|
| 1 | Taking down carefullyCopper/ aluminium point wiringlight, Fan, socket orpower completeincluding fixture & fitting such as switches, sockets or power socket complete fitting bracket holder, boards, and making good disturbed surfaces of wall and ceiling etc. |
| 2 | Taking down carefully unserviceable sub main wiring/PVC cable including conduit/casing patti etc. |
| 3 | Taking down unserviceable DBs any type / size carefully disconnecting and making good disturbed surfaces complete all as directed. |
| 4 | Taking down unserviceable MCB SP/SPN/Isolator/MCCB ofany rating & size. |
| 5 | M &L for Point wiring complete with 1.5 Sqmm single core unsheathed PVC insulated 1100 V, FRLS grade with multistranded copper conductor ISI marked drawn through and including PVC casing & capping fixed on surface wall/ceiling and including modular cover plates and modular flush boxes for mounting of switches, sockets regulators etc including 1.5 Sqmm PVC insulted unsheathed cable multistranded with copper conductor and connecting to earth dolly for light, fan, plug and bell and making goodthe distributed surfacess completely matched and finished with existing surfacess all as directed and specified by Engr-in-charge.(a)One light point controlled by one 5 Amps one way switch. |
| 6 | (b)One light point controlled by two way switch |
| 7 | (c)One ceiling Fan, Exhaust Fan point controlled by one 5 Amps switch. |
| 8 | (d ) One bell/buzzer point controlled by one bell push button on independent board. |
| 9 | (e)One 3 Pin 6 Amps socket point on the independent board. |
| 10 | (f)One 3 pin 6 Amp socket point on the same board with other switch. |
| 11 | All as perabove item No-5but with 2.5 Sqmm cable for 15 Amp switch socket out let point on independent board including 2.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor all as directed and specified by Engr-in-charge. |
| 12 | Cutting chases ,pinning in making good to facing where required and pointing in cement motar 1:3 to end or edges of landings,steps, cills,sunshades ,shelves, lintels, etc.and cutting hases for concealed water tubing or concealed water tubing or concealed conduit wiring,etc.and making good cutting exceeding 10cm girth |
| 13 | M &L for Point wiring complete with 1.5 Sqmm single core unsheathed PVC insulated 1100 V, FRLS grade with multistranded copper conductor ISI marked drawn through PVC Conduit recess/surface fixed modular cover plates and modular flush boxes for mounting of switches, sockets regulators etc including 1.5 Sqmm PVC insulted unsheathed cable multistranded with copper conductor and connecting to earth dolly for light, fan, plug and bell and making goodthe distributed surfacess completely matched and finished with existing surfacess all as directed and specified by Engr-in-charge.(a)One light point controlled by one 6 Amps one way switch |
| 14 | (b)One ceiling Fan, Exhaust Fan point controlled by one 6 Amps switch. |
| 15 | (c ) One bell/buzzer point controlled by one bell push button on independent. |
| 16 | (d)One light point controlled by 2 Nos,6 amps Two way switch. |
| 17 | (e)One 3 pin socket out let 6 Amp point on independent board |
| 18 | (f)One 3 Pin socket out let 6 Amp point on the same board with other switch. |
| 19 | All as per above item No-7but with 4 Sqmm cable for 16 Amps switch sockets out let point on independent board including 2.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor. |
| 20 | Supply and fixing switch piano flushtype , single pole one way 5 Amps |
| 21 | Supply and fixing switch piano flush type , single pole two way 5 Amps |
| 22 | Supply and fixing Bell push flush type SP 5 Amps. |
| 23 | Supply and fixing switch socketcombination out let 5 pin 6 Amps flush type. |
| 24 | Supply and fixing switch socket combination 2 in 1, 5 and 16 Amps flush type . |
| 25 | Supply and fixing modularswitch 6 Amps. |
| 26 | Supply and fixing modularswitch 6 Amps 2 way |
| 27 | Supply and fixing modularswitch 16 Amps. |
| 28 | Supply and fixing Bell pushmodular type SP 6 Amps. |
| 29 | Supply and fixing socketcombination out let 2/3 pin 6 Amps modular type. |
| 30 | Supply and fixing switch socket out let 2 / 3 pin 6 and 16 Amps 2 modular type. |
