Comprehensive Maintenance, Supply Of Materials And Providing Services Of Manpower For Day To Day Maintenance Work Of Various Buildings Under Sd M-2314 ( I.T.I Staff Quarters Vivek Vihar, I.T.I Old Building Vivek Vihar, I.T.I Shahdara Vivek Vihar, Fire Station Tahirpur And Fire Station Gt Shahdara ) Delhi During 2021-22. ( 1St Recall ) - 1 Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As 10 Sqm On Plan Including Getting Out And Disposal Of Excavated Earth Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge: 2 All Kinds Of Soil 3 Excavating Trenches Of Required Width For Pipes, Cables, Etc Including Excavation For Sockets, And Dressing Of Sides, Ramming Of Bottoms, Depth Upto 1.5 M, Including Getting Out The Excavated Soil, And Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering, Etc. And Disposing Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M : 4 All Kinds Of Soil 5 Pipes, Cables Etc. Exceeding 80 Mm Dia. But Not Exceeding 300 Mm Dia 6 Filling Available Excavated Earth ( Excluding Rock ) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Upto 1.5 M. 7 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 8 1:2:4 ( 1 Cement : 2 Coarse Sand ( Zone-Iii ) : 4 Graded Stone Aggregate 20 Mm Nominal Size ) . 9 1:5:10 ( 1 Cement : 5 Coarse Sand ( Zone-Iii ) : 10 Graded Stone Aggregate 40 Mm Nominal Size ) . 10 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 11 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) : 3 Graded Stone Aggregate 20 Mm Nominal Size ) . 12 Reinforced Cement Concrete Work In Walls ( Any Thickness ) , Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 13 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) : 3 Graded Stone Aggregate 20 Mm Nominal Size ) . 14 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For All Heights : 15 Walls ( Any Thickness ) Including Attached Pilasters, Butteresses, Plinth And String Courses Etc. 16 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. 17 Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 18 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth In: 19 Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 20 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 21 Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 22 Providing And Laying Polished Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building, All Complete As Per The Architectural Drawings, With 18 Mm Thick Stone Slab Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade, Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. 23 Polished Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. 24 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows, Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. 25 Kiln Seasoned And Chemically Treated Hollock / Marandi Wood 26 30 Mm Thick Shutters 27 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick : 28 Fly Proof Stainless Steel Grade 304 Wire Gauge With 0.5 Mm Dia. Wire And 1.4 Mm Wide Aperture With Matching Wood Beading 29 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 ( Part I ) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters. 30 30 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws 31 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 ( Part I ) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 32 30 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws 33 Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete : 34 300X16 Mm 35 250X16 Mm 36 Providing And Fixing Isi Marked Oxidised M.S. Tower Bolt Black Finish, ( Barrel Type ) With Necessary Screws Etc. Complete : 37 250X10 Mm 38 Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete : 39 125 Mm 40 Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer ( Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm ) , With Necessary Accessories And Screws Etc. Complete. 41 Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) , Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 42 250X16 Mm 43 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 44 200X10 Mm 45 Providing And Fixing Aluminium Handles, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 46 125 Mm 47 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete. 48 Twin Rubber Stopper 49 Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 50 Providing And Fixing 1Mm Thick M.S. Sheet Door With Frame Of 40X40x6 Mm Angle Iron And 3 Mm M.S. Gusset Plates At The Junctions And Corners, All Necessary Fittings Complete, Including Applying A Priming Coat Of Approved Steel Primer. 