Tender For Supply And Installation Of Aluminum Partition And Furniture Items Tender For Supply And Installation Of Aluminum Partition And Furniture Items , Supply And Installation Of Aluminium Partition And Furniture Items , Partition Aluminum Section W, gwalior-Madhya Pradesh

Tender For Supply And Installation Of Aluminum Partition And Furniture Items Tender For Supply And Installation Of Aluminum Partition And Furniture Items , Supply And Installation Of Aluminium Partition And Furniture Items , Partition Aluminum Section With Plpb ( Subject To Actual Measurement At Sight ) : 18 Gauge Thick Aluminiumpartition Up To 4 Feet Height .10 Mm Thick Pre-Laminated Particle Board With Decorative Lamination On Both Sides, Flat Pressed Three Layer Or Graded Wood Particle Board , In Paneling Fixed In Aluminum Doors And Partition Frame With Stainless Steel Screws Etc., Complete As Per Directions Of Engineer- In-Charge Corrosion Treatment Of Surface. , Table: Et-1350- Size:- Length:1350Mm, Width: 600Mm, Height:750Mm, C– Frame Leg 200Mm Wide Made Of Aluminium Profile And Cold Rolled Close Annealed Formed Sections, Having Provision For Wire Management. Topmade Of 25Mm Thickpre-Laminated Particle Board. Pvc Edge Beading Of 2Mm Thick By Through Feed Machine. Dotted Embossed Cable Duct And Perforated Steel Modesty Panelon Visitor’S Side .All Steel Components Are Epoxy Powder Coated After Seven Tanks Anti Corrosion Treatment Of Surface. The Overall Appearance Of The Product Shall Be As Per Photograph. , Side Runner-Sdu With Drawer: Sdu With Drawer- Size: Height:750Mm, Width:900Mm, Depth:400Mm. Body Part Made-Up Of Prime Quality Cold Rolled Close Annealed Sheet Use Only Mig / Tig & Spot Welding For Fabrication. Topmade Of 18Mm Thickpre-Laminated Particle Board. Side Edges Covered With Pvc Edge Band On Edge Bending Machine. Provision Ofdrawer Below Table Top With Telescopic Channel. Superior Quality Make Lock. Pvc Handles. Doors In Cold Rolled Close Annealed M.S. Sheet. Doors Are Top Hung Slide On Roller Bearing. All Steel Components Are Epoxy Powder Coated Followed By Seven Tanks Anti Corrosion Treatment Of Surface. The Overall Appearance Of The Product Shall Be As Per Photograph. , Hi-Back Chair- Size: Total Height-1050-1150Mm, Depth 600Mm, Width-535Mm Seat Height:420-520Mm. 5-Prong Nylon Base For Stability. Twin Wheel Heavy Duty Castor For Easy Mobility Under Load. Hot Pressed Ply Wood With Steel T-Nutsfor Rigid Fastening. Sturdy Steel Column Gas Lift For Centre Support And Seat Height Adjustment. Telescopic Abs Cover Over Steel Column. Lockable Centre Tilt Mechanism And With Single Piece Integral Skin Pu Arm Rest. Qualitytapestry With Pvc Beading All Around. High Density Moulded Pu Cushion. Upholstery2.0 Mtr. Over All Appearance Of Product As Shown In Picture. , Chair - Size:-Overall H: 830Mm, Seat H: 460Mm, D: 580Mm, W: 535Mm: Under Structure Made Of19mm Dia Ms Cold Rolled Close Annealed Tube 1.2 Mm Thick, Duly Powder Coated After Anti Corrosion Treatment Of Surface. Seat And Back Are Made Of 12Mm Thick Hot Pressed Ply Wood With High Density Pu Foam, Upholstered With Fine Quality Fabric. Arms Tubular. Steel Components Are Epoxy Powder Coated Followed By Seven Tanks Anti Corrosion Pre-Treatment Of Surface. Upholstery0.6 Mtr. Overall Appearance As Per Photograph. , Construction Of Chamber For 100Mm Sluice Plates , Construction Of Chamber For 100Mm Sluices Valve , Supplying, Conveying And Fixing Spls. Including Ea , Supplying, Conveying And Fixing Spls. Including Eart , Construction Of Chamber For 100Mm Sluice Plates , Construction Of Chamber For 100Mm Sluices Valve , Laying And Jointing Pvc Pipe. Heading , Plain Cement Concrete 1:4:8 ( One Cement Four Fine Aggregates And Eight Coarse Aggregates ) Using , Brick Work In C.M 1:5 Mix Using 2Nd Class Ground Moulded Chamber Burnt Bricks With Including Cost , Construction Of Chamber For 100Mm Sluices Valve , Construction Of Chamber For 100Mm Sluices Valve

INR 1000 /-

INR 30000.0 /-

Refer document