Estt. Ofquality Control / Material Testing Laboratory At Kupwarasupplyand Installation Of Laboratory / Field Equipment & Consumables As Part Of Creating Departmental Facility For Subsequent Quality Monitoring / Material Testing At District Material Testing Laboratorykupwara - 1 2000Kn Digital Compression Testing Machine ( Make Aimil ) Loading Range: 2000 Kn ( 200 T ) Least Count: 0.1 Knmaximum Clearance Between Platens: 370Mmmaximum Clearance Between Side Platens: 340Mmplaten Size: 222 Mm Dia.Platen Hardness: 612 Hv ( 55 Hrc ) Piston Dia: 222.2 Mmpiston Stroke: 50Mmmotor Hp: 1Motor Make: Godrej Or Crompton Greaves Power Requirement: 220 V / 230 V, I Phase, 50 Hz, Ac Supplyspecimen Size: 100Mm, 150Mm Cube, 100Mm & 150Mm Dia. Cylinderstandards: Is: 516 & Is: 14858Calibration Within 1% Of Full Scale Deflection With Traceability To Nabl.Powder Coating Finished Surface, Front Gate For Protectionthe Digital Readout Unit, Incorporates A 4 Digit Display, Calibrated In Kn And Features Integral Load Pacing In Kn / Sec.With Nabl Calibration ( Complete & Operational In All Respects ) 2 Electric Hot Air Oven ( With Calibration Certificate ) Superior Laboratory Electric Oven, Thermostatically Controlled Or With Digital Controller Cum Indicator With Safety Alarm. It Must Be Double Walled, With Outer Body Made Of Ms Powder Coated & Inner Made Of Stainless Steel. It Must Have Provision For Horizontal Ribs For Adjusting Trays At Any Height. Equipment Must Have Side Heating / Air Circulating Fan, To Distribute The Temperature Range 50°C To 250Degreec ± 1Degreec, With Air-Ventilators. The Size Of Oven Must Be 450X450x450 Cm, With Size Tolerance± 10Mm. Equipment Must Operate Under 220 V ( ±5% ) , 50Hz, Single Phase Ac Supplyequipment Must Be Of Good Make / Manufacture And Finish. ( Complete & Operational In All Respects ) 3 Vicat Apparatuswith Isi Certification Mark, 15:5513The Equipment Consist Of The Following Replaceable Parts :Vicat Mould, Glass Base Plate, Initial Needle ( In Plastic Case ) , Final Needle ( In Plastic Case ) , Consistency Plunger ( In Plastic Case ) , Mild Steel Base Plate, Vicat Mould Split Type, With Clamping Ring ( Complete & Operational In All Respects ) 4 Iss Sieve Sets ( As Per Specifications Of Is:460 ) Iss Gi-Frame Sieve Set. ( Size 30Cm Dia ) A ) 80 Mmb ) 63 Mmc ) 45 Mmd ) 40 Mme ) 37.5 Mm F ) 26.5 Mmg ) 20 Mmh ) 19 Mmi ) 16 Mm J ) 13.2 Mmk ) 12.5 Mml ) 11.2 Mmm ) 10.0 Mmn ) 9.5 Mmo ) 6.3 Mmp ) 5.6 Mmq ) 2.8 Mm R ) 4.75 Mms ) 3.35 Mm T ) 2.36 Mm ( Complete & Operational In All Respects ) . 5 Iss Sieve Sets ( As Per Specifications Of Is:460 ) Iss Brass Sieves. ( Size 20Cm Dia ) ; Sizes ( Mm / Micron-Μ ) : A ) 4.75 Mm B ) 2.36 Mm C ) 1.18 Mmd ) 0.600 Mme ) 0.425 Mmf ) 0.300 Mmg ) 0.150 Mmh ) 0.090 Mm I ) 0.075 Mm ( Complete & Operational In All Respects ) . 6 Centrifuge Extractor, Capacity 1500 Kg. Electrically Operatedref. En 12697-1, Astm D 2172, Aashto T-58, T-164For Determining Bitumen Percentage In Bituminous Paving Mixturesit Should Be Compact With In-Built Dimmerstat For Speed Variation From 0 Rpm To 3600 Rpm. It Should Be Supplied Complete With A Set Of 25 Filter Paper Discs. Suitable For Operation On 220 V, 50 Hz, Single Phase, Ac Supply. ( Complete & Operational In All Respects ) 7 Benzene Or Petrol ( As Solvent ) . 