| 31 | Supply and fixing ceiling rose ,3 phase ,PVC polycarbonate ,insulated body. |
| 32 | Supply and fix fan regulator electronic 2 modular type volts AC 50 HZ ,100 Watts,4 step complete all as directed. |
| 33 | Supply and fix call bell (Ding Dong) 240 V, 50 Hz |
| 34 | M&L for lamp holder pendant/angle type insulated body with back plate all as directed and specified by Engineer-in-Charge. |
| 35 | Supply and fixing in replacement of existing unserviceable T/L fitting 36/40 W on existing wall withNew LED Batten for LED tube light 18/20 wattswith necessary braket,clamps ,incl. bolts, nuts & washers for fixing arrangement etc complete all as specifed and directed by Engineer-in-charge.Make-Bajaj Cat No BLRB-DB 118 or eqvt make of Havells/PHILIPS/WIPRO/CG |
| 36 | Supply and fixingLED Rod tube light 18/20 wattswith necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge.Make-Bajaj Cat No BLRB-18W CW LED or eqvt make of Havells/ PHILIPS/WIPRO/CG |
| 37 | Supply and fixing in replacement of existing unserviceable T/L fitting 20 W/Lamp holder on existing wall with LED light fitting 10 watts with LED tube rod, ready to use pack with necessary braket,clamps ,incl. bolts, nuts & washers for fixing arrangement etc complete all as specifed and directed by Engineer-in-charge.Make-Bajaj Cat No BCLSB 10 WH or eqvt make of PHILIPS/WIPRO/CG |
| 38 | Supply & fixing of surface mounting round downlight LED 12 watt luminarie complete fittingwith all fixing arrangementall as specifiedand directed by Engr-in-Charge. Make-Bajaj Cat No BGSLO SLEEK SURFACE12WWH RDor eqvt make of PHILIPS/WIPRO/CG |
| 39 | Supply & fixing of 30 Watt LED security light fitting with pressure dia cast housing, prismatic, polycarbonate diffuser and IP65 protection with 0.6 mtr long 20/25 mm (as per manufacturer standard)dia GI Pipe in 45 degree bend shape and necessary clamping devices required at site complete all as specifiedand directed by Engr-in-Charge. Make-Bajaj Cat No ENXTP 30 L WH CR PC SD or eqvt make of PHILIPS/WIPRO/CG |
| 40 | Supply & fixing of recess mounting 2x2 LEDluminarie, 36 W deep drawn CRCA housing with high power LED premium white powder coated frame blends seamlessly with ceiling layout, suitable for 600x600 mm modular ceiling grid and also can be suspended with provided kit, complete fittingwith all fixing arrangementall as specifiedand directed by Engr-in-Charge. Make-Bajaj Cat No BZRSQL GZ1 36W CW or eqvt make of PHILIPS/WIPRO/CG |
| 41 | Supply and fix modular White cover plate with frame, 1 module Make : MK/ CRABTREE / L & T /LEGRAND/roma |
| 42 | supply and fix modular white cover plate with framebut 2 moduleMake : MK/ CRABTREE / L & T /LEGRAND/roma |
| 43 | supply and fix modular white cover plate with framebut 3 module Make : MK/ CRABTREE / L & T /LEGRAND/roma |
| 44 | supply and fix modular white cover plate with framebut 4 module Make : MK/ CRABTREE / L & T /LEGRAND/roma |
| 45 | supply and fix modular white cover plate with framebut 6 moduleMake : MK/ CRABTREE / L & T /LEGRAND/roma |
| 46 | supply and fix modular white cover plate with framebut 8 moduleMake : MK/ CRABTREE / L & T /LEGRAND/roma |
| 47 | M&L for submain wiring alongwith earth wire with the following sizes of FRLSPVC insulatedcopper conductor single core cable , multistrandedon the surface recess through and including suitable size ofPVC casing and capping/PVC conduitwith its accessories all as specified and directed by Engr-in -charge for the following(a) 2x1.5 sq mm and 1x1.5 sq mm as earth wire |
| 48 | (b) 2x2.5 sq mm and 1x2.5 sq mm as earth wire |
| 49 | (c) 2x4.0 sq mm and 1x4 sq mm as earth wire |
| 50 | (d) 2x6.0 sq mm and 1x6 sq mm as earth wire |
| 51 | Supply & fix MCCB DB VTPN 4 ways,with metal double door ,IP -54 protection suitable for MCCB as incommer and MCB as out going, 415 volt 3 phase complete with appropriate size copper bus bar and neutral link confirming to cat part no-5077 50 of legrand complete including cutting chases to wall for fixing of DB and making good distrubed wall/surface all as required at site i.e directed by Engr-in charge.Make : LegrandOr eqvt make of ABB/Siemens/Merlin Gerin |
