Rate Contract For Composite Works ( Mechanical And Electrical Works ) For Developement Of Different Type Of Cng Stations At Various Geographical Areas In The States Of Bihar Jharkhand Madhya Pradesh Tamilnadu Andhra Pradesh And Telangana ( Group- B ) - 3 Laying, Testing And Commissioning Of Ss Tubes Along With Fittings As Per Technical Specification, Typical P & Id For Type Of Cng Station And Scope Of Work, Handling, Lifting, Transportation From Stores Tocng Stations. 4 ¾”Od X 0.095” Min Wall Thk.Ss Tube ( Referts Section Iii - A ) 5 ½”Od X 0.083” Min Wall Thk.Ss Tube ( Referts Section Iii - A ) 6 Supply Of Ss Tubes As Per Technical Specification 7 ¾”Od X 0.095” Min Wall Thk., Material Ss316ss Tube ( Referts Section Iii - A ) 8 ½”Od X 0.083” Min Wall Thk., Material Ss316 Ss Tube ( Referts Section Iii - A ) 9 Supply Of Ss Fittings, Valves 10 Quick Connect Body & Stem 11 Qrc Of 3 / 8 Npt , End Connection:½ Tube Od, For Stem & ½”Npt ( F ) For Body Materialss316; Rated Pressure : 5000 Psi @ 70°F Temperature: 0°F To 400°F 12 Plug 13 Size : ½ Od, Material : Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 14 Size : ¾ Od, Material : Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 15 Caps 16 Size : ½ Od, Material : Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 17 Size : ¾ Od, Material : Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 18 Union 19 Size : ¾” Od, Material : Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 20 Size : ½ Od, Material : Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 21 Reducing Union 22 Tube Od 3 / 4 X Tube Od 1 / 2, Material : Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 23 Equal Tee 24 Size:½” Od X ½” Od X ½” Od, Material:Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 25 Size:¾ Od X ¾ Od X ¾ Od, Material : Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 26 Reducing Union Tee 27 ¾ Od X ½ Od X ¾ Od, Material : Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 28 Tube End Connection 29 ½” Tube End & ¾” Od With Ferrule Fitting, Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 30 Nut 31 ¾ Od, Material : Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 32 ½ Od, Material : Ss316 ( Rated Pressure : 6000 Psi @ 70°F Temperature : 0°F To 400°F ) 33 Front Ferrule 34 3 / 4 Od, Material : Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 35 ½ Od, Material : Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 36 Back Ferrule 37 3 / 4 Od, Material : Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 38 ½ Od, Material : Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 39 Male Connector 40 Size ¼” Npt ( M ) X 3 / 8” Od, Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 41 Size 1 / 2” Npt ( M ) X 3 / 8” Od, Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 42 Cross 43 3 / 4 Od X 3 / 4”X 3 / 4 Od X3 / 4 Od Material : Ss316 ( Rated Pressure : 5000 Psi @ 70°F Temperature : 0°F To 400°F ) 44 Ss Ball Valves, Conforming To Mecon’S Technical Specification No. Mec / Ts / 05 / 62 / 048 For Ss Ball Valves Of Following Sizes, Specifications As Indicated Below : 45 2-Way Floating Normal Bore Ball Valve ¾ 46 2-Way Floating Normal Bore Ball Valve ½ 47 3-Way Trunnion Mounted, Reducer Boreball Valve ½ Od End Connection And ¼” Npt ( F ) Bottom End Connection 48 Conductive Core Thermoplastic Hose 49 3 / 8” Id Conductive Core Thermoplastic Hose For Cng Service With Break Away Coupling ( 3 Meter ) 50 Supply , Laying, Testing And Commissioning Of Ss 304 Tubes Along With Isolation Valves, Reducers & Fittings Etc.As Per Technical Specification, Typical Schematic Drg. For Ins. Air Line Of Cng Station And Scope Of Workincluding Handling, Storage, Lifting, Transportation Upto Cng Stations. ( Note:Total No.Offerrule Fittings May Be Considered As One Jointing Ferrule At Every 5.0 M ) 51 1 / 4”Od X 0.035” Min Wall Thk.Ss Tube ( Referts Section Iii - A ) 52 Section-B : Erection Of Mech. Equipment 53 Handling ( Including Lifting And Transportation From ClientS Store Within City Tocng Stations ) And Erecting In Position, The Following Equipmenteither On The Foundation At Ground Level Or On Roof At 3.5 M Above Ground Level.ContractorS Scope Shall Include Supply Of All Material And Accessories Including But Not Limited To Any Fixtures, Clamps, Gasket, Nut Bolts, Etc. : 54 Cascade 4500 / 3000 L Water Capacity. Erection At + 4.0 M Level ( Referts Section Iii - B ) 55 Cascade 4500 / 3000 L Water Capacity, Erection At + Ground Level ( Refer Ts Section Iii - B ) 56 Dispenser Erection At + Ground Level 57 Note:The Quantities Given Above Against Individual Items Are Indicative And Shall Not Be Considered To Be Binding.The Quantities May Increase Or Decrease At Site At The Time Of Actual Execution And As Per The Discretion Of Owner / Engineer-In-Charge.The Unit Rate Shall Be Operated To Work Out The Final Payment Due To Contractor. 58 Section-B.1 : Erection Of Mech. Equipment ( Transportation Not Required ) 59 Handling ( Including Lifting Within Cng Stations ) And Erecting In Position, The Following Equipmenteither On The Foundation At Ground Level Or On Roof At 3.5 M Above Ground Level.ContractorS Scope Shall Include Supply Of All Material And Accessories Including But Not Limited To Any Fixtures, Clamps, Gasket, Nut Bolts, Etc. : 60 Cascade 4500 / 3000 L Water Capacity. Erection At + 4.0 M Level ( Referts Section Iii - B ) 61 Cascade 4500 / 3000 L Water Capacity, Erection At + Ground Level ( Refer Ts Section Iii - B ) 62 Dispenser Erection At + Ground Level 63 Note:The Quantities Given Above Against Individual Items Are Indicative And Shall Not Be Considered To Be Binding.The Quantities May Increase Or Decrease At Site At The Time Of Actual Execution And As Per The Discretion Of Owner / Engineer-In-Charge.The Unit Rate Shall Be Operated To Work Out The Final Payment Due To Contractor. 