawing No 3534/ OW/15 Corps / Two Tier Sleeping Bunk/ sheet 1/1 dated 10 Apr 218 attached with this TS A detachable ladder made up with 20 mm MS pipe with four steps to be provided in each bunk Male / female MS rectangular box of size 50 mm x 25 mm x 75 mm long to be welded two side protector bars of 15 mm dia MS pipe on top bunk to be welded as per details shown in drawing. The outer size of the bunk will be 1970 mm x 950 mm horizontally and 1950 mm x 950 mm vertically The Bunk should have provision to place a removable type matress of size 1830 mm x 910 mm to angle iron frame with adequate holes pre drilled in the frame All MS pipes shall be medium grade ISI mark and provided with two coats of superior quality Black Spray paint over a coat of red oxide primer(b) Two Nos single piece cushion made of 100 mm thick PUFfoam of density 40 Kg/cum as applicable for sleeping cushions to be provided with each bunk removable type of standard makeSleepwell/Kurlon of size 1830 mm x 910 mm The Puf Foam pasted on the ply wood shall be enclosed vinyl coated laminated upholtery cloth Rexene of specification as mentioned 45 CONSTR 45 GI Wire mesh crate box type size of mesh box (2000 x1000x1000mm) and size of mesh 100 x 100mm and dia of GI wire 3.40mm for outer support and 2.70mm for mesh with tolerance of 5 percent and confirming to relavant IS Make TATA/SAIL/Jindal sample to be approved before supply 46 CONSTR 46 Galvanised J hooks with bitumen cup washer including nuts 8 mm dia 150 mm long conforming to relevant IS (sample to be approved before supply). 47 CONSTR 47 Scantling timber 3 inch x 2 inch and 5 feet long 2nd class hard wood sample to be approved before supply 48 CONSTR 48 Wooden ballies of size 10 feet long and 6 inch dia at bottom. (Sample to be approved before supply 49 CONSTR 49 03 Nos MS rack of size 1.22m x 0.61m x 1.65m.Vertical legs and frame of the racks shall be fabricated out of MS slotted angle iron 65 x 35 x 3mm thick with 2 middle supports of FI 40x 6mm (1.88Kg/RM) in horizontal frame of racks. The rack will have 2 shelves with 12mm thick ply wood (Make : Kitply/ Green Ply). The plywood will be fixed with frame with the use of nuts and bolts of 12mm dia. The horizontal frame and vertical legs of the racks will be jointed with 12mm dia nut and bolt and angle iron cleats as required all as per drawings attached. 50 CONSTR 50 Fire extingusher. Fire extingusher 06 Kgs capacity, ABC powder, MAP-90 alongwith its accessories confirming to relevant IS 51 CONSTR 51 PVC SWR pipe 110 mm dia single socketed 3 mtr long Make-Supreme/Polycab/Finolex/Anchor. 52 CONSTR 52 Steel loop hole 610 mm x 330 mm fabricated with U channel frame work of size 25x25mm and 5mm thick and necessary FI to be fixed for sliding arregement with 6mm thick MS plate sliding shutter with necessary iron mongries including applying two coats of synthitic enamel paint over one coat of red oxide primer internally and acrelic sheet shutter externally bottom hined 53 CONSTR 53 Steel door confirming to IS 1038 1938 of size1800mm x 650mm, 3 Nos 125mm butt hinges 2 Nos MS tower bolt 200mm long 2 Nos MS bow handle 125mm long two No MS sliding bolt 250mm long all fittings fabricated with steel door and angle iron 40 x 40 x 6mm chowkat frame and shutter frame 35 x 35 x 5 mm including two coat of synthetic enemal paint over one coat of red oxide primer complete all are shown on drg All materials shall conforming to relevant IS 54 CONSTR 54 Steel lintel for door & Loop holes made out of ISA 35x35x5mm, 910 mm long complete