51 Using M.S. Angles 40X40x6 Mm For Diagonal Braces 52 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 53 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. 54 Size Of Tile 600X600 Mm 55 Providing And Laying Vitrified Tiles In Different Sizes ( Thickness To Be Specified By Manufacturer ) , With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) , Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. 56 Size Of Tile 600X600 Mm 57 Providing And Fixing Precoated Galvanised Iron Profile Sheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm ( + 0.05 % ) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In- Charge. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Screws Of Size ( 5.5X 55 Mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 58 12 Mm Cement Plaster Of Mix : 59 1:6 ( 1 Cement: 6 Coarse Sand ) 60 Distempering With 1St Quality Acrylic Distemper ( Ready Mixed ) Of Approved Manufacturer, Of Required Shade And Colour Complete, As Per ManufacturerS Specification. 61 Two Or More Coats On New Work 62 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : 63 New Work ( Two Or More Coat Applied @ 1.67 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg / 10 Sqm ) 64 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade : 65 Two Or More Coats On New Work 66 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : 67 Two Or More Coats On New Work 68 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 69 Renewing Glass Panes, With Putty And Nails Wherever Necessary Including Racking Out The Old Putty: 70 Float Glass Panes Of Thickness 4 Mm 71 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 72 Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade: 73 One Or More Coats On Old Work 74 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : 75 One Or More Coats On Old Work 76 Distempering With 1St Quality Acrylic Washable Distemper ( Ready Made ) Of Approved Manufacturer And Of Required Shade And Colour Complete. As Per ManufacturerS Specification. 77 One Or More Coats On Old Work 78 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade: 79 Old Work ( One Or More Coat Applied @ 0.90 Ltr / 10 Sqm ) . 80 Cleaning Of Terrace / Loft Water Storage Tank ( Inside Surface Area ) Upto 2000 Litre Capacity At All Heights With Coconut Brushes, Duster Etc., Removal Of Silt, Rubbish From The Tank And Cleaning The Tank With Fresh Water Disinfecting With Bleaching Powder @ 0.5Gm Per Litre Capacity Of Tank, Including Marking The Date Of Cleaning On The Side Of Tank Body With The Help Of Stencil And Paint And Disposing Of Malba, All Complete As Per Direction Of Engineer-In-Charge. ( The Old Date Already Written On Tank Should Be Removed With Paint Remover Or Black Paint And If Date Is Not Written With The Stencil Or Old Date Is Not Removed Deduction Will Be Made @ Rs. 0.10 Per Litre If During Cleaning Any Gi Fittings Or Ball Cock Is Damaged That Is To Be Repaired By Contractor At His Own Cost And Nothing Extra Will Be Paid On This Account ) 81 Cleaning And Desilting Of Gully Trap Chamber, Including Removal Of Rubbish Mixed With Earth Etc. And Disposal Of Same, All As Per The Direction Of Engineer-In-Charge. 82 Cleaning Of Chocked Sewer Line By Diesel Running Vehicle Mounting Hydraulic Operated High Pressure Suction Cum Jetting Sewer Cleaning Machine Fitted With Pump Having 4000 Litres Suction Capacity And 6000 Litres Water Jetting Tank Capacity Including Skilled Operator, Supervising Engineer Etc. For Cleaning And Partial Desilting Of Manholes And Dechocking Of Sewer Lines. Dechocking And Flushing Of Sewer Line From One Manhole To Another By High Pressure Jetting System Of 2200 Psi For Sewer Line From 150Mm Dia Upto 300Mm Dia For All Depth. 83 Cleaning Of Under Ground Sump, Over Head R.C.C. Tank ( Independent Staging ) Including Disposal Of Slit And Rubbish, All As Per Direction Of Engineer-In-Charge. The Cleaning Shall Consist Following Operations:- ( I ) Tank Shall Be Emptied Of Water By Pumping & Bottom Shall Be Cleaned Of Slit And Other Deposits. ( Ii ) Entire Surface Area Of The Sump Shall Then Scrubbed Thoroughly With Wire Brush Etc. And Pressure Washed With Water. ( Iii ) Chlorination Of Rcc Internal Surface By Liquid Chlorine. ( Iv ) The Treated Surface Shall Be Dried Using Air Jetting And All Loose Particles Shall Be Removal From The Surface. ( V ) Finally The Surface Shall Be Treated With Ultraviolet Radiation Etc. As Per Direction Of Engineer-In-Charge. 