64 Section-C : Supply, Erection & Commissioning Of Miscellaneous Item 65 Supply, Erection & Commissioning Of Following Miscellaneous Items As Per Technical Specification And At Locations ( Within The Stations ) As Directed By Eic 66 Fire Fighting Equipments ( Referts Section Iii - C ) 67 Dcp -10 Kg 68 Dcp -75 Kg ( Trolley Mounted ) 69 Co2 – 4.5 Kg ( Portable ) 70 Sand Bucket With Stand And Canopy ( 4 Nos. On Each Stand ) 71 Wind Socks 72 Section-D : Supply And Installation Of Aboveground Steel Piping At Cng Stations. 73 Supply Of Assorted Pipe, Fittings And Flanges 74 Complete Work Of Supply Of Pipes, Flanges And Fittings Including All Taxes, Duties, Transportation And Inspection Charges But Not Limited To, The Following Itemsin Accordance With Pms ( Piping Material Specification ) , Relevant Specifications & Drawings Indicated In Scope Of Work Indicated In Scc And Instructions Of Engineer-In-Charge And As Per All Provisions Of The Contract Document. 75 Handling Including Lifting, Transportation From Contractor Stores To ContractorS Workshop For Fabrication And / Or To Work Site For Field Fabrication And Erection For All Piping Items Supplied By Contractor. 76 Carbon Steel Pipe 77 Size Rating / Schedule 78 4 Nb, Be ( Astm A106, Gr. B ( Charpy ) , Seamless, Be ) S80 79 2 Nb, Be ( Astm A106, Gr. B ( Charpy ) , Seamless, Be ) Xs Xs 80 1 Nb, Be ( Astm A106, Gr. B, Seamless, Pe ) Xsxs 81 3 / 4 Nb, Be ( Astm A106, Gr. B, Seamless, Pe ) S160xs 82 Flanges 83 Weld Neck ( B-16.5, A105 ( Charpy ) , 125 Aarh, Rf ) ( End Thickness To Match Pipe Thickness ) 84 Sizerating / Schedule 85 4 Nb, Rf 300# 86 2 Nb, Rf 300# 87 Socket Welded ( B-16.5, A105, 125 Aarh, Sw End To B16.5 ) 88 1Nb, Rf 300# 89 3 / 4 Nb Rf300# 90 Blind Flanges ( B-16.5, A105 ( Charpy ) , 125 Aarh, Rf ) 91 Size Rating / Schedule 92 4 Nb, Rf 300# 93 2 Nb, Rf 300# 94 Blind Flanges ( B-16.5, A105, 125 Aarh, Rf ) 95 1Nb, Rf 300# 96 3 / 4 Nb Rf300# 97 Elbow 98 Elbow, 90° Elbow ( A234, Gr. Wpb ( Charpy ) , B-16.9, 1.5D ) , Bw 99 Size Rating / Schedule 100 4 Nb S80 101 2 Nbxs 102 Elbow, 45° Elbow ( A234, Gr. Wpb ( Charpy ) , B-16.9, 1.5D ) , Bw 103 Size Rating / Schedule 104 4 Nb S80 105 2 Nbxs 106 Tees ( Seamless ) 107 Tee, Equal / Reducing Tee ( A234, Gr. Wpb ( Charpy ) , B-16.9, 1.5D ) , Bw 108 Size Rating / Schedule 109 4Nb S80 110 2Nb Xs 111 4X 2Nbs80 X Xs 112 Sockolet ( A105 ) , Sw, 6000#, Mss-Sp 97 113 Sizerating / Schedule 114 4 X 1Nbs40 X Xs 115 4 X ¾ Nbs40 X S160 116 2 X 1Nb Xs X Xs 117 2 X ¾ Nbxs X S160 118 End Caps ( A 234 Gr. Wpb ( Charpy ) , Bw ) 119 Sizerating / Schedule 120 4 Nbs80 121 Reducer ( A234 Gr. Wpb, B.16.9 ) 122 Sizerating / Schedule 123 4 Nb X 2 Nbs80 X Xs 124 Note:I ) The Quantities Mentioned Above Are Tentative.Ii ) For All The Supply Items Mentioned Above, Procurement Shall Be Made As Per Specification After Due Approval Of Engineer-In-Charge. 125 Supply Of Valves 126 Complete Work Of Supplyof Valves Including All Taxes, Duties, Transportation And Inspection Charges But Not Limited To , The Following Items In Accordance With Relevant Specifications & Relevant Data Sheets Indicated Inscope Of Work Indicated In Scc, Drawings, Specification And Instructions Of Eic And As Perall Provisions Of The Contract Document. 127 Flanged / Welded Valves ( Full Bore / Reduced Bore ) 128 Plug Valves 129 Bw 130 Sizerating / Schedule 131 2 Nbbw 300# 132 Ball 133 Sizerating / Schedule 134 4 Nbbw , Fb300# 135 2 Nbbw , Fb300# 136 2 Nbfe , Fb300# 137 Sockolet Welded Valve ( Ball Valve ) 138 Sizerating / Schedule 139 1 Nb Sw, Fb 800# 140 ¾ Nbsw, Fb 800# 141 Complete Carbon Steel Aboveground Piping Work With Painting Including All Fittings, Flanges And Supply Of All Required Gaskets, Vent Flappers, Studs Bolts & Nuts Etc. As Described Under Item 1.0 Above 142 Carbon Steel Pipe ( A 106, Gr. B, Seamless, B-36.10 ) 143 Size Rating / Schedule 144 4 Nb, Be ( Astm A106, Gr. B ( Charpy ) , Seamless, Be ) S80 145 2 Nb, Be ( Astm A106, Gr. B ( Charpy ) , Seamless, Be ) Xsxs 146 1 Nb, Be ( Astm A106, Gr. B , Seamless, Pe ) Xsxs 147 3 / 4 Nb, Be ( Astm A106, Gr. B, Seamless, Pe ) S160xs 148 Note:1 ) Pipe Specification And Thickness May Vary Depending Upon Availability Of Pipe.No Extra Payment Shall Be Made For This.2 ) All Butt Welded Fittings End Shall Generally Match With Connecting Pipe Wall Thickness. However, In Case Of Misalignment, Contractor Shall Have To Do End Preparation Without Any Extra Cost. 3 ) All Coupling, Nipples Stud, Bolts, Nuts, Gaskets And Vent Flapper Etc. As Required Shall Be Suplied By Contractor But No Separate Payments Shall Be Made As It Is Covered Under Erection Rate. 149 Radiography 150 Performance Of Radiographic Inspection By Gamma Radiation As Per Scope Of Work And As Per Specifications In Piping Of All Types And Thickness Including Providing / Hiring Of All Necessary Equipments, Supply Of All Consumables, And Whatever Else Even Though Not Expressely Mentioned But Required To Perform The Work As Per Specifications And Instructions Of Engineer-In-Charge ( Full Circle Re-Radiography Of The Repaired Joint And Additional Radiography Necessitated Due To Poor Performance Of ContractorS Welder Shall Be Carried Out By The Contractor At His Own Cost And Shall Not Be Paid Extra By Company ) .Radiographs Shall Be Submitted To The Engineer-In-Charge For Acceptance, Whose Decision Shall Be Final And Binding. 151 Size 152 4 Nb 153 2 Nb 154 Note:I ) The Quantities Mentioned Above Are Tentative. 155 Aboveground Erection Of Valves 156 Handling Including Lifting And Transportation From CompanyS Warehouse To ContractorS Stores And / Or Work Site And Installation Of All Types Of Valves, Insulating Joint, Flow Tee Including Assembly Of Valve Accessories, ( If Any ) By Bolting, Threading Or Welding, Supply And Insertion Of Gaskets, Nuts & Bolts, Nipples, Etc. At All Elevations Of Pipe Sleepers, Supports Or Overhead On Racks, Equipments Nozzle, Skid & Painting Etc. Supply Of All Consumables, Manpower, Equipment, Etc. For Completion Of All Works As Per Scope Of Work And As Per Drawings, Specifications And Instructions Of Engineer-In-Charge Including Servicing / Cleaning Of Valve Wherever Requried. 