Bids Are Invited For Boqauto Extension If Any Seller Submits Price In Last 15 Minutes, The Rawill Be Auto Extended By 15 Minutes. ( For Anunlimited Time ) Mse Total Quantity : 1---1 695200220 1.144M WIDTHX1.00MM THICK ALUMINIUM HI-CREST SHEETMILL FINI, MANGALORE-Karnataka

Bids Are Invited For Boqauto Extension If Any Seller Submits Price In Last 15 Minutes, The Rawill Be Auto Extended By 15 Minutes. ( For Anunlimited Time ) Mse Total Quantity : 1---1 695200220 1.144M WIDTHX1.00MM THICK ALUMINIUM HI-CREST SHEETMILL FINISHED CONDITION HAVING NOMINAL 46MM DEEP RIBS WITH SUBTLE SQUARE FLUTING IN THE SIX PANS OF NOMINAL 175MM C/C DISTANCE.THE BASE MATERIAL SHALL BE AA3104 ALUMINIUM ALLOY COIL MADE FROM VIRGIN ALUMINIUM CONFIRMING IS-737 AND TEMPER H-18. THE ALUMINIUM ALLOY MANUFACTURERS TEST CERTIFICATE FOR CHEMICAL & MECHANICAL PROPERTIES OF ALUMINIUM SHALL BE SUBMITTED. TOLERANCE IN THCIKNESS SHALL BE AS PER IS 2676-1981.(SHEETS SHALL BE SUPPLIED AS PER ANNEXURE-A) 2 695200204 1.144M WIDTHX0.81MM THICK ALUMINIUM HI-CREST SHEETMILL FINISHED CONDITION HAVING NOMINAL 46MM DEEP RIBS WITH SUBTLE SQUARE FLUTING IN THE SIX PANS OF NOMINAL 175MM C/C DISTANCE.THE BASE MATERIAL SHALL BE AA3104 ALUMINIUM ALLOY COIL MADE FROM VIRGIN ALUMINIUM CONFIRMING IS-737 AND TEMPER H-18. THE ALUMINIUM ALLOY MANUFACTURERS TEST CERTIFICATE FOR CHEMICAL & MECHANICAL PROPERTIES OF ALUMINIUM SHALL BE SUBMITTED. TOLERANCE IN THCIKNESS SHALL BE AS PER IS 2676-1981.(SHEETS SHALL BE SUPPLIED AS PER ANNEXURE-B) 3 695200253 2.5M L X 0.6M W X 0.81MM THICK ALUMINIUM ROOF RIDGEMILL FINISHED CONDITION, THE BASE MATERIAL SHALL BE AA3104/AA3105/AA8011 ALUMINIUM ALLOY COIL MADE FROM VIRGIN ALUMINIUM CONFIRMING IS-737 AND OF SUITABLE TEMPER TO ALLOW REQUIRED BENDING. ALUMINIUM ALLOY MANUFACTURERS TEST CERTIFICATE FOR THE CHEMICAL AND MECHANICAL PROPERTIES OF ALUMINIUM SHALL BE SUBMITTED. TOLERANCE IN THICKNESS SHAL BE AS PER IS 2676-1981. 4 695200261 2.5M L X 0.6M W X 0.81MM THICK ALUMINIUM CORNER FLASHINGMILL FINISHED CONDITION, THE BASE MATERIAL SHALL BE AA3104/AA3105/AA8011 ALUMINIUM ALLOY COIL MADE FROM VIRGIN ALUMINIUM CONFIRMING IS-737 AND OF SUITABLE TEMPER TO ALLOW REQUIRED BENDING. ALUMINIUM ALLOY MANUFACTURERS TEST CERTIFICATE FOR THE CHEMICAL AND MECHANICAL PROPERTIES OF ALUMINIUM SHALL BE SUBMITTED. TOLERANCE IN THICKNESS SHAL BE AS PER IS 2676-1981. 