| 52 | S & F sheet metal enclosuresDB\"s 2 waySPNsingledoor suitable for 240 Vcompletefixed flush in wall including chases in wall for fixing DB and making good distributed wall surfaces to match with existing specification.Make :Legrand Or eqvt make of ABB/Siemens/Merlin Gerin |
| 53 | Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .Make :Legrand Or eqvt make of ABB/Siemens/Merlin Gerin |
| 54 | Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .Make :Legrand Or eqvt make of ABB/Siemens/Merlin Gerin |
| 55 | Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .Make :Legrand Or eqvt make of ABB/Siemens/Merlin Gerin |
| 56 | S & F MCB single pole (SP) 240 volt 06-40 amp for inductive loadconnected through cable lugs of suitable size complete all as directed and specified. Make:Legrand/ABB/Siemens/Merlin Gerin |
| 57 | S & F MCB single pole and neutral (SPN) 240 volt 06-40 amp for inductive loadconnected through cable lugs of suitable size complete all as directed and specified. Make:Legrand/ABB/Siemens/Merlin Gerin |
| 58 | S & F MCB Tripplepole (TP) 240 volt 40-63 amp for inductive loadconnected through cable lugs of suitable size complete all as directed and specified.Make:Legrand/ABB/Siemens/Merlin Gerin |
| 59 | S & FixMCB Triple pole and Neutral 415 volts, 63Amps, all as specified and as directed. |
| 60 | Supply and fixingSingle pole and nuetral enclouser with two pin and earthplug and socket complete with one single pole MCB with 240 V 20 AMPs.Make:Legrand/ABB/Siemens/Merlin Gerin |
| 61 | M & L for galvanised steel earthing complete with 60 cm x 60 cm x 6 mm thick galvanised steel earth electrode and 04 mmdia galvanised earth lead wire burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to earth lead 4.0 mm dia GI wire protected by 15 mm bore light grade galvanised iron pipe and other and connected to test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron wire mesh, charcoal and common salt in alternater of 15 cm complete thickness all around the GI plate electrode complete with earth pit PCC 1:3:6 type CI and RCC cover and necesary excavation and earth work in hard/dense soil and disposal of spoilto a distance not exc 50 mtr and necessary testing complete all as shown in electorical plate No 03 connected to earthing test point including following elements/works all as specified. |
| 62 | S&FixLED wall mountingLight fitting,14 watt, 230 volts, complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. all as specified & directed.Make :- HavellsCat Part No.LHFOECE1TZ1O014or equivalent model of WIPRO / Philips / Bajaj and Jaquar |
| 63 | Supply & fix LED 9W Tulip LED Bollard for 360 degree light with a modern look using new generation technology in LED to direct light,diffuser with IP 65 protection, resistance to impact and corrosion, glare free and better uniformity and as per site requirement of pcc 1:2:4 foundation to installed Bolladd light fitting in the garden all as directed and specified.Make: BajajModel No: BGBOM 650 9W LED WW or equivalentin Wipro /Havells. |
| 64 | Taking down carefully after disconnecting electrical/water supply connections and transporting to the work shop for carry out the servicing / over hauling of the storage type electric water heaters (Geysers) of storage capacity 25 / 50 litres of any make / type by cleaing the inner surface of the tank / heating element with chemical to remove the scaling / rust & reassembling the same after replacing burnt out parts and refixing on its original position including testing complete all as directed. |
| 65 | Supply & replace heating element of the following ratings as required at site including rubber washer/packing.Make : \"RACOLD/THEETA / SWARNA or equivalent ISI marked. (a) 1.5/2 KW |
| 66 | (b) 3 KW |
| 67 | Supply & replace thermostat stem type suitable for geysers 25 / 50 litres.ISI marked. |
| 68 | Supply & replace 15 mm Heavy duty connecting pipe with two brass adaptors 18 \" long &fixing in position fir cold & Hot water/inlet connection. |
| 69 | Supply & fix in replacement Gun metal Non-Return valve 15mm dia complete all as specified. |