all as per brief specification and drawing 55 CONSTR 55 Prefab steel Jally made up of ISA 30x30x3mm frame and 25x25x3mm 90mm center to center both ways welded to frame of size 900x900mm complete all as per specification 56 CONSTR 56 Mild steel Angle double shelf made out of MS Angle 35x35x5mm hold fast 130mm long and MS Sheet welded with the MS Angle 1.6mm complete all as per specification and drawing 57 CONSTR 57 Bitumen 80/20 grade. Make SHALIMAR or equivelent make 58 CONSTR 58 APP Membrane (for water proofing) conforming to IS 1322 198 of size 20m x 0.90m (weight of each roll shall not be less than 42.50 Kgs 2.5 Kgs in dry conditions The finished mtrl shall be free from visible external defect such as holes, oil patches, ragged or untrue edges brakes, cracks, tears, protuberances and indentations 59 CONSTR 59 Oil Bound Distemper of IVORY shade Make Asian/Berger/Shalimar 60 CONSTR 60 110mm dia UPVC SWR pipe single socketed pipe Type A in any length with rubber joint 61 Heating device Heating Device (Kerosene Based). Heating Device of following specifications will be provided with each shelter Make Paseco PSG 22G/Kero Heat CV 2230/ Toyotomi (i) Type of Heater Convection(ii) Heat Output Max. 23 000 BTU/hr(iii) Fuel Tank Integral(iv) Tank Capacity 1.9.U.S.gallons (7.1915 Ltrs)(v) Continuous Combustion Time Approx 8-12 hr(vi) Max.Fuel Consumption 0.167 U.S. gallons/hr 0.6321 Ltrs/hr(vii) Ignition Method Battery C Cell x 2, Igniter Type B (viii) Weight (empty) Approx 23 Ibs 10.4328 Kgs (ix) Dimensions.(a) Height 26.8 inches (b) Width 17.5 inches(c) Depth 17.5 inches(x) Wick Height 25/64 IN. (10mm) 62 CONSTR 62 Freshly burnt fat lime class C white in clour conforming to relevant IS 63 CONSTR 63 Wooden ballies 10 feet long and not less than 4 inch dia Sample to be approved before supply 64 CONSTR 64 Wooden scantling 50 x 75mm size 2100 mm long of 2nd class hard wood 65 CONSTR 65 Wooden planks 2nd class hard wood 20mm thick 300mm wide 1800 mm long 66 CONSTR 66 Provn of Solar lantern. Provn of solar Lantern comprising of 3 LED bulbs of power consumption 3 Watts each bulb each bulb combination of 3-4 LEDs with Built in chargeable battery 12 Volts 7.20 AH (SMF Lead acid battery) and solar panel 12 V 10W Polycrystalline with charging cable complete including all required accessories Make : ANDSLITE/TATA BP or equivalent 67 CONSTR 67 PVC sheets, 1.5 mm thick laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors sample to be approved before supply 68 CONSTR 68 Approved adhesive for setting of rubber tiles/linoleum sheets 69 CONSTR 69 PCC hollow blocks 400 mm x 200 mm x 200 mm using cement concrete type 1:3:6 16mm graded aggregate Hollow blocks shall be sound, free from cracks, broken edges honey combing and other defects that would interfere with the proper placing of blocks or impair the strength or performance of construction 70 CONSTR 70 Rapidite quick setting liquid 71 CONSTR 71 Integrated water proofing compound 72 CONSTR 72 PCC Solid blocks 400 mm x 200 mm x 200 mm minimum strength 50kg/sqcm. PCC shall conform to relevant IS Solid Block made out PCC 1:3:6 having the compressive strength 5 KN/Sqmm 73 CONSTR 73 Quick setting compound confirming to relevant IS Make Dr Fixit or Equivelent Make 74 CONSTR 74 RCC Beams 110x110x1420mm minimum M 25 Grade / Four Nos 8mm dia TMT bars, two each on top and bottom with 6mm dia MS bar stirrups spaced at 200mm c/c will be proviided as reinforcement. Steel Bar make to be used ISI marked only complete all as per drg, incl 2 Nos MS flat