157 Flanged / Welded Valves ( Full Bore / Reduced Bore ) 158 Plug Valves 159 Bw 160 Sizerating / Schedule 161 2 Nbbw 300# 162 Ball 163 Sizerating / Schedule 164 4 Nbbw , Fb300# 165 2 Nbbw , Fb300# 166 2 Nbfe , Fb300# 167 Sockolet Welded Valve ( Ball Valve ) 168 Sizerating / Schedule 169 1 Nb Sw, Fb 800# 170 ¾ Nbsw, Fb 800# 171 Pressure Gauges 172 Supply, Installation And Calibration Of Pressure Gauges And Their Accessories Inclusive Of Supply Of Necessary Piping Materials / Tubings Alongwith All Necessary Valves & Fittings, Fabrication And Installation Of Impulse Lines / Manifolds As Per D. S. No. Mec / 23H7 / 05 / E5 / I / 001 / Ds-Pg. 173 Structural Works 174 Pipe Supports & Other Structures 175 Supply, Fabrication And Erection Of All Types Of Pipe Supports Like Clamps, Saddle, Guide Stops, Cradles, Turn Buckles, Anchors, T-Posts; Stockade / Trestle And Pipe Bridge For Overhead Piping; Frames For Canopy, Approach Ladders And Platforms, Crossover, Cable Tray Supports, Etc. Including Painting Suitable For Highly Corrosive Area As Per Specificationlabour And Supervision & Complete Work As Per Drawings, Specifications And Instruction Of Engineer-In-Charge. ( Bolts, Nuts, Washers, Pvc Coated U-Clamps Etc. For Supporting Shall Be Supplied By The Contractor Within The Rates Quoted.These Items Will Not Be Measured And Paid Seperately ) .The Work Is To Be Completed In All Respect As Per Scope Of Work And Specification. 176 Notes: 177 The Quantities Indicated Above Are Tentative Estimated Values And Hence Are Approximate. Final Payment Will Be Made Based On Actual Quantities To Be Certified By The Owner / Owner Representative. 178 The Cost Of Ms Bolts ( Permanent And Service ( , Washers, Electrodes, Putty, Gases, Cost Of Straightening The Raw Materials, Cutting Of Flats From Plates And Providing Splices, Paints, Tools, Plants Etc., As Required For The Work Shall Be Deemed To Be Included In The Quoted Rates. 179 All Handling And Transport Charges Of Raw Materials And Fabricated Structures Including Double Handling, As Required, For Completion Of Work In Accrodance With Time Schedule, Are Deemed Be Included In The Quoted Rates. 180 Plain Cement Concrete 181 Providing, Laying In Position, Construction And Handing Over Of Pcc In All Types Of Concrete Works Including Levelling Courses Below Foundations, Mass Concrete Works, Chambers, Cable Trench, Under Floors And Any Other Locations ( Which Are Not Covered As Part Of Respective Items Of Sor ) , At All Levels And Locationsetc Complete In All Respects As Per Scope Of Work, Detailed Construction Drawings, Technical Specifications And Direction Of Engineer-In-Charge. 182 A ) Pcc M-15 ( 1:2:4 ) [ 1 Cement: 2 Coarse Sand : 4 Stone Aggregate 20 Mm Nominal Size ] 183 Note: 184 1. Rate To Include Cost Of All Labour, Tools, Tackles, Equipment, Hire Charges, Supply Of All Materials Such As Minimum 43 Grade Cement, Coarse Sand And Coarse Aggregates, Other Minor Construction Materials, Shuttering, Staging, Shoring / Strutting, Finishing, Etc. With All Bye Works And Sundry Works. 185 2. To Be Read In Conjunction With Relevent Clause Of Pjs. 186 Conversion Of Dbs To Online / Mother Station 187 Decommissioning Of Ss Tubing, Dismentalling Of Ss Tubing, Providing Connections With Online Compressor / Cascade / Dispenser As Required Including Installation Of Fittings & Relacement Of Damaged Fittings ( Supply To Be As Per Relevant Sor Item ) , Retesting Of Already Laid Tubings, Installation Of Valves ( Supply As Per Relevant Sor ) , Providing As Build P&Id Drawings, Etc.Completing All Tubing / Mechanical Work To Complete The Conversion Of Dbs To Online Station. Any Fresh Supply & Laying Of Ss Tubing To Be Paid Separately As Per Relevant Sor Item. 188 Disconnecting / Reconnecting All Air Piping / Tubing , Loading, Transportation & Unloading Of Compressor At Designated Locaation ( Within Ga Boundary ) , 189 Disconnecting All Electrical Connections With Booster Compressor / Panel / Other Equipment, Relaying / Testing Of Used Cables If Required, Disconnection Of Earthing Grid From Compressor / Panel / Other Equipment & Recoonection With Online Compressor, Repair Of Earth Elecrodes Etc. Any Fresh Supply And Laying Of Cable / Gi Strip / Earthing Electrod To Be Paid As Per Relevant Sor 190 Architectural Works 191 Supplying And Installing Mandatory Sign Made Of 4Mm Thick. Acm ( Alstrong / Aludecor / Alucobond ) Sheets Cladded On Structural Framework. Matter / Logo In Retro Reflective Sheeting ( Avery / 3M / Equ. ) Type Xi Dg3 Microprismetice As Per Astm D 4956-09 Duly Pasted On Acm In Required Size & Shape, All Complete With By Works, As Approved. 192 300Mm X 600Mm 193 Electrical Works ( Supply ) 194 Design, Engineering, Manufacture, Shop Testing, Supply Includingpacking And Forwarding, Transportation, Delivery At Storage And From Storage To Site Of Power Distribution Board ( Pdb ) And Lighting Distribution Board ( Ldb ) : 195 415 V, 30 Ka Single Front Floor Mounted Type Indoor Pdb To Receive Input Power At Cng Station Consisting Ofbus Bar Chamber, Cable Alley, Complete With Wiring, Indication Lamp, Ammeter, Voltmeter, Mfm ( Multi Function Meter ) Etc Including All Labour And Materials With Operating Mechanism, All Accessories, Mandatory Spares As Per Data Sheet, Auxiliariesetc Complete In All Respects As Specified In Technical Specification, Data Sheet & Sld No. Mec / -- / 05 / E9 / E / 1081A & As Per Standard Specification No. : Mec / Ts / 05 / E9 / 076.Dual Incomer 125 Amp 4P Mccb ( With Micro Processor And Based O / C, S / C & E / F Relase With Lsig & Shunt Trip ) With Electrical Insterlock ( Auto / Mannual ) By Power Contactors , Start / Stop Push Button With Adjustable No / Nc.Outgoing With 2 Nos. 80 Amp Tpn Mccb ( With Tm Based O / C, S / C & E / F Relase With U / V Protection For Booster Feeder Only ) Outgoing With Hrc Fuses -2 Nos. 32 Amp Tpn Mcboutgoing With Fuse 3 Nos. Dp Mcb 10 Amp With Timer ( 24Hrs ) Auto / Mannual And With Fuse 3 Nos. Dp Mcb 10 Amp Without Timer. 