8 Cube Mould, Isi Mark 150 Mm Cube ( 150Mmx150mmx150mm ) 9 Slump Test Apparatusref. Standards Is:7320, Bs:1881 , Astm C 143, Aashtot119 ( Complete & Operational In All Respects ) 10 Precision Electronic / Digital Balance, With Dual Power Operation ( Ac / Battery ) Cas: Superior Brand Precision Digital Balance ( 5 Kg ) , Capable Of Measuring 0.5 Gm To 5 Kg With Permissible Error. ( Complete & Operational In All Respects ) 11 Precision Electronic / Digital Balance, With Dual Power Operation ( Ac / Battery ) Cas:Superior Brand Precision Digital Balance ( 30Kg ) , Capable Of Measuring 1.0 Gm To 30 Kg With Permissible Error. ( Complete & Operational In All Respects ) 12 Aggregate Impact Testing Machine ( As Per Specifications Of Is:9377 ) Standard Aggregate Impact Testing Machine For Determination Of Impact Value For Small Size Mineral Aggregates / Rocks. Equipment Must Be Of Good Make / Manufacture And Finish. ( Complete & Operational In All Respects ) 13 Aggregate Crushing Valueref Stn: Is-9376Consists Of:Cylinderical Cellpungerbase Platetempering Rodmetal Measure ( Complete & Operational In All Respects ) 14 3 Meter Straightedge And Metric Wedge 15 Thickness Gaugems Thickness Gauge With Minimum Gauging Depth Of 150Mm ( Complete & Operational In All Respects ) 16 Electronic Theodolitetelescope: ( I ) Magnification 30X ( Ii ) Image Erect ( Iii ) Field Of View 1º 30’ ( Iv ) Minimum Focusing Distance 1 Mangle Measurement: ( I ) Standard Deviation For Horizontal & Vertical Angle ( Angular Accuracy As Per Din 17123-3 ) 2” ( Ii ) Least Count 0.1 Seccompensator: ( A ) Typeelectronic And Dual Axisdistance Measurement: ( I ) With Reflector 5 Km ( A ) Long Mode Prism 3 Km ( B ) Single Mode Prism 800M ( C ) With Reflector Sheet 600M ( Ii ) Without Reflector Range+ / - ( 2Mm + 2Ppm ) ( Iii ) Accuracy+ / - ( 3Mm + 2Ppm ) Plummet For Centering: ( A ) Centering Device Laser Plummetmotion Drives ( Horizontal & Vertical Knobs ) Endless Friction Drives.Data Storage: Internal Memory4 Gb Internal Memoryon Board Software Windows Ce 7 Based Which Have On Board Programs For Orientation & Surveying, Height Transfer, Remote Height, Offset Stake Out, Area & Volume Calculation, Area Subdivision, Visible Layout, Map, Traverse And Its Adjustments, Feature Coding, Can Display The Point, Lines Or Polygon Surveyed In The Field, It Also Provides Direct Output As Dxf. File.Battery: ( A ) Typelithium-Ion Batteries. ( B ) Operating Timeit Has An Operating Time Of 10 Hours With 2 No. Batteries Which Comes With It.Display & Keyboarddisplay On Both Faces-Colored Sun Readable Display With Touch Having Alphanumeric Keypad On Both Faces.Import And Exportit Can Import And Export Csv, Cad Landxml And Shapefileenvironmental Specifications: ( A ) Working Temperature Range- 20°C To + 50°Cguide Lightpresent- 4 Levelweight 6.1 Kgmeasuring Speed With / Without Prism 1 Sec / 5 Secsensorautomatic Temperature And Pressure Sensor Is Also Present.Dust / Water Rating Ip55accessories With Each Ts: - ( I ) Universal Telescopic Tripod Wooden Stand = 1 Nos. ( Ii ) Telescopic Pole For Prism = 1 Nos. ( Iii ) Single Prism With Holder And Target Plate = 1 Nos. ( Iv ) Internal Battery = 2 Nos. ( V ) Dual Battery Charger = 1 No. ( Vi ) Tribrach Without Optical Plummet = 1 Nos. 17 Proctor Compaction Apparatus As Per Bs Coderef. Standards Is:2720 ( Part 7 ) , Is:2720 ( Part 8 ) Is:9198, Is:10074, Bs:1377 Astm D 698, D I557 18 Portable Diamond Core Drill 200Mm Capacity ( Make Hilti / Eibenstock ) Max Core Capacity : 200Mmoperation: Horizontal / Verticalshould Be Supplied With With 100 Mm Bit ( Complete & Operational In All Respects ) 19 Consistency Test Apparatus The Test Apparatus Must Be As Per Is: 2720 Part-5, Is: 9259 Relevant Specifications, For Determination Of Consistency ( Liquid Limit ) Of Soils By Casagrande Method. The Apparatus Must Be Manually Operational, With Counter, With Is / Bs / Astm Grooving Tools, Gauging Block.Equipment Must Be Of Good Make / Manufacture And Finish. ( Complete & Operational In All Respects ) 20 Flakiness Apparatus ( Shape Testas Per Is Specifications / Sp-36, Is:2386 ( Part-1 ) Equipment Must Consist Of Following: Thickness Gauge Manufactured From Heavy Gauge Steel With Is-Certification Stamp.Equipment Must Be Of Good Make / Manufacture And Finish. ( Complete & Operational In All Respects ) 21 Elongation Apparatus ( Shape Test ) Length Gauge Manufactured From Superior Steel, Mounted On A Hardwood Base, With Is-Certification Stamp. Equipment Must Be Of Good Make / Manufacture And Finish. ( Complete & Operational In All Respects ) 22 Sand Pouring Cylinder Apparatus, 100Mm Diaref. Standard Is:2720 ( Part 28 ) Thisapparatus Is Used For Determination Of The Dry Density Of Compact, Fine, Medium Grained Soils And For Layers Not Exceeding50 Cm Thickness. A Circular Hole Is Dug Into The Ground, All The Soil From Within It Collected, Weighed And Dried, And The Hole Back-Filled With A Standard Uniform Sand Or Fine Gravel, Poured From A Calibrated Container For Calculating The Volume Of Hole.The Equipment Consist Of The Following Replaceable Parts :Aim 16201 Sand Pouring Cylinder Fitted With Conical Funnel And Shutter, Capacity 3 Litre 1 Noaim 16202 Cylindrical Calibration Container 100 Mm Id X 150 Mm Height 1 No.Aim 16203 Metal Tray Size 30 X 30 X 4 Cm, With 10 Cm Central Hole 1 No. 23 Motorised Sieve Shakerequipment Must Consist Of Motorized Sieve Shaker For Sieving Dry Granular Or Powdered Materials / Soils. It Must Accommodate Up To 8 Sieves Of 20 Cm Dia. The Equipment Must Be Geared Motor Driven Of Suitable Hp. Direction Of Inclination Of Sieve Table Must Change Progressively In Clock-Wise Direction, With Both Gyratory And Tapping Motion Of Table. Equipment Must Be Controlled By A Proper Switching Device With Timer Facility And Emergency Stop / Start Button. Equipment Must Run By 220 V ( ±5% ) , 50Hz, Single Phase Ac Supply.Equipment Must Be Of Good Make / Manufacture And Finish. ( Complete And Operational In All Respects ) 24 Precision Infrared Thermometerdigital Non-Contact Infrared Thermometer ( Make: Fluke ) , With Backlight Lcd Display, Battery Powered, With Minimum Operational Temperature Range Of -20 Degreec To 300 Degree C ( Or Better ) , Display Resolution Of At Least 0.1 Degree C, Suitable Spectral Response, Class-2 Laser Power With Display Hold Feature. ( Complete & Operational In All Respects ) 25 Schmidt Rebound Hammer Digitalnormal And High Strength10 -100 Mpa Technologyoptical Rebound Velocity Quotient Impact Energy2.207 Nmdigital Display100 X100 Px , Back-Lit Connectivitybluetooth® 4.0 Edr Low Energy To Ios® Or Android® Devicerebound Value Calculation En12504-2; Astm C805; Jgj-T23; Jsce; Jis; Meanunits N / Mm2mpa, Psi, Kg / Cm2form Factor Correctioncube, 2:1 Cylinder, 1:1 Core, User-Definable Carbonation Correction User-Definablereference And Custom Curves Reference Curves For Europe, China And Russia Custom Curves ( Required By Major Standards ) En13791 Characteristic Strength Determination Using Rebound Value Alonememory Capacity Operating Temperature 0 To 50°C / 32 To 122 °F Operating Humidity Ca. 20000 Impacts Impacts Per Seriesmax. 