for size 40mmx50mm, and 150mm long nut bolt arrangement 75 CONSTR 75 60MM thick PCC inter locking coloured tiles machine pressed of M 35 grade each tile covering as area 0.0444 m2 Conform to relevant IS 76 CONSTR 76 Burnt Clay bricks of standard size confirming to relevant IS minimum crushing strength should not be less then 75 Kg/Sqcm sample to be approved before supply 77 ELECT 1 MCB Distribution board two way single door 78 ELECT 2 MCB 16 AMPs SP 240V 50Hz 10KA Cseries confirming to IS 8828 2001 79 ELECT 3 MCB 6 AMPs Single pole 240V 50Hz confirming to IS 8828-2001 IEC 60898 2002 Make L and T HAVELL SIEMENS LEGRAND/ SCHNEIDER Merlin and Gerin 80 ELECT 4 LED Tube light fitting 1 x 18W 4 feet long complete with all accessories including LED tube rod 81 ELECT 5 LED Bulb 7 Watt Make Havells/Bajaj/Philips/Syska 82 ELECT 6 Modular socket 6A 2/3 pin combined 2 module 83 ELECT 7 Modular Switch one way 6 AMPs one module confirming to relevant IS 84 ELECT 8 Modular socket 6A/16A 2/3 pin combined 2 module Make Havells/ Anchor/Legrand 85 ELECT 9 Modular switch one way 16 AMP 1 module Make Havells/ Anchor/Legrand 86 ELECT 10 PVC Insulated wire 1.5 Sq mm Copper conductor single core unsheathed Conforming to relevant IS 87 ELECT 11 PVC Ceiling Rose 2 to 3 terminal confirming relevant IS 88 ELECT 12 PVC casing capping 25 mm x 16mm 89 ELECT 13 PVC L bend 25 mm dia conforming to relevant IS 90 ELECT 14 PVC elbow 25 mm dia conforming to relevant IS 91 ELECT 15 PVC casing capping T 25mm 92 ELECT 16 PVC casing capping square box 4 inch x 4 inch 25mm 93 ELECT 17 PVC Rawal Plug 94 ELECT 18 PVC insulated aluminium cable 6 Sqmm 2 core conforming to IS 694 2005 Make Havells/ Polycab/Finolex 95 ELECT 19 PVC insulated aluminium cable 2.5 sqmm Twin core conforming to IS 694 2005 Make Havells/Polycab/Finolex 96 ELECT 20 PVC insulated aluminium cable 4 sqmm Twin core conforming to relevant IS Make Havells/Polycab/Finolex 97 ELECT 21 PVC saddle clip 20 mm as per approved sample 98 ELECT 22 PVC Junction box 2 to 3 way for 20 mm conduit pipe conforming to IS 3419 2001 sample to be approved before supply 99 ELECT 23 PVC Round block as per approved sample 100 ELECT 24 Rigid PVC conduit pipe dia 25 mm medium grade conforming to relevant IS Make Havels/Polycab/Finolex/ Anchor 101 ELECT 25 Flexible wire PVC insulated twin core of size 23/0.0076 with copper conductor confirming to relevant IS Make Finolex/Polycab/ Havells 102 ELECT 26 Tape insulation in 2 cm width 10 mtr long confirming to ISI 12714 103 ELECT 27 Main switch 16 Amp 2 pole 240 volt 50Hz conforming to IS 4064 Pt I II 2005 Make Havells/ Anchor/Legrand 104 ELECT 28 White cover plate with frame 2 module 105 ELECT 29 White cover plate with frame 3 module 106 ELECT 30 White cover plate with frame 4 moduleMake Havells/ Anchor/Legrand 107 ELECT 31 Metal flush box 2 Module 108 ELECT 32 Metal flush box 3 Module 109 ELECT 33 Metal flush box 4 Module 110 ELECT 34 MS screw 20 mm confirming to relevant IS pkt of 100 Nos 111 ELECT 35 MS screw 25 mm confirming to relevant IS pkt of 100 Nos 112 ELECT 36 MS screw 15 mm confirming to relevant IS pkt of 100 Nos sample to be approved before supply 113 ELECT 37 CP Screw 20mm 100 Nos Pkt 114 ELECT 38 CP Screw 35mm 100 Nos Pkt 115 ELECT 39 1.5 Sqmm multi strand copper conductor PVC cable conforming to IS Make Paragon/Kinjal/Finolex 116 ELECT 40 Junction box 4 way 20mm PVC conforming to relevant IS sample to be approved before supply 117 ELECT 41 Angle holder with skirt

Refer document

Refer document

INR 57.49 Lakhs /-