| 70 | Supply & replace indicator lamp rectangular / round type suitable for 25 / 50 litres geysers. |
| 71 | Supply and fix in repair pressure release valve 15mm dia complete all as specified. |
| 72 | Material & labour for painting of storage type water heater any capacity (25/50 litres) after preparation of surface and applying two coats of synthetic enamel paint, white externally complete all as specified. |
| 73 | Taking down the defective ceiling fan of any sweep andmake after disconnecting electrically & mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:-(a)Servicing/overhauling the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing. |
| 74 | (b)Re-winding the burnt/short circuited winding with same guage supper enameled copper wire to maintain speed at load. |
| 75 | ( c)Painting of ceiling fan by applying one coats of synthetic enamel paint after preparation of surface complete. |
| 76 | Taking down the repairable exhaust fan of 300 MM / 380 MM sweep, any make, single phase, 230 volts, 50 hz, AC after disconnecting electrically and mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:-(a) Servicing/overhauling the exhuast fan by thoroughly clelaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the resistance value. |
| 77 | (b) Re-winding the burnt/shourt circuited winding with same cauge supper enameled copper wire to maintain speed at load. |
| 78 | (c)Painting of Exhaust fan by applying one coat of synthetic enamel paint after preparation of surface complete. |
| 79 | Supply & replace ball bearings for exhaust/ceiling fan of any sweep. Make : SKF/NBC/FAG |
| 80 | Supply & replace GUN METAL BUSH for exhaust / ceiling fan of any sweep. |
| 81 | Supply and fix in repairs fan condenser of following sizes :-(a) 2.5 mfd |
| 82 | (b) 4 to 6 mfd |
| 83 | Supply anf fix in repair rubber reel, nut bolts, washer, split pin complete set by dismantling existing u/s are as specified. |
| 84 | Supply & Fix ceiling fan down rod of MS pipe 15mm bore 1/1.2 Mtr length including cutting/threading making tide for fixing providing check nuts wachers etc complete. |
| 85 | To facilitate in attending Electrical complaint of internal electrification in residential area of DIAT (DU) and MILIT with qualified two electrician ,one for DIAT(DU) area and one electrician for MILIT area including carrying out following nature of job all as specifide and directed by Engr -in - charge. (a)To attend any type of no light complaint.(b) Replacement of UNSV switches /sockets/switch socket combination of 6A/16A as per site requirement.(c) Replacement of defective /UNSVMCBs/MCCBs/in DBs as directed.(d) Replacement of defective /UNSV/tube light fittingany size, ceiling fitting recessed /surface etc.(e)Replacement of fused tube rods /CFL/LED light fitting any type and any capacity.(f) repair to ceilingfan /exhaust fan /wall fan incl replacement of condensor etc and making it functional. (g) Checking and repairing of switch boards removing short circuit if anyand replacement of bunt wires etc.(h) Replacement of broken switch board any type and any size.Note- (i)Two electrician from 0900 to 1700 Hrs. (ii) Electrician shall be employed on all working day s incl sunday and holidays.(iii)Theelectrician who is on duty must be provided with with common mobile cell to facilitate andrender good services to the users and the same shall be deemed to be included in the unit rate.(iv) Complaint slip to be collected daily from complaint cell and same shall be returned to the complaint cell on copletion cell on completion of job.(v) All relevent norms and IE rules provision shall be adhered while working on electric circuit and necessary protective devices and tools required shall be inclusive of the provision and the same shall be deemed to be included in the unit rate.(vi) Contractor shall provide all tools required for attending with proper tool bag.(vii) Any emergency LT ffault shall be rectified as direction of Engr-in-charge/JE E/M.(viii) If individual remains absent on site, contractor shall make an alternative arrangement . if contractor fails to make such arrangement recovery shall be made at double the quoted rate as specified in Sch A. |
| 86 | supply only PVC Aluminium service cable twin core 6 sq mm weather proof |
| 87 | Supply only insulation tap size 2.5cmX25Mtrx125mm. |
| 88 | Supply only call bell (Ding Dong) 240V,50 Hz |
| 89 | Supply only Bell push flush type SP 5 Amps |
| 90 | Supply only lamp holder pendant/angle type insulated body with back plate all as all respect all as specified and directed by Engineer-in-Charge. |
| 91 | Supply only stepped type elctronic fan regulator 240 V 50 HZ , 100Watts flush type suitable for 1200/1400mm sweep ceiling fan complete |
| 92 | Supply only switch piano 5/6 amps. |
| 93 | Supply only Switch socket combination 6 amp 3/5 pin. |
| 94 | Supply only Switch socket combination15 amp 3/5 pin . |
| 95 | Supply only switch modular 6A |
| 96 | Supply only switch modular 16A |
| 97 | Supply only Socket 6 amp 5 pin modular type. |
| 98 | Supply only Socket 16 amp 5 pin modular type. |
| 99 | Supply only of size Screw 35/60 mm |
| 100 | Supply only PVC Box of size 7\" x 8\" |
| 101 | Supply only PVC Box of size 4.5\" x 3\" suitable for 15 amp switch-socket |
| 102 | Supply Only Casing Caping of size 20 mm, ISI marked |
| 103 | Supply only LED bulb /lamp 7 watts make Havells/bajaj/cropton |
| 104 | Supply only LED bulb /lamp 9 watts make Havells/bajaj/cropton |
| 105 | Supply only LED bulb /lamp 14 watts make Havells/bajaj/cropton |
| 106 | Supply only 18 watt LED Batton fitting Make Bajaj cat part no BLRB-DB 118 or eqvt in wipro/Havells/cropton. |
| 107 | Supply only 18 watt LED Tube Rod Make Bajaj cat part no BLRB 18w CW or eqvt in wipro/Havells/cropton. |
| 108 | Supply only 10 watt LED Light fitting Bajaj cat part no BCLRB 10 WH or eqvt in wipro/Havells/cropton. |
| 109 | Supply only surface mounting round downlight LED 12 w luminarie complete fitting Make Bajaj Cat No BGSLO sleek surpace 12 WH RD or eqvt wipro/Havells/PHILIPS |
| 110 | M&L for taking down carefully after disconnecting electrical / water supply connections of solar water heating system,cleaning of storage water tank, checking of inlet/out let 20mm BSP , SS nipples, wind protection, rubber seal,sealing vaccum glass tube,ABB caps,MS powder coated rack, and stand steel aluminium structures for vaccum glass tube bottom, heating elements, rubber washer and reassembling the same after replacement of parts and complete connection of electric and water in their original position including testing complete all as specified. |
| 111 | Supply & fix in replacement of sealing vaccum glass tube |
| 112 | Supply & fix in replacement of 20mm BSP SS nipples |
| 113 | Supply & fix in replacement of rubber seal and ABB caps |
| 114 | To attend any brake down of the summer appliances i.e. split type AC, window type AC , cassete type AC, water coolerand aquaguard of any capacity or make/model/ year if manufacture, installed at DIAT complex as and when required during working /non working hours all as directed by the Engineer-in-charge.Note:- (i) Spares will be measured and paid separately under relevant item (ii)Complaint if not attended with in 24 hours after receiving complaint, penalty will be recovered at double the rate quoted by the contractor |
| 115 | Taking out carefully existing defective sealed compressor of Split type AC 1.5/2 ton capacity by dismantling the same, supply and fixing new sealed compressor as per existing model and make including bracing, leak testing, vacuuming charging the oil, refrigerant as required to maintain design grill temperature, testing and commissioning in all respect all as specified and directed by Engineer-in-Charge. |
| 116 | All as per item No 147above but for split type AC 1.5 / 2 ton capacity. |
| 117 | All as per item No 96 above but for storage type water cooler of 40 liters capacity. |
| 118 | All as per item No 96 above but for storage type water cooler of 60/150 liters capacity.Note for item No 96 to 99 :- (i)The defective compressor has to be handed over to MES Store. Contractor has to submit certificate issued by dealer for guarantee up to one year including performance of cooling efficiency for new compressor.(ii) Rate quoted deemed to include the cost of compressor oil for topping up and refrigerant.(iii) Spares will be measured and paid separately under relevant items. |