5 660110180 1.144M WIDTH X 2.0MM THK TRANSLUCENT POLYCARBONATE SHEETPOLYCARBONATE TRANSLUCENT SHEET OF EMBOSSED TYPE TO BE USED AS SKYLIGHT MATCHING WITH ALUMINIUM HI-CREST SHEET PROFILE HAVING 46MM DEEP RIBS & SIX PANS OF NOMINAL 175MM C/C DISTANCE.(SHEETS SHALL BE SUPPLIED AS PER ANNEXTURE-B) 6 581008232 12 GAUGE -24 TPI -95MM LONG CS SELF DRILLING/TAPPING SCREW FLANGE WASHER HEAD SELF DRILLING/TAPPING SCREW HAVING BASE MATERIAL AS CARBON STEEL & PROTECTIVE COATINGS CONFIRMING CLASS 3/ 4/5 WITH ADDITIONAL METAL BONDED EPDM WASHER. DRILL CAPACITY (STEEL PENETRATION) OF THE SCREW SHOULD BE SUFFICIENT TO DRILL MS PURLINS UPTO 12MM THICK. 7 581008224 10 GAUGE -16 TPI -20MM LONGCS SELF DRILLING /TAPPING SHEETS STITCHING SCREWFLANGE WASHER HEAD SELF DRILLING/TAPPING SCREW HAVING BASE MATERIAL AS CARBON STEEL & PROTECTIVE COATINGS CONFIRMING CLASS 3/ 4/5 WITH ADDITIONAL METAL BONDED EPDM WASHER. SCREW SHOULD BE SUITABLE TO BE USED AS STITCHING SCREW TO ENSURE PROPER STITCHING OF 2 SHEETS. 8 539910018 8MM DIA, 200MM LENGTH ALUMINIUM L-BOLT WITH NUT, PLATE WASHER, EPDM WASHER & BITUMIEN WASHER, THREAD - 50MM ASSEMBLY OF L-HOOK, 1MM THICK ALUMINIUM PLATE WASHER, SQUARE/HEX ALUMINIUM NUT, EPDM WASHER & BITUMN WASHER. (BOLTS SHALL BE SUPPLIED AS PER DRAWING IN ANNEXURE-C) 9 539901546 8MM DIA, 380MM LENGTH ALUMINIUM J-BOLT WITH NUT, PLATE WASHER, EPDM WASHER & BITUMEN WASHER, THREAD - 50MM.ASSEMBLY OF J-HOOK, 1MM THICK ALUMINIUM PLATE WASHER, SQUARE/HEX ALUMINIUM NUT, EPDM WASHER & BITUMN WASHER.(BOLTS SHALL BE SUPPLIED AS PER DRAWING IN ANNEXURE-D) 10 539901140 M5X40MM COMPLETE SET OF GI STITCH BOLT. A SET SHALL CONSIST OF AN ASSEMBLY OF A FLANGE WASHER HEAD FULL THREADED BOLT, 1 NO. OF SUITABLE SQ/HEX NUT & 2 NOS. OF GI CIRCULAR PLATE WASHERS OF SIZE 25MM OD X 6MM ID X 1MM THICK. 11 539910125 25MM OD X 6MM ID X 2MM THICKCIRCULAR RUBBER WASHER 6MM DIA. HOLE 12 539901132 1MM THICK ALUMINIUM CYCLONIC /STORM WASHER WITH SOFT EDPM FULL SEALING BASE LAYER SUITABLE FOR APPLICATION WITH ALUMINIUM ROOFING SHEETS. ALUMINIUM ALLOY MILL FINISH IN MATCHING CREST PROFILE OF SHEETS. STORM WASHER MUST BE SUPPLIED WITH BONDED, SOFT CLOSED-CELL, EDPM RUBBER TO FORM A WATERTIGHT BARRIER SEAL AGAINST THE SHEET WHEN COMPRESSED & HAVING ADDITIONAL RIB TO GIVE ADDITIONAL STRENGTH.

Refer document

Refer document

Refer document