70Batteryremovable, 1X Aaa ( Alkaline Or Rechargeable ) , Flight-Safe Battery Autonomy > 20000 Impacts Operating Humidity <95% Rh , Non- Condensing Storage Temperature ( -10 To 70 Degree Celcius / 14 To 158 Degree Farenhiet ) Anvil Typeportable Testing Anvil 26 Speedy Moisture Meter, Range 0-25% ( Gauge Div.:0.5% ) With Digital Weighing BalanceRef. Standards: Is:2720 ( Part 2 ) , Is:12175Using A Speedy Moisture Meter, The Moisture Content Of Soil, Sand And Other Fine Grained Material Can Be Obtained Quickly With Reasonable Accuracy. The Test Technique Is Based On The Fact That Water Will React With Calcium Carbide Toform Acetylene Gas And The Quantity Of Gas Formed Is Directly Proportional To The Water Present, Leaving A Surplus Ofthe Chemical Used In The Test. The Quantity Of Acetylene Gas Produced Is Indicated On A Built-In Pressuregauge Which Is Calibrated In Percentage Of Moisture On Wet Weight Basis. A Conversion Formula Gives The Corresponding Moisture Content Based On Dry Weight.The Equipment Consist Of The Following Replaceable Parts :Aim 03602 Moisture Gauge, 0-25 % × 0.5% 1 No.Aim 03601 Calcium Carbide Reagent 1 No. 27 Infra-Red Moisture Meter Ref. Standard: Is:2720 ( Part 2 ) Suitable For Operation On 220 V, 50 Hz, Single Phase, Ac Supply.Oven Methods : Above 50%Capacity : 5G Approx.Sensitivity : 10Mg Approx.Range : 0 To 1 00% Moisture Content On Wet Weight Basis.Reading Accuracy : ± 0.20%Probable Error : ± 0.25% In The Lower Range Upto Compared To 25% And ± 1% For Moisture Contentsthe Equipment Consist Of The Following Replaceable Parts :Torsion Wirethermometer ( L-Shaped ) Infra Red Lamp 28 Direct Shear Test Apparatus2 Kn Capacityref. Standards Is:2720 ( Part13 ) , Bs 1377, Astm D 3080The Direct Shear Test Is Carried Out With An Apparatus Consisting Of A Square Divided Into Two Halves. The Specimen, Contained In The Box, Is Subjected To A Constant Normal Load While An Increasing Horizontal Force Is Applied To One Of The Sections Of The Shear Box. This Force Causes A Shear Failure Along The Junction Between The Box Sections. The Shear Force And The Normal Load Are Measured Directly. The Rate Of Strain Is Adjusted By The Speed Of The Horizontal Force Applied. The Loading Unit Has V-Strips On Which The Shear Box Housing Rests. Suitable For Specimens Of Size 60X60x25mm. The Precalibrated Load Yoke Helps Counter Balance The Loading System. The Load Yoke With Direct And Through Lever System For Applying Normal Load Upto 3 Kg / Cm2 Capacity, Fixtures For Proving Ring, Brackets For Holding Consolidation And Strain Dial Gauges Are Provided. The Lead Screw Connected To The Shear Box Housing Helps Application Of Shear Stress. Suitable For Operation On 220V, 50Hz, Single Phase, Ac Supply.Models Offered Are:Direct Shear Apparatus, 2 Knref. Standards Is :11229, 2720 ( Part 13 ) • Type Of Shear :Direct I Residual Measurement• Operation :Motorised• Rates Of Strain: 1.25, 0.625, 0.25, 0.125, 0.05, 0.025, • ( Mm / Min ) : , 0.005, 0.002, 0.001 , 0.0004, 0.0002• Specimen Size: 60 X 60 X 25 Mmthe Equipment Consist Of The Following Replaceable Parts :• Shear Box Assembly• This Assembly Comprises Of :• Halves Of The Shear Box• Plane Gripper Plate• Perforated Gripper Plate• Porous Stone• Top Loading Pad• Base Plate• Shear Box Housing With Two Linear Bearing Case With Steer• Specimen Cutter• Surcharge Weights To Attain Normal Stress Of 3 Kg / Cm2this Surcharge Weight Set Comprises Of Following Weights :• 0.05 Kg / Cm2• 0.10 Kg / Cm2• 0.20 Kg / Cm2• 0.50 Kg / Cm2• Kg / Cm2compression - Tension Proving Ring, 2 Kn Capacitydial Gauge 0-25 X 0.01 Mmwith Calibration Certificates 29 Vane Shearvane Shear Tests Are Conducted Where It Is Difficult To Obtain Suitable Specimens Or Where Intrusion From A Sampling Tube May Cause Too Much Of A Disturbance. The Validity Of Strength Test Results Carried Out On Soils Which Have A Shear Strength In The Order Of 15Kn / M2 Or Lower, Is Very Largely Dependent On The Care And Skill With Which The Operator Conducts The Test. Disturbance Of These Types Of Soft Soil, Particularly The Sensitive Clays, Takes Place When Sampling Tubes Are Pushed Into Them. Experience Has Shown That Carefully Controlled Compression Test Results Can Be Related To Figures Obtained By Pushing A Small Vane Into The Soil Rotating At The Controlled Rate And Measuring The Force Required To Maintain A Maximum Reading Of Resistance.Laboratory Vane Shear Apparatus, Motorisedref. Standard Is:2720 ( Part 30 ) Aim 108-1Consists Of A Special Motor, Adjustable In Height By Means Of A Lead Screw Rotated By A Drive Wheel To Enable The Vane To Be Lowered Into The Specimen. Rotation Of The Vane Is By Means Of An Electric Motor Turns The Upper End Of A Calibrated Torsion Spring To Give A Rotation Of 0.1 ° / Sec. The Vane Shaft Is Attached Through The Hollow Upper Shaft To A Resettable Pointer Which Indicates The Angle Of Torque On A Dial Graduated In Degrees. The Dial Reading Multiplied By Spring Factor Gives The Torque.Rate Of Rotation : 1 / 60 Rpmsuitable Foroperation On 220 V, 50 Hz, Single Phase.Ac Supply.The Equipment Consist Of The Following Replaceable Parts :• Container 1 No.• Set Of 4 Springs, ( One Each Of Capacity 2 Kg-Cm, 4 Kg-Cm, 6 Kg-Cm And 8 Kg-Cm ) 30 Curing Tank For 24 / 48 Cubes Of 150 Mm / 70.6 Mm Sizetemperature Range: Ambient+ 5°C To 95-100°C Curing Temperature For Concrete In Lab Environment For Temperature Range -23±~C&Relativehumidity-50 ± 10%. The Tank Has Been Designed To Accommodate 150 Mm / 70.6 Mm Casted Cubes Up To 24 / 48 Cubes And Fully Insulated, Complete With A Hinged Lid, Heater, Thermostat And Recirculation Pump. Provision Of Two Removable Racks Allowing Free Circulation Of Water Around Each Cube. The Pump, Drain Valves And Electrical Equipment Are Housed In A Compartment Located At One End Of The Tank. Suitable For Operation On 440V, 50Hz, Three Phase, Ac Supply ( Complete & Operational In All Respects ) 31 Sample Tray ( Enamel Tray ) , Size 650X500x50mm 32 Sample Tray ( Enamel Tray ) , Size 600X450x50mm 33 Sample Tray ( Enamel Tray ) , Size 450X300x40mm 34 Sample Tray ( Enamel Tray ) , Size 300X250x40mm 35 Supply And Installation Of High Performance Automatic Generator Water Cooled With Build Ats