| 119 | M&L for taking down the existing defective fan/ blower motor and transporting to the work shop and dismantled burnt motor, removing the burnt winding & rewinding with super enameled copper wire of suitable size and gauge & replacement of unserviceable bearing of motor of following :-(a) Fan motor (two speed i.e low & high) for window typeAC 1/5 HP. |
| 120 | (b) Condenser fan motor for water cooler 1/6 HP capacity |
| 121 | (c) Condenser fan motor for split type AC unit condensing unit /out door unit) |
| 122 | (d) Blower fan motorfor split type AC unit (indoor/cooling unit)Make :-USHA/ASIAN/TESLA/KELTRON/NEIL |
| 123 | Supply in repairs capacitors of following capacity:-(a) Capacitors 80-100/120 Mfd |
| 124 | (b) Capacitor 36 Mfd |
| 125 | (c) Capacitor 45-65 Mfd |
| 126 | (d) Capacitors 10-25 MfdMake :-USHA/ASIAN/TESLA/KELTRON/EPCOS |
| 127 | Disconnecting and taking out the defective split type AC 1.5/2.0 ton capacity remote circuit complete and supplying and fixing new remote circuit (PCB) as per existing make/model complete all as specified and directed by Engineer-in-Charge. |
| 128 | Removing the damaged PUF insulation of suction pipe and supplying and fixing new thermal sleeve insulation for suction line including providing hard plastic tape over the thermal insulation for split type AC 1.5/2.0 ton capacity etc complete all as directed by Engineer-in-Charge. |
| 129 | Supply and fix in replacement overload protectors relays for the following:-(a) Water cooler |
| 130 | (b)Window type AC |
| 131 | ( c) Split type AC |
| 132 | Taking out defective fan blade and supplying and fixing new blades for water cooler of 40/80/100 liters capacity complete all as directed by Engineer-in-Charge |
| 133 | Taking out defective push cock and supplying and fixing new push cock chromium plated brass, 15 mm bore of approved make for water cooler complete all as directed by Engineer-in-charge. |
| 134 | Taking out old PVC conduit condensation water pipe20mmdia from indoor unit to ground floor by using new PVC conduit ISI mark condensation water pipe 20mm dia, fixing/laying on wall by using clamps and insert into wall by making hole and grouting with cement mortar complete all as specified and as directed by Engineer-in-Charge. |
| 135 | Taking down old metallic socket neutral enclosures single pole with 2 pin and supply and fixing, new single pole and neutral enclosure with 2 pin and earth plug socket complete with one SP MCB-240 volts, 32 amps fixed on sheet metal encloser complete all as specified and directed by Engr-in-Charge. |
| 136 | Taking down window type AC of any capacity / make/ model from existing position and carry out the servicing by cleaning the unit with water, tightening the terminal connections to avoid loose connections, applying the oiling/greasing to fan motor, bearings all as specified for smooth running including cleaning the air filter/check the thermometer setting etc. and directed by Engineer in charge. |
| 137 | All as per item No 110 bove but for split type AC 1.5-3.0 ton capacity. |
| 138 | Taking down from existing position storage type water cooler of any capacity and make and servicing the same by cleaning of water tank, cleaning condensing unit by hand blower and including supply and replacement of damaged aluminium hinges, wiring with PVC insulated copper wire of same gauge, PVC drainpipe 25 mm dia, 1.5 m length, servicing/oiling/greasing of condenser motor with supply and replacement of mounting rubber bushes, tightening of all loose parts, contacts, wiring, nuts, bolts,complete including re-fixing in original position, testing and commissioning to the entire satisfaction of Engineer-in-Charge. |
| 139 | Supply and fix in replacement of relay suitable for water cooler. |
| 140 | Supply and fix in replacement of relay suitable for split type AC of any capacity.Make :- USHA/SHRIRAM/ ANNAPURNA |
| 141 | Supply and fix in replacement of air filter pad for window type |
| 142 | Supply and fix in replacement of outer casing for window AC 1.5 TR. |
| 143 | Supply and fix in replacement of front grill for window AC ofsuitable size/ shