Procurement Of Gas Chromatograph Equipment – Gas Chromatograph Apparatus Column Oven of approximately 12-15 liters. System should have Multichannel & Multifunction control with accuracy and ease of operation Method / Program can be developed, stor, amethi-Uttar Pradesh

Procurement Of Gas Chromatograph Equipment – Gas Chromatograph Apparatus Column Oven of approximately 12-15 liters. System should have Multichannel & Multifunction control with accuracy and ease of operation Method / Program can be developed, stored, recalled and run with simple keyboard operation Column Oven Temperature Ambient upto 400C No. of Ramps should be at least 20. Programme Rates: 0 to 50 deg C/min. in steps 0.1 deg C steps. Facility for the storage of at least 20 method files. Should be retained in memory when Mains is switched off. Event controls, Auto diagnostics and suitable interface for Data Communication should be provided. Six Way Temp. Control System (Oven, Inj, Det, TCD, Aux1, Aux2). Injector system should consist of a SS body which fits into a universal base and accepts Removable Glass insert. Injector Ports (Dual) i.e., Packed and Capillary, 1 each Fast Heating and Cooling Speed by Unique Double Air Flow Cold Hot alternate system. Large Screen with Backlight Lattice to show all parameters with user friendly key Board design. Must have simultaneous display of Set & Actual Temp. Live Graph on Display of GC Pressure and Flow display. All SS Diaphragm Regulators Built in Auto Program Start system. Unique Pulse Triggering Control system that Resists electromagnetic Interference Enormously. Over Heat Protection for all the 6 heated Zones. Standard Valves for Packed Columns. System should have latest Electronics and Programs. High Sensitivity for testing of Mixing at Ultra Low/Trace Levels. Intelligent breakdown self-checking and alarm function. Carrier Gas cut off Protection facility 1. Detectors Flame Ionization Detector (FID) with excellent sensitivity and wide linear dynamic range. It should have a suitable or quartz jet permitting use of total all glass separation system and minimizes degradation and absorption of samples. Sensitivity Better than 2 x 10-12 g/sec, Linearity 107 . There should be Separate Hydrogen line for dual FID. Thermal conductivity Detector (TCD). Should have Dual Path, Tungsten Rhenium 4 filaments and should work in Dual Column mode. 2. Recording Device

Refer document

Refer document

Refer document