196 415 V, 30 Ka Single Front Floor Mounted Type Indoor Pdb To Receive Input Power At Cng Station Consisting Ofbus Bar Chamber, Cable Alley, Complete With Wiring, Indication Lamp, Ammeter, Voltmeter, Mfm ( Multi Function Meter ) Etc Including All Labour And Materials With Operating Mechanism, All Accessories, Mandatory Spares As Per Data Sheet, Auxiliariesetc Complete In All Respects As Specified In Technical Specification, Data Sheet & Sld No. Mec / -- / 05 / E9 / E / 1081A & As Per Standard Specification No. : Mec / Ts / 05 / E9 / 076 .Dual Incomer 100 Amp 4P Mccb ( With Micro Processor And Based O / C, S / C & E / F Relase With Lsig & Shunt Trip ) With Electrical Insterlock ( Auto / Mannual ) By Power Contactors , Start / Stop Push Button With Adjustable No / Nc.Outgoing With 2 Nos. 63 Amp Tpn Mccb ( With Tm Based O / C, S / C & E / F Relase With U / V Protection For Booster Feeder Only ) Outgoing With Hrc Fuses -2 Nos. 32 Amp Tpn Mcboutgoing With Fuse 3 Nos. Dp Mcb 10 Amp With Timer ( 24Hrs ) Auto / Mannual And With Fuse 3 Nos. Dp Mcb 10 Amp Without Timer. 197 415 V, 36 Ka Single Front Floor Mounted Type Indoor Pdb To Receive Input Power At Cng Station Consisting Ofbus Bar Chamber, Cable Alley, Complete With Wiring, Indication Lamp, Ammeter, Voltmeter, Mfm ( Multi Function Meter ) Etc Including All Labour And Materials With Operating Mechanism, All Accessories, Mandatory Spares As Per Data Sheet, Auxiliariesetc Complete In All Respects As Specified In Technical Specification, Data Sheet & Sld No. Mec / -- / 05 / E9 / E / 1081A & As Per Standard Specification No. : Mec / Ts / 05 / E9 / 076 .Dual Incomer Of 400 Amp 4P Mccb ( With Micro Processor And Based O / C, S / C & E / F Relase With Lsig & Shunt Trip ) And 63A 4P Mccb ( With Micro Processor And Based O / C, S / C & E / F Relase With Lsig & Shunt Trip ) With Electrical Insterlock ( Auto / Mannual ) By Power Contactors , Start / Stop Push Button With Adjustable No / Nc.Outgoing With - 2 Nos. 400 Amp Tpn Mccb ( With Tm Based O / C, S / C & E / F Relase ) Outgoing With Hrc Fuses -2 Nos. 32 Amp Tpn Mcb, 2 Nos 32 Amp Tpn Mcboutgoing With Fuse 3 Nos. Dp Mcb 10 Amp With Timer ( 24Hrs ) Auto / Mannual And With Fuse 3 Nos. Dp Mcb 10 Amp Without Timer. 198 415 V, 36 Ka Single Front Floor Mounted Type Indoor Pdb To Receive Input Power At Cng Station Consisting Ofbus Bar Chamber, Cable Alley, Complete With Wiring, Indication Lamp, Ammeter, Voltmeter, Mfm ( Multi Function Meter ) Etc Including All Labour And Materials With Operating Mechanism, All Accessories, Mandatory Spares As Per Data Sheet, Auxiliariesetc Complete In All Respects As Specified In Technical Specification, Data Sheet & Sld No. Mec / -- / 05 / E9 / E / 1081A & As Per Standard Specification No. : Mec / Ts / 05 / E9 / 076 .Dual Incomer Of 315 Amp 4P Mccb ( With Micro Processor And Based O / C, S / C & E / F Relase With Lsig & Shunt Trip ) And 63A 4P Mccb ( With Micro Processor And Based O / C, S / C & E / F Relase With Lsig & Shunt Trip ) With Electrical Insterlock ( Auto / Mannual ) By Power Contactors , Start / Stop Push Button With Adjustable No / Nc.Outgoing With - 2 Nos. 250 Amp Tpn Mccb ( With Tm Based O / C, S / C & E / F Relase ) Outgoing With Hrc Fuses -2 Nos. 32 Amp Tpn Mcb, 2 Nos 32 Amp Tpn Mcboutgoing With Hrc Fuse 3 Nos. Dp Mcb 10 Amp With Timer ( 24Hrs ) Auto / Mannual And With Fuse 3 Nos. Dp Mcb 10 Amp Without Timer. 199 Floor Mounted Apfc Panel Of 40Kvar Capacitor Bank In Steps Of 4X2.5, 4X5, 10 & 20 Capacitor Of Min 10 Nos, Consisting Ofbus Bar Chamber, Cable Alley, Incoming ( Fsu ) , All Outgoing Feeder ( Fsus ) As Specified In Tender Drg. No. Mec / ----- / 05 / E9 / E / 1081B And As Per Specification No. Mec / Ts / 05 / E9 / 076 200 Floor Mounted Apfc Panel Of 50Kvar Capacitor Bank In Steps Of 4X2.5, 4X5, 10 & 20 Capacitor Of Min 10 Nos, Consisting Ofbus Bar Chamber, Cable Alley, Incoming ( Fsu ) , All Outgoing Feeder ( Fsus ) As Specified In Tender Drg. No. Mec / ----- / 05 / E9 / E / 1081B And As Per Specification No. Mec / Ts / 05 / E9 / 076 201 Floor Mounted Apfc Panel Of 10Kvar Capacitor Bank In Steps Of 4X2.5Capacitor Of 4 Nos, Consisting Ofbus Bar Chamber, Cable Alley, Incoming ( Fsu ) , All Outgoing Feeder ( Fsus ) As Specified In Tender Drg. No. Mec / ----- / 05 / E9 / E / 1081B And As Per Specification No. Mec / Ts / 05 / E9 / 076 202 Outdoor Type Dust & Weather Proof Sheet Steel ( 2 Mm Thick ) Enclosed Mccb Of Following Rating For Mounting On Wall Or Pedestal. 125A, 415V, 3 Pole & Neutral Ac-23 Duty And Suitable For Termination Of 3.5 X 95 / 50 Sq.Mm A2xfy Cable On Incomer Terminals Andoutgoing Terminals. 203 Outdoor Type Dust & Weather Proof Sheet Steel ( 2 Mm Thick ) Enclosed Mccb Of Following Rating For Mounting On Wall Or Pedestal. 315A, 415V, 3 Pole & Neutral Ac-23 Duty And Suitable For Termination Of 3.5 X 120 / 95 Sq.Mm A2xfy Cable On Incomer Terminals Andoutgoing Terminals. 204 Outdoor Type Dust & Weather Proof Sheet Steel ( 2 Mm Thick ) Enclosed Mccb Of Following Rating For Mounting On Wall Or Pedestal. 400A, 415V, 3 Pole & Neutral Ac-23 Duty And Suitable For Termination Of 3.5 X 240 / 150 Sq.Mm A2xfy Cable On Incomer Terminals Andoutgoing Terminals. 205 Outdoor Type Dust & Weather Proof Sheet Steel ( 2 Mm Thick ) Enclosed Mccb Of Following Rating For Mounting On Wall Or Pedestal. 100A, 415V, 3 Pole & Neutral Ac-23 Duty And Suitable For Termination Of 3.5 X 95 / 50 Sq.Mm A2xfy Cable On Incomer Terminals Andoutgoing Terminals. 206 Design, Engineering, Supply Includingpacking And Forwarding, Transportation, Delivery At Storage, Of The Complete Earthing And Lightning Protection System, Earth Electrodes / Pit, Earth Main Ring, Earthing Of Electrical Equipments, Instrument Panels, Field Instruments, Process Equipments And Pipes / Flanges Including All Associated Civil Work With All Material ( Like Bitumen Coating ) And Labour As Per Specification And Drawings Approved By The Company In With Is 3043. 207 Earth Pits- Gi Pipe Electrode With 6 Mm Thick Chequered Plate Cover 208 Earth Pits- Copper Plate Electrode With 6 Mm Thick Chequered Plate Cover 209 Gi Strip ( 50X6 ) Mm 210 Gi Strip ( 25X3 ) Mm 211 Gi Lightning Rod 25 Mm Dia. 1800 Mm Long Including Supply Of All Hardware Bare Copper Rope Labour Etc. Complete As Per Approved Drawings, Specifications And Directions Of Engineer-In-Charge. 212 Advance Maintenance Free Earthing System With 3Mtr Earth Electrode Of Low Carbon Steel With 250 Micron Copper Coating With Carbon Based Backfill Compound As Per Is 3043 / Ieee-80. 213 25 Sq Mm Green Fexible Copper Wire ( Approx 10Mtrs ) Along With Two Nos Clamps Harware Etc Shall Be Complete Including Mettalic Cover Box ( Suitable For Outdoor ) , Size 400X400x200 In All Respect To Earthing / Ground Of Lcv At Two Points. 214 Design, Engineering, Supply Includingpacking And Forwarding, Transportation, Delivery At Storage, Of The 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Frls Power And Control Cables ( Conforming To Is:7098 And Specification ) Of Following Sizes In Trenches / Excavated Under Ground Trench / Trays, Pulling Through Pipes And Its Proper Sealing, Cutting Of Paved Area, Roads Etc. 215 3.5X 150 Mm2 A2xfy 216 3.5X 120 Mm2 A2xfy 217 3.5X 50 Mm2 A2xfy 218 4X 25 Mm2 A2xfy 219 4X10 Mm2 2Xwy 220 4X 6 Mm2 2Xwy 221 4X 2.5 Mm2 2Xwy 222 2X 1.5 Mm2 2Xwy 223 Supply Includingpacking And Forwarding, Transportation, Delivery At Storage Of Lighting Fixtures Complete With Mounting Bracket, Flame Proof / Non Flame Proof, Control Gear Box As Per The Type Of Fixture, Lamps Etc. Including Civil Work With Pipe Inserts For Cables And Connecting Work, With All Material And Labour As Per Specifications, Drawings And Instruction Of Engineer-In-Charge. Work To Be Completed In All Respects. 224 Street Lighting, Integral Flame Proof Well Glass Fixture ( Cmifr Approved For Zone-1 / 2 Gas Group Iia & Iib ) With 100 W Led Luminaire With Flame Proof Control Gear Model No. Flpw-1095 Of Baliga Make Or Equivalent ) 225 Supply Of Integral Flame Proof Flood Light Fixture ( Cmifr Approved For Zone-1 / 2 Gas Group Iia & Iib ) With 100 Led Luminaire Baliga Make Or Equivalent ) 226 Supply Of The Underlights For The Canopy As Specified Including Lighting Fixture Flame Proof Enclosure For Bulk Head Fitting ( Bh / Oa / 124, 1 X Led, 150W ) Of Sudhir Make Or Equivalent, Juction Boxes Etc. As Requried. 227 Street Lighting Pole 6Mtr High Gi Octagonal Pole ( Type Bop-6030 Of Bajaj Make Or Equivalent ) Complete With Bracket, Gi Clamps For Fixing Flame Proof Control Gear Box As Per Standard Drawing ( Mec / Sd / 05 / E9 / 77 / 04 ) & Specification ( Mec / Ts / 05 / E9 / 077B ) . 228 Supply Of Point Wiring As Per Details In Construction Drawing & Specificationincludespvc Conduits In Ceiling, Complete Wiring Including Flexible Wire ( Fr Pvc ) , Switch Boxes & Switches ( Anchor Roma Make Or Equivalent ) , Multi Strand Flexible Hr Pvc Insulated Copper Conductor Wires / Cables For Following Items- 229 Light Point 230 Surface / Recess Mounted Led Light Fixrure With Led Lamp ( Type Lctl-18 -Cdl Of Cg Make Or Equivalent ) . 231 Industrial Flame Proof Fluorescent Lamp / Led Fitting With Lamp ( Type Extl 240 Of Cg Make Or Equivalent ) . 232 Flame Proof ( Cmifr Approved ) 12 Exhaust Fan.0.25Hp Motor, 1440 Rpm. ( Preferred Make: Baliga, Fcg, Cgl, Prompt ) 233 Socket Outlet ( 5 / 15 Amp Combination ) Of Anchor Roma Make Or Equivalent 234 Wall Mounted Fan With Electronic Regulator ( Energy Efficent, 50W, ) Etc Complete In All Respect For Wall Mounting 235 Ups System 236 Design, Supply, Packing, Forwarding, Delivery By Equipment Supplier At Site Including Commissioning Spares As Requiredof Ups Systems As Per Specification, Block Diagram And Following Rating : 237 3Kva, 230 V Single Phase, 50 Hz, Single Industrial Type, Ups System Suitable For Input Power Supply Voltage Of 320V-460V- Tpn ( 184-265V / Ph ) , Output 230 V + / - 1%, Ac With Bypass Supply, Battery Bank , Acdb ( Incomer 32A Dp Mcb & Outgoing 2 Nos. 6A Dp Mcb & 6 Nos.10A Dp Mcb ) And 4.0 Hrs. Battery Backup ( Vrla, 12V ) And Battery Capacity Shall Not Be Less Than 18 Kvah ( Where Kvah = Battery Ah X 12 V X No. Of Batteries ) . Main Input Transformer Rating Shall Not Be Less Than 9 Kva, As Per Block Diagram, Specification & Data Sheet And Shall Be Complete In All Respect. .All Interconnecting Cables Among Ups, Rectifier, Battery Stand, Acdb / Dcdbetc ( 20 Mtr Shall Be Considered Between Battery Bank And Ups Panel, 20 Mtr Cable Shall Be Considered Between Acdb And Ups Panel And Any Other Cable Which Is Not Defined Here But Necessary For Satisfactory Operation Of The Ups System ) .Make: M / S Hirel, M / S Dubas And M / S Synergy Systems 238 Supply Of Following Sizes Ofhdpe Pipein Required Length , Supply Of Clamps, Small Iron Structures, Spacersplugs, Sealent Etc. And Materials Complete As Per Approved Drawingsand Directions Of Engineer-In-Charge. 239 50 Mm Nb 240 100 Mm Nb 241 Supply Of Following Hot Dip Galvanized Ladder / Perforated Typecable Trays ( As Per Is 2629 ) Including Bends, Tee, Crosses, Horizontal And Vertical Splices Along With Cable Tray Cover ( Wherever Required For Asthetic Look ) Etc. As Required Including Supply Of All G.I Hardwares, All Labour And Material As Required As Per Standard Drawings, Specification And Direction Ofengineer-In-Charge 242 Perforated Type, Made From 50Mm Height And 2.5 Mm Thick Sheet Steel & Galvanized ( 86 Microns ) Of Following Sizes. 243 150Mm Wide 244 300Mm Wide 245 Erection Material 246 Supply Of Ms Base Frame Support For Switch Gear And Bracket For Misc. Electrical Equipment, Cable Tray Support Out Of Roled Ms Section, Pipes, Plates Etc Including Welding, Bolting, Reveting, Supply Of Necessary Anchor Bolts And Grouting Etc Supply Of Paints Applying One Coat Of Anti Rust Primer Two Finish Coats Of Approved Synthetic Enamel Paints Including Bracking Walls, Floors Etc For Structure As Required Including Supply Of All Gi Hardware Materials Including All Labour And Materials Complete As Required And The Direction Of Engineer-In-Charge. 247 For Mother Station ( Gas Engine ) 248 For Mother Station ( Motor ) 249 For On-Line ( Motor ) 250 For Dbs ( Motor ) 251 Supply Of The Following Including The Supply Of Necessary Clamp, Bolts, Rawl Plugs Etc. Breaking And Making Good Of Walls, If Required , And Including All Labour And Materials Complete As Per Directions Of Engineer-In-Charge, Applicable Standards And Indian Electricity Rules. 252 Shock Hazard Charts Complete With Frame And Glass 253 First Aid Boxes 254 Carbon-Di-Oxide ( Co2 ) Type Fire Extinguisher 4.5 Kg Capacity Complete With Gunmetal Valve Conforming To Is : 3224 With Isi Mark , Discharge Horn With Bend & Wall Fixing Bracket With Mfg. Test Certificate 255 Caution Boards ( Danger, High Volatage ) Including Supply Of Necessary Clamps, Bolts And Other Hardware. 256 Single Line Diagram Complete In Glass Frame. ( Size 600X800mm ) 257 Supply Ofinsulating Mats 11Kv Grade ( As Per Is:15652 - 2006 ) Of 1000Mm Width, Required For Maintenance Of Electrical Equipment In Substation As Required Including Cutting To Required Shape In Running Length And Including All Labour And Materials Etc. Complete And As Per Directions Of Engineer-In-Charge As Per Applicable Indian Or International Standards And Indian Electricity Rules. 258 Supply Of Electrical Accessories Including, Cable Tags, Cable Tie , Flexible Pvc Conduit, Cable Marker, Nickle Plated Lugs, Double Compressed Brass Cable Glands, Brass Adaptar / Reducers / Nipples, Fixing Of Metallic Anchor Fasteners For Supporting Of Cable Trays And Misc. Electrical Switchgear Including All Labour And Materials Complete As Required And As Per Directions Of Engineer-In-Charge. 259 For Mother Station ( Gas Engine ) 260 For Mother Station ( Motor ) 261 For On-Line ( Motor ) 262 For Dbs ( Motor ) 263 Telephone & Lan 264 Supply Of Telephone Sockets ( Piano Reed Type ) In Recess Pvc Conduit Including Pvc Conduit, Telephone Socket, Cable, Accessories Etc As Required. 265 Supply Of Lan Sockets In Recess Pvc Conduit Including Pvc Conduit, Telephone Socket, Cable, Accessories Etc As Required. 266 Supply Of 2 Pairs, 0.61Mm, Telephone Cable / Wire, Includingaccessories Etc As Required. 267 Supply Of Utp Cable ( Cat 6 ) , Make : D Link / Amp / Lucent 268 Electrical Works ( Erection ) 269 Erection, Testing And Commissioning Of Power Distribution Board ( Pdb ) And Lighting Distribution Board ( Ldb ) : 270 415 V, 30 Ka Single Front Floor Mounted Type Indoor Pdb To Receive Input Power At Cng Station Consisting Ofbus Bar Chamber, Cable Alley, Complete With Wiring, Indication Lamp, Ammeter, Voltmeter, Mfm ( Multi Function Meter ) Etc Including All Labour And Materials With Operating Mechanism, All Accessories, Mandatory Spares As Per Data Sheet, Auxiliariesetc Complete In All Respects As Specified In Technical Specification, Data Sheet & Sld No. Mec / -- / 05 / E9 / E / 1081A & As Per Standard Specification No. : Mec / Ts / 05 / E9 / 076 .Dual Incomer 125 Amp 4P Mccb ( With Micro Processor And Based O / C, S / C & E / F Relase With Lsig & Shunt Trip ) With Electrical Insterlock ( Auto / Mannual ) By Power Contactors , Start / Stop Push Button With Adjustable No / Nc.Outgoing With 2 Nos. 80 Amp Tpn Mccb ( With Tm Based O / C, S / C & E / F Relase With U / V Protection For Booster Feeder Only ) Outgoing With Hrc Fuses -2 Nos. 32 Amp Tpn Mcboutgoing With Fuse 3 Nos. Dp Mcb 10 Amp With Timer ( 24Hrs ) Auto / Mannual And With Fuse 3 Nos. Dp Mcb 10 Amp Without Timer. 271 415 V, 30 Ka Single Front Floor Mounted Type Indoor Pdb To Receive Input Power At Cng Station Consisting Ofbus Bar Chamber, Cable Alley, Complete With Wiring, Indication Lamp, Ammeter, Voltmeter, Mfm ( Multi Function Meter ) Etc Including All Labour And Materials With Operating Mechanism, All Accessories, Mandatory Spares As Per Data Sheet, Auxiliariesetc Complete In All Respects As Specified In Technical Specification, Data Sheet & Sld No. Mec / -- / 05 / E9 / E / 1081A & As Per Standard Specification No. : Mec / Ts / 05 / E9 / 076.Dual Incomer 100 Amp 4P Mccb ( With Micro Processor And Based O / C, S / C & E / F Relase With Lsig & Shunt Trip ) With Electrical Insterlock ( Auto / Mannual ) By Power Contactors , Start / Stop Push Button With Adjustable No / Nc.Outgoing With 2 Nos. 63 Amp Tpn Mccb ( With Tm Based O / C, S / C & E / F Relase With U / V Protection For Booster Feeder Only ) Outgoing With Hrc Fuses -2 Nos. 32 Amp Tpn Mcboutgoing With Fuse 3 Nos. Dp Mcb 10 Amp With Timer ( 24Hrs ) Auto / Mannual And With Fuse 3 Nos. Dp Mcb 10 Amp Without Timer. 272 415 V, 36 Ka Single Front Floor Mounted Type Indoor Pdb To Receive Input Power At Cng Station Consisting Ofbus Bar Chamber, Cable Alley, Complete With Wiring, Indication Lamp, Ammeter, Voltmeter, Mfm ( Multi Function Meter ) Etc Including All Labour And Materials With Operating Mechanism, All Accessories, Mandatory Spares As Per Data Sheet, Auxiliariesetc Complete In All Respects As Specified In Technical Specification, Data Sheet & Sld No. Mec / -- / 05 / E9 / E / 1081A & As Per Standard Specification No. : Mec / Ts / 05 / E9 / 076 .Dual Incomer Of 400 Amp 4P Mccb ( With Micro Processor And Based O / C, S / C & E / F Relase With Lsig & Shunt Trip ) And 63A 4P Mccb ( With Micro Processor And Based O / C, S / C & E / F Relase With Lsig & Shunt Trip ) With Electrical Insterlock ( Auto / Mannual ) By Power Contactors , Start / Stop Push Button With Adjustable No / Nc.Outgoing With - 2 Nos. 400 Amp Tpn Mccb ( With Tm Based O / C, S / C & E / F Relase ) Outgoing With Hrc Fuses -2 Nos. 32 Amp Tpn Mcb, 2 Nos 32 Amp Tpn Mcboutgoing With Fuse 3 Nos. Dp Mcb 10 Amp With Timer ( 24Hrs ) Auto / Mannual And With Fuse 3 Nos. Dp Mcb 10 Amp Without Timer. 273 415 V, 36 Ka Single Front Floor Mounted Type Indoor Pdb To Receive Input Power At Cng Station Consisting Ofbus Bar Chamber, Cable Alley, Complete With Wiring, Indication Lamp, Ammeter, Voltmeter, Mfm ( Multi Function Meter ) Etc Including All Labour And Materials With Operating Mechanism, All Accessories, Mandatory Spares As Per Data Sheet, Auxiliariesetc Complete In All Respects As Specified In Technical Specification, Data Sheet & Sld No. Mec / -- / 05 / E9 / E / 1081A & As Per Standard Specification No. : Mec / Ts / 05 / E9 / 076 .Dual Incomer Of 315 Amp 4P Mccb ( With Micro Processor And Based O / C, S / C & E / F Relase With Lsig & Shunt Trip ) And 63A 4P Mccb ( With Micro Processor And Based O / C, S / C & E / F Relase With Lsig & Shunt Trip ) With Electrical Insterlock ( Auto / Mannual ) By Power Contactors , Start / Stop Push Button With Adjustable No / Nc.Outgoing With - 2 Nos. 250 Amp Tpn Mccb ( With Tm Based O / C, S / C & E / F Relase ) Outgoing With Hrc Fuses -2 Nos. 32 Amp Tpn Mcb, 2 Nos 32 Amp Tpn Mcboutgoing With Hrc Fuse 3 Nos. Dp Mcb 10 Amp With Timer ( 24Hrs ) Auto / Mannual And With Fuse 3 Nos. Dp Mcb 10 Amp Without Timer. 274 Floor Mounted Apfc Panel Of 40Kvar Capacitor Bank In Steps Of 4X2.5, 4X5, 10 & 20 Capacitor Of Min 10 Nos, Consisting Ofbus Bar Chamber, Cable Alley, Incoming ( Fsu ) , All Outgoing Feeder ( Fsus ) As Specified In Tender Drg. No. Mec / ----- / 05 / E9 / E / 1081B And As Per Specification No. Mec / Ts / 05 / E9 / 076 275 Floor Mounted Apfc Panel Of 50Kvar Capacitor Bank In Steps Of 4X2.5, 4X5, 10 & 20 Capacitor Of Min 10 Nos, Consisting Ofbus Bar Chamber, Cable Alley, Incoming ( Fsu ) , All Outgoing Feeder ( Fsus ) As Specified In Tender Drg. No. Mec / ----- / 05 / E9 / E / 1081B And As Per Specification No. Mec / Ts / 05 / E9 / 076 276 Floor Mounted Apfc Panel Of 10Kvar Capacitor Bank In Steps Of 4X2.5Capacitor Of 4 Nos, Consisting Ofbus Bar Chamber, Cable Alley, Incoming ( Fsu ) , All Outgoing Feeder ( Fsus ) As Specified In Tender Drg. No. Mec / ----- / 05 / E9 / E / 1081B And As Per Specification No. Mec / Ts / 05 / E9 / 076 277 Outdoor Type Dust & Weather Proof Sheet Steel ( 2 Mm Thick ) Enclosed Mccb Of Following Rating For Mounting On Wall Or Pedestal. 125A, 415V, 3 Pole & Neutral Ac-23 Duty And Suitable For Termination Of 3.5 X 95 / 50 Sq.Mm A2xfy Cable On Incomer Terminals Andoutgoing Terminals. 278 Outdoor Type Dust & Weather Proof Sheet Steel ( 2 Mm Thick ) Enclosed Mccb Of Following Rating For Mounting On Wall Or Pedestal. 250A, 415V, 3 Pole & Neutral Ac-23 Duty And Suitable For Termination Of 3.5 X 120 / 95 Sq.Mm A2xfy Cable On Incomer Terminals Andoutgoing Terminals. 279 Outdoor Type Dust & Weather Proof Sheet Steel ( 2 Mm Thick ) Enclosed Mccb Of Following Rating For Mounting On Wall Or Pedestal. 400A, 415V, 3 Pole & Neutral Ac-23 Duty And Suitable For Termination Of 3.5 X 240 / 150 Sq.Mm A2xfy Cable On Incomer Terminals Andoutgoing Terminals. 280 Outdoor Type Dust & Weather Proof Sheet Steel ( 2 Mm Thick ) Enclosed Mccb Of Following Rating For Mounting On Wall Or Pedestal. 100A, 415V, 3 Pole & Neutral Ac-23 Duty And Suitable For Termination Of 3.5 X 95 / 50 Sq.Mm A2xfy Cable On Incomer Terminals Andoutgoing Terminals. 281 Erection, Testing And Commissioning Of 415V / 240V Lighting / Power Panels, Surface / Recess Mounting Type In Weather / Flame Proof ( With Hinged Cover ) Sheet Steel Enclosure Of Approved Make Having 4 Pole Mccb ( Lsig ) / Rccb ( Mcb + Elcb ) As Incoming Andsp / Dp / Tp Mcb ( 9Ka Type ) For Out Going Circuit Complete With Wiring, Indication Lamp, Ammeter Etc Including All Labour And Materials As Per Specification And The Direction Of Engineer-In-Charge. 282 Earth Pits- Gi Pipe Electrode With 6 Mm Thick Chequered Plate Cover 283 Earth Pits- Copper Plate Electrode With 6 Mm Thick Chequered Plate Cover 284 Gi Strip ( 50X6 ) Mm 285 Gi Strip ( 25X3 ) Mm 286 Gi Lightning Rod 25 Mm Dia. 1800 Mm Long Including Supply Of All Hardware Bare Copper Rope Labour Etc. Complete As Per Approved Drawings, Specifications And Directions Of Engineer-In-Charge. 287 Advance Maintenance Free Earthing System With 3Mtr Earth Electrode Of Low Carbon Steel With 250 Micron Copper Coating With Carbon Based Backfill Compound As Per Is 3043 / Ieee-80. 288 25 Sq Mm Green Fexible Copper Wire ( Approx 10Mtrs ) Along With Two Nos Clamps Harware Etc Shall Be Complete Including Mettalic Cover Box ( Suitable For Outdoor ) , Size 400X400x200 In All Respect To Earthing / Ground Of Lcv At Two Points. 289 Laying, Termination, Glanding, Testing Of The 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Frls Power And Control Cables ( Conforming To Is:7098 And Specification ) Of Following Sizes In Trenches / Excavated Under Ground Trench / Trays, Pulling Through Pipes And Its Proper Sealing, Cutting Of Paved Area, Roads Etc. 290 3.5X 150 Mm2 A2xfy 291 3.5X 120 Mm2 A2xfy 292 3.5X 50 Mm2 A2xfy 293 4X 25 Mm2 A2xfy 294 4X10 Mm2 2Xwy 295 4X 6 Mm2 2Xwy 296 4X 2.5 Mm2 2Xwy 297 2X 1.5 Mm2 2Xwy 298 Erection, Testing And Commissioning Of Lighting Fixtures, Pole Complete With Mounting Bracket, Flame Proof / Non Flame Proof, Control Gear Box As Per The Type Of Fixture, Lamps Etc. Including Civil Work With Pipe Inserts For Cables And Connecting Work, With All Material And Labour As Per Specifications, Drawings And Instruction Of Engineer-In-Charge.Work To Be Completed In All Respects. 299 Street Lighting, Integral Flame Proof Well Glass Fixture ( Cmifr Approved For Zone-1 / 2 Gas Group Iia & Iib ) With 72 W Led Luminaire With Flame Proof Control Gear Model No. Flpw-1095 Of Baliga Make Or Equivalent ) 300 Integral Flame Proof Flood Light Fixture ( Cmifr Approved For Zone-1 / 2 Gas Group Iia & Iib ) With 72 W Led Luminaire Baliga Make Or Equivalent ) 301 Underlights For The Canopy As Specified Including Lighting Fixture Flame Proof Enclosure For Bulk Head Fitting ( Bh / Oa / 124, 1 X Led, 150W ) Of Sudhir Make Or Equivalent, Juction Boxes Etc. As Requried. 302 Street Lighting Pole 6Mtr High Gi Octagonal Pole ( Type Bop-6030 Of Bajaj Make Or Equivalent ) Complete With Bracket, Gi Clamps For Fixing Flame Proof Control Gear Box As Per Standard Drawing ( Mec / Sd / 05 / E9 / 77 / 04 ) & Specification ( Mec / Ts / 05 / E9 / 077B ) . 303 Erection, Testing & Commissioning Of Point Wiring As Per Details In Construction Drawing & Specificationincludespvc Conduits In Ceiling, Complete Wiring Including Flexible Wire ( Fr Pvc ) , Switch Boxes & Switches ( Anchor Roma Make Or Equivalent ) , Multi Strand Flexible Hr Pvc Insulated Copper Conductor Wires / Cables For Following Items- 304 Light Point 305 Surface / Recess Mounted Led Light Fixrure With Led Lamp ( Type Lctl-18 -Cdl Of Cg Make Or Equivalent ) . 306 Industrial Flame Proof Fluorescent Lamp / Led Fitting With Lamp ( Type Extl 240 Of Cg Make Or Equivalent ) . 307 Flame Proof ( Cmifr Approved ) 12 Exhaust Fan.0.25Hp Motor, 1440 Rpm. ( Preferred Make: Baliga, Fcg, Cgl, Prompt ) 308 Socket Outlet ( 5 / 15 Amp Combination ) Of Anchor Roma Make Or Equivalent 309 Wall Mounted Fan With Electronic Regulator ( Energy Efficent, 50W, ) Etc Complete In All Respect For Wall Mounting 310 Ups System 311 Erection, Testing And Commissioning By Equipment Manufacturer At Site Including Commissioning Spares As Requiredof Ups Systems As Per Specification, Block Diagram And Following Rating : 312 3Kva, 230 V Single Phase, 50 Hz, Single Industrial Type, Ups System Suitable For Input Power Supply Voltage Of 320V-460V- Tpn ( 184-265V / Ph ) , Output 230 V + / - 1%, Ac With Bypass Supply, Battery Bank , Acdb ( Incomer 32A Dp Mcb & Outgoing 2 Nos. 6A Dp Mcb & 6 Nos.10A Dp Mcb ) And 4.0 Hrs. Battery Backup ( Vrla, 12V ) And Battery Capacity Shall Not Be Less Than 18 Kvah ( Where Kvah = Battery Ah X 12 V X No. Of Batteries ) . Main Input Transformer Rating Shall Not Be Less Than 9 Kva, As Per Block Diagram, Specification & Data Sheet And Shall Be Complete In All Respect. Make: M / S Hirel, M / S Dubas And M / S Synergy Systems.All Interconnecting Cables Among Ups, Rectifier, Battery Stand, Acdb / Dcdbetc ( 20 Mtr Shall Be Considered Between Battery Bank And Ups Panel, 20 Mtr Cable Shall Be Considered Between Acdb And Ups Panel And Any Other Cable Which Is Not Defined Here But Necessary For Satisfactory Operation Of The Ups System ) . 313 Erection Of Following Sizes Of Hdpe Pipe Including Bend Route As Required Length , Clamps, Small Iron Structures, Spacersplugs, Sealent Etc. And Materials Complete As Per Approved Drawingsand Directions Of Engineer-In-Charge. 314 50 Mm Nb 315 100 Mm Nb 316 Erection, Testing And Commissioning Of Following Hot Dip Galvanized Ladder / Perforated Typecable Trays ( As Per Is 2629 ) Including Bends, Tee, Crosses, Horizontal And Vertical Splices Along With Cable Tray Cover ( Wherever Required For Asthetic Look ) Etc. As Required Including All G.I Hardwares, All Labour And Material As Required As Per Standard Drawings, Specification And Direction Ofengineer-In-Charge 317 Perforated Type, Made From 50Mm Height And 2.5 Mm Thick Sheet Steel & Galvanized ( 86 Microns ) Of Following Sizes. 318 150Mm Wide 319 300Mm Wide 320 Erection Material 321 Erection, Fixing And Commissioning Of Ms Base Frame Support For Switch Gear And Bracket For Misc. Electrical Equipment, Cable Tray Support Out Of Roled Ms Section, Pipes, Plates Etc Including Welding, Bolting, Reveting, Necessary Anchor Bolts And Grouting Etc Paints Applying One Coat Of Anti Rust Primer Two Finish Coats Of Approved Synthetic Enamel Paints Including Bracking Walls, Floors Etc For Structure As Required Including All Gi Hardware Materials Including All Labour And Materials Complete As Required And The Direction Of Engineer-In-Charge. 322 For Mother Station ( Gas Engine ) 323 For Mother Station ( Motor ) 324 For On-Line ( Motor ) 325 For Dbs ( Motor ) 326 Erection And Commissioning Of The Following Including Necessary Clamp, Bolts, Rawl Plugs Etc. Breaking And Making Good Of Walls, If Required , And Including All Labour And Materials Complete As Per Directions Of Engineer-In-Charge, Applicable Standards And Indian Electricity Rules. 327 Shock Hazard Charts Complete With Frame And Glass 328 First Aid Boxes 329 Carbon-Di-Oxide ( Co2 ) Type Fire Extinguisher 4.5 Kg Capacity Complete With Gunmetal Valve Conforming To Is : 3224 With Isi Mark , Discharge Horn With Bend & Wall Fixing Bracket With Mfg. Test Certificate 330 Caution Boards ( Danger, High Volatage ) Including Supply Of Necessary Clamps, Bolts And Other Hardware. 331 Single Line Diagram Complete In Glass Frame. ( Size 600X800mm ) 332 Laying And Pasting Ofinsulating Mats 11Kv Grade ( As Per Is:15652 - 2006 ) Of 1000Mm Width, Required For Maintenance Of Electrical Equipment In Substation As Required Including Cutting To Required Shape In Running Length And Including All Labour And Materials Etc. Complete And As Per Directions Of Engineer-In-Charge As Per Applicable Indian Or International Standards And Indian Electricity Rules. 333 Erection, Commissioning And Fixing Of Electrical Accessories Including, Cable Tags, Cable Tie , Flexible Pvc Conduit, Cable Marker, Nickle Plated Lugs, Double Compressed Brass Cable Glands, Brass Adaptar / Reducers / Nipples, Fixing Of Metallic Anchor Fasteners For Supporting Of Cable Trays And Misc. Electrical Switchgear Including All Labour And Materials Complete As Required And As Per Directions Of Engineer-In-Charge. 334 For Mother Station 335 For Bus Depo 336 For Dbs / Ro / Online 337 For Dcu 338 Telephone & Lan 339 Installation, Testing And Commissioning Of Telephone Sockets ( Piano Reed Type ) In Recess Pvc Conduit Including Pvc Conduit, Telephone Socket, Cable, Accessories Etc As Required. 340 Installation, Testing And Commissioning Of Lan Sockets In Recess Pvc Conduit Including Pvc Conduit, Telephone Socket, Cable, Accessories Etc As Required. 341 Installation, Testing And Commissioning Of 2 Pairs, 0.61Mm, Telephone Cable / Wire, Includingaccessories Etc As Required. 342 Installation, Testing And Commissioning Of Utp Cable ( Cat 6 ) , Make : D Link / Amp / Lucent 343 All Works Relating To Statutory Approvals Of The Installation From Competent Authority Like Electrical Inspectorate, Cea, Dgms, Seb Etc. Including Carrying Out Of All Required Modifications In Design / Manufacturer / Installation To Meet The Requirement Of Indian Electricity Rules And Other Statutory Regulations In Force, Carrying Out Necessary Paper Work And Liasion With The Authorities To Obtain All Necessary Clearances For Charging Of Installation As Per Relevant National Standards For Mother Cng Station. However The Official Fees Towards The Approvals Shall Be Reimbursed By The Client.