84 Disconnecting Damaged Overhead / Terrace Pvc Water Storage Tank Of Any Size From Water Supply Line And Removing From The Terrace Including Shifting At Ground Level As Per Direction Of Engineer-In- Charge. 85 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. 86 For Thickness Of Tiles 10 Mm To 25 Mm 87 Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. 88 Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. 89 Providing And Laying At Or Near Ground Level Factory Made Kerb Stone Of M-25 Grade Cement Concrete In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) , Including Making Joints With Or Without Grooves ( Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5Mm ) , Including Making Drainage Opening Wherever Required Complete Etc. As Per Direction Of Engineer-In-Charge ( Length Of Finished Kerb Edging Shall Be Measured For Payment ) . ( Precast C.C. Kerb Stone Shall Be Approved By Engineer-In-Charge ) . 90 Taking Out Existing Cc Interlocking Paver Blocks From Footpath / Central Verge, Including Removal Of Rubbish Etc., Disposal Of Unserviceable Material To The Dumping Ground, For Which Payment Shall Be Made Separately And Stacking Of Serviceable Material Within 50 Metre Lead As Per Direction Of Engineer-In-Charge. 91 Laying Old Cement Cocrete Interlocking Paver Blocks Of Any Design / Shape Laid In Required Line, Level, Curvature, Colour And Pattern Over And Including 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Fine Sand Etc. All Complete As Per The Direction Of Engineerin- Charge. ( Old Cc Paver Blocks Shall Be Supplied By The Department Free Of Cost ) . 92 Providing And Fixing Water Closet Squatting Pan ( Indian Type W.C. Pan ) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: 93 White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests 94 Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type W.C. Pan ) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) , Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required : 95 W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 96 Providing And Fixing 8 Mm Dia C.P. / S.S. Jet With Flexible Tube Upto 1 Metre Long With S.S. Triangular Plate To Eureopean Type W.C. Of Quality And Make As Approved By Engineer - In - Charge. 97 Providing And Fixing P.V.C. Low Level Flushing Cistern With Manually Controlled Device ( Handle Lever ) Conforming To Is : 7231, With All Fittings And Fixtures Complete. 98 10 Litre Capacity - White 99 Providing And Fixing Toilet Paper Holder : 100 C.P. Brass 101 Providing And Fixing Soil, Waste And Vent Pipes : 102 100 Mm Dia 103 Centrifugally Cast ( Spun ) Iron Socket & Spigot ( S&S ) Pipe As Per Is: 3989 104 Providing And Fixing Soil, Waste And Vent Pipes : 105 75 Mm Diameter : 106 Centrifugally Cast ( Spun ) Iron Socketed Pipe As Per Is: 3989 107 Providing And Fixing M.S. Holder-Bat Clamps Of Approved Design To Sand Cast Iron / Cast Iron ( Spun ) Pipe Embedded In And Including Cement Concrete Blocks 10X10x10 Cm Of 1:2:4 Mix ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) , Including Cost Of Cutting Holes And Making Good The Walls Etc. : 108 For 100 Mm Dia Pipe 109 For 75 Mm Dia Pipe 110 Providing And Fixing Bend Of Required Degree With Access Door, Insertion Rubber Washer 3 Mm Thick, Bolts And Nuts Complete. 111 100 Mm Dia 112 Sand Cast Iron S&S As Per Is - 3989 113 Providing And Fixing Bend Of Required Degree With Access Door, Insertion Rubber Washer 3 Mm Thick, Bolts And Nuts Complete. 114 75 Mm Dia 115 Sand Cast Iron S&S As Per Is- 3989 116 Providing And Fixing Plain Bend Of Required Degree. 117 100 Mm Dia 118 Sand Cast Iron S&S As Per Is : 3989 119 Providing And Fixing Plain Bend Of Required Degree. 120 75 Mm Dia 121 Sand Cast Iron S&S As Per Is - 3989 122 Providing Lead Caulked Joints To Sand Cast Iron / Centrifugally Cast ( Spun ) Iron Pipes And Fittings Of Diameter : 123 100 Mm 124 75 Mm 125 Providing And Fixing Ptmt Liquid Soap Container 109 Mm Wide, 125 Mm High And 112 Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour, Weighing Not Less Than 105 Gms. 126 Providing And Fixing Ptmt Towel Ring Trapezoidal Shape 215 Mm Long, 200 Mm Wide With Minimum Distances Of 37 Mm From Wall Face With Concealed Fittings Arrangement Of Approved Quality And Colour, Weighing Not Less Than 88 Gms. 127 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fittings Arrangement Of Approved Quality And Colour. 128 450 Mm Long Towel Rail With Total Length Of 495 Mm, 78 Mm Wide And Effective Height Of 88 Mm, Weighing Not Less Than 170 Gms 129 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge.Internal Work - Exposed On Wall 130 15 Mm Nominal Outer Dia Pipes 131 20 Mm Nominal Outer Dia Pipes 132 25 Mm Nominal Outer Dia Pipes 133 Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I / C Cutting And Making Good The Walls Etc. 134 15 Mm Dia Nominal Bore 135 20 Mm Dia Nominal Bore 136 Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete ( New Work ) : 137 15 Mm Nominal Bore 138 20 Mm Nominal Bore 139 Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank, Is : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. 140 Circular Tank 141 Providing And Laying Non-Pressure Np2 Class ( Light Duty ) R.C.C. Pipes With Collars Jointed With Stiff Mixture Of Cement Mortar In The Proportion Of 1:2 ( 1 Cement : 2 Fine Sand ) Including Testing Of Joints Etc. Complete : 142 300 Mm Dia. R.C.C. Pipe 143 Constructing Brick Masonry Circular Type Manhole 0.91 M Internal Dia At Bottom And 0.56M Dia At Top In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Inside Cement Plaster 12 Mm Thick With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) Finished With A Floating Coat Of Neat Cement, Foundation Concrete 1:3:6 Mix ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 40 Mm Nominal Size ) , And Making Necessary Channel In Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) Finished With A Floating Coat Of Neat Cement, All Complete As Per Standard Design : 144 0.91 M Deep With Sfrc Cover And Frame ( Heavy Duty, Hd- 20 Grade Designation ) 560 Mm Internal Diameter Conforming To I.S. 12592, Total Weight Of Cover And Frame To Be Not Less Than 182 Kg., Fixed In Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) Including Centering, Shuttering All Complete. ( Excavation, Foot Rests And 12Mm Thick Cement Plaster At The External Surface Shall Be Paid For Separately ) : 145 With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 146 Providing And Fixing In Position Pre-Cast R.C.C. Manhole Cover And Frame Of Required Shape And Approved Quality 147 L D- 2.5 148 Rectangular Shape 600X450 Mm Internal Dimensions 149 Providing And Fixing In Position Pre-Cast R.C.C. Manhole Cover And Frame Of Required Shape And Approved Quality 150 H D - 20 151 Circular Shape 560 Mm Internal Diameter 152 Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is : 6315, Having Brand Logo Embossed On The Body / Plate With Double Spring Mechanism And Door Weight Upto 125 Kg, For Doors, Including Cost Of Cutting Floors, Embedding In Floors As Required And Making Good The Same Matching To The Existing Floor Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Engineer-In-Charge. 153 With Brass Cover Plate Minimum 1.25 Mm Thickness 154 Granite Work Gang Saw Cut ( Polished And Machine Cut ) Of Thickness 18 Mm For Wall Lining ( Veneer Work ) , Backing Filled Witha Grout Of Average 12 Mm Thick In Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) , Including Pointing With White Cement Mortar 1:2 ( 1 White Cement : 2 Marble Dust ) With An Admixture Of Pigment To Match The Marble Shade. 155 Cleaning Of Open Surface Drain I / C Desilting Removing Of Cover & Refixing After Cleaning.Dewatering, Desilting And Disposal Of Malba To The Approved Municipal Dumping Ground Of Darin Covers And Replacing The Drain Covers On The Drain After The Cleaning As Per Direction Of Engineer In Charge. 156 Carrying Out Of Welding Work By Imposing The Labour And Necessary Equipment For Welding ( Welding Machine, Welding Rod, Cutting Wheels And Required Material If Required ) Including Necessary Finishing Al Complete As Per Direction Of Engineer-In-Charge. 157 Cleaning Of Manholes After Removing Of Cover & Refixing After Cleaning I / C Dewatering And Disposal Of Malba / Sludge All Lead And Lift By Mechanical Transport To The Approved Municipal Dumping Ground I / C Taking All Precautions As Per The Direction Of Engineer-In-Charge. ( A ) Circular & Rectangular All Size Manhole Depth A ) Upto 2.00 M Deep. 158 Cleaning Of Road Gully Chamber After Removing Of Cover & Refixing After Cleaning I / C Desilting And Disposal Of Malba / Sludge All Leadand Lift By Mechanical Transport To The Approved Municipal Dumping Groundi / C Taking All Precaution As Per The Direction Of Engineer In Charge . 159 Providing And Fixing Polycarbonate Sheets 2.85 Mm Thick Uv Coating Non Breakable In Window Shutters With Ms Beading Of Size 15X3 Mm Fixed With Welding Or Nut Bolt Where Ever Required At All Floor Levels All Complete As Per Direction Of Engineer - In - Charge. 160 Providing And Fixing Ss Patch Lock For Glass Swing Door Of Ozne Make Cat No. Dlp-1E With Necessary Screws Etc. Complete As Per Direction Of Engineer - In - Charge. 161 Providing And Fixing Stainless Steel Glass Door Handle H Type Of Ozne Make Cat No. Ogh-55E With Necessary Screws Etc. Complete As Per Direction Of Engineer-In-Charge. 162 Providing And Fixing C.P. Brass Pillar Cock Of Approved Quality Conforming To Is:8931 : 163 15 Mm Nominal Bore 164 Providing And Fixing Roller Blinds Of Approved Brand And Manufacturer ( Make : Vista, Hunter Douglas & D Decor ) Of Any Colour And Shade At Required Locations Including All Necessary Fixtures Etc. Complete As Perdirection Of Engineer-In- Charge. 165 Providing And Fixing Hard Drawn Steel Wire Fabric 75X25 Mm Mesh Of Weight Not Less Than 7.75 Kg Per Sqm Including Welding And Priming Coat With Approved Steel Primer All Complete. 166 Supplying & Stacking At Site G.I. Pipes 15 Mm Dia As Per Approved And Direction By Engineer-In-Charge. 167 Supplying & Stacking At Site G.I. Pipes 20 Mm Dia As Per Approved And Direction By Engineer-In-Charge. 168 Supplying & Stacking At Site G.I. Pipes 25 Mm Dia As Per Approved And Direction By Engineer-In-Charge. 169 Supplying & Stacking At Site G.I. Pipes 32 Mm Dia As Per Approved And Direction By Engineer-In-Charge. 170 Supplying & Stacking At Site G.I. Pipes 40 Mm Dia As Per Approved And Direction By Engineer-In-Charge. 171 Supplying & Stacking At Site Ptmt Ball Cock 15Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 172 Supplying And Stacking At Site Vitreous China Flat Back Wash Basin 630X450 Mm Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 173 Supplying And Stacking At Site C.I. Bracket For Wash Basin And Sinks Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 174 Supplying And Stacking At Site Flushing Cistern P.V.C. 10 Litre Capacity ( Low Level ) ( White ) ( With Fittings, Accessories And Flush Pipe ) Complete Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 175 Supplying And Stacking At Site White Vitreous China Pedestal Type Water Closet ( European Type / Wash Down Type ) Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 176 Supplying And Stacking At Site Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings Of Approved Brand And Manufacture Direction By Engineer-In-Charge. 177 Supplying & Stacking At Site Ptmt - Waste Coupling 31 / 32 Mm As Per Approved And Direction By Engineer-In-Charge. 178 Supplying & Stacking At Site 15 Mm Nominal Bore And 45 Cm Length Pvc Connection Pipe With P.T.M.T. Nuts As Per Approved And Direction By Engineer-In-Charge. 179 Supplying & Stacking At Site Stainless Steel Kitchen Sink - Without Drain Board 610X510 Mm Bowl Depth 200 Mm Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 180 Supplying & Stacking At Site 20 Mm Dia Gunmetal Gate Valve With Wheel Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 181 Supplying & Stacking At Site C.P. Brass Bibcock 15 Mm Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 182 Supplying & Stacking At Site 15 Mm Ptmt Bib Cock Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 183 Supplying & Stacking At Site Ptmt Pillar Cock Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 184 Supplying & Stacking At Site Brass Stop-Cock 15 Mm Dia Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 185 Supplying & Stacking At Site 15 Mm Dia Ptmt Stop Cock ( Male Thread ) Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 186 Supplying & Stacking At Site C.P. Brass Angle Valve 15 Mm Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 187 Supplying & Stacking At Site Ptmt Angle Stop Cock With Flange 15 Mm Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 188 Supplying & Stacking At Site Rectangular Shape 453X357 Mm Mirror With Plastic Moulded Frame Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 189 Supplying & Stacking At Site Float Glass Sheet Of Nominal Thickness 4 Mm ( Weight Not Less Than 10 Kg / Sqm ) Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 190 Supplying & Stacking At Site Coarse Sand ( Zone Iii ) Of Approved Brand And Manufacture As Per Approved And Direction By Engineer-In-Charge. 191 Supplying & Stacking At Site Portland Cement ( Opc-43 Grade ) As Per Approved And Direction By Engineer-In-Charge. 192 Supplying & Stacking At Site White Cement As Per Approved And Direction By Engineer-In- Charge. 193 Supplying & Stacking At Site Galvanised Wire Mesh Of Average Width Of Aperture 1.4 Mm And Nominal Dia Of Wire 0.63 Mm As Per Approved And Direction By Engineer-In- Charge. 194 Supplying & Stacking At Site Aluminium Sliding Door Bolts, Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) , Transparent Or Dyed To Required Colour Or Shade As Per Approved And Direction By Engineer-In- Charge. 195 300X16 Mm 196 250X16 Mm 197 Supplying & Stacking At Site Aluminium Tower Bolts, Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) , Transparent Or Dyed To Required Colour Or Shade As Per Approved And Direction By Engineer-In- Charge. 198 250X10 Mm 199 200X10 Mm 200 150X10 Mm 201 Supplying & Stacking At Site Aluminium Hanging Floor Door Stopper, Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) , Transparent Or Dyed To Required Colour Or Shade As Per Approved And Direction By Engineer-In- Charge. 202 Twin Rubber Stopper 203 Supplying & Stacking At Site Aluminium Handles, Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) , Transparent Or Dyed To Required Colour Or Shade As Per Approved And Direction By Engineer-In- Charge. 204 125 Mm 205 100 Mm 206 Provide / Deploye A Sewerman For Attending Various Sewerman Related Complaints Such As Opening And Cleaning Of Choked Sewer, Drain, Manhole, Gully Traps, Road Gully Chamber, Water Closet, Floor Traps, Wash-Basin, Kitchen Sinks Including The Vertical Stricks, Rain Water Pipe Etc., Cleaning With Acid / Biodegradable Chemical / Detergent Whenever Required As Per Satisfaction Of Occupants And Including Disposing Of Silts / Malba / Waste Garbage Etc.Complete As Per Directions Of Engineer-In-Charge. All Work Is To Be Attended During 09:00 A.M To 06:00 P.M Daily I / C Holidays ( Except Sunday ) For A Month By Sewerman In Proper Uniform Shall Be Treated A One Job Per Month. Necessary T&P Shall Be Provided By The Contractor. 207 Provide / Deploye A Plumber / Fitter For Attending Various Plumber / Fitter Related Complaints Like Fixing Of Water Supply Related Fittings, Sanitory Related Pipes And Fittings, Flush Valves, Stop Cock, Bib Cock, Waste Pipes, Flush Pipes, Cistern, Wc Oans, Mixer Of All Kinds Showers And All Other Such Fittings Etc.Complete As Per Directions Of Engineer-In-Charge. All Work Is To Be Attended During 09:00 A.M To 06:00 P.M Daily I / C Holidays ( Except Sunday ) For A Month By Plumber / Fitter In Proper Uniform Shall Be Treated A One Job Per Month. Necessary T&P Shall Be Provided By The Contractor 208 Provide / Deploye A Carpenter For Attending Various Carpenter Related Complaints Like Adjusting Door Closer, Easing Out Of Doors / Windows / Ventillators, Fixing Of Fittings & Fixtures Of Doors / Windows / Ventillators And Repairs Of Wooden Partitions, Doors, Windowsetc.Complete As Per Directions Of Engineer-In-Charge. All Work Is To Be Attended During 09:00 A.M To 06:00 P.M Daily I / C Holidays ( Except Sunday ) For A Month By Carpenter In Proper Uniform Shall Be Treated A One Job Per Month. Necessary T&P Shall Be Provided By The Contractor 209 Provide / Deploye A Supervisor Cum Office Attendant For Attending Services Of Supervisor Cum Office Attendant For Writing Maintenance Complaints, Issue Of Required Materials To The Skilled Labours For Attending Complaints Including Assigning Various Works In The Complaint Daily And Supervise Them At Site Etc.Complete As Per Directions Of Engineer-In-Charge. All Work Is To Be Attended During 09:00 A.M To 06:00 P.M Daily I / C Holidays ( Except Sunday ) For A Month By Supervisor Cum Office Attendantin Proper Uniform Shall Be Treated A One Job Per Month. Necessary T&P Shall Be Provided By The Contractor 210 Provide / Deploye A Helper / Beldar For Attending Various Complaints Like Upkeeping And Maintenance Of Various Premises And Helping ( Helper / Beldar ) To Skilled Manpower Whenever Needed And Cleaning The Outlets Of Rain Wateretc.Complete As Per Directions Of Engineer-In-Charge. All Work Is To Be Attended During 09:00 A.M To 06:00 P.M Daily I / C Holidays ( Except Sunday ) For A Month By Beldar In Proper Uniform Shall Be Treated A One Job Per Month. Necessary T&P Shall Be Provided By The Contractor 211 Provide / Deploye A Mason For Attending Various Mason Related Complaints Like Repairing Of Floors, Walls, Plaster, Ceiling, Grading On Roof, Brick Edging, Making Repairs Of Holes Thereof, Masonry Jobs In Laying Of Pipes, Wc Pans Adjusting Door Closer, Easing Out Of Doors / Windows / Ventillators, Fixing Of Fittings & Fixtures Of Doors / Windows / Ventillators And Repairs Of Wooden Partitions, Doors, Windowsetc.Complete As Per Directions Of Engineer-In-Charge. All Work Is To Be Attended During 09:00 A.M To 06:00 P.M Daily I / C Holidays ( Except Sunday ) For A Month By Mason In Proper Uniform Shall Be Treated A One Job Per Month. Necessary T&P Shall Be Provided By The Contractor. 212 Making Payment For Providing Bonus To Workers & Staff Engaged At Service Centre / Office As Per Govt. Policy ( One Unit Includes Payment Of Bonus To One Workers / Staff Engaged At Service Centre / Office For One Month ) 213 Plumber, Supervisor, Carpenter & Mason 214 Making Payment For Providing Bonus To Workers & Staff Engaged At Service Centre / Office As Per Govt. Policy ( One Unit Includes Payment Of Bonus To One Workers / Staff Engaged At Service Centre / Office For One Month ) 215 Sewarman 216 Making Payment For Providing Bonus To Workers & Staff Engaged At Service Centre / Office As Per Govt. Policy ( One Unit Includes Payment Of Bonus To One Workers / Staff Engaged At Service Centre / Office For One Month ) 217 Beldar 218 Making Payment For Providing Uniform ( One Set Of Unifrom Incudes Shirt, Pant And Top Cover With Pwd Logo ) & Id Card To Workers & Staff Engaged At Services Centre As Per Approved Fabric / Approved Colour / Approved Brand And As Per Direction Of Enginner In Charge. ( One Set Of Uniform To Be Given At The Time Of Start Of Work To Every Worker / Staff And At The Time Of Engagement Of New Worker / Staff If Engaged By Contractor As Per Direction Of Engineer In Charge ( 2 ) Again One Set Of Uniform To Be Given After Six Month Of Date Of Start Of Work To Every Worker / Staff ) . ( Without Uniform & Id Card No Worker Will Be Allowed To Enter At Service Centre / Work Place ) 219 Credit And Disposal Of Old Damaged And Dismantled Pvc Tank Ad Other Plastic And Pvc Articles ( The Material Will Be The Property Of Contractor ) Note: Actual Weight Of The Material To Be Measured For Payment. 220 Credit And Disposal Of Old Damaged And Dismantled C.P Brass Fittings And Other Brass Articles ( The Material Will Be The Property Of Contractor ) Note: Actual Weight Of The Material To Be Measured For Payment. 221 Credit And Disposal Of Old Damaged And Dismantled Steel / Iron / M.S / G.I And Other Similar Articles ( The Material Will Be The Property Of Contractor ) Note: Actual Weight Of The Material To Be Measured For Payment. 222 Credit And Disposal Of Old Damaged And Dismantled Wooden / Particle Board / Block Board / Ply And Other Similar Articles ( The Material Will Be The Property Of Contractor ) Note: Actual Weight Of The Material To Be Measured For Payment. 223 Credit And Disposal Of Old Damaged And Dismantled Aluminium Article Like Fittings And Aluminium Sections And Other Similar Articles ( The Material Will Be The Property Of Contractor ) Note: Actual Weight Of The Material To Be Measured For Payment. 224 Credit And Disposal Of Old Damaged And Dismantled Stainless Steel Articles ( The Material Will Be The Property Of Contractor ) Note: Actual Weight Of The Material To Be Measured For Payment. 225 Add Cost Index @ 21.46% On Dsr Item 1 To 78 On Rs.25, 84, 973 / - 226 Less @9.50% On Rs.31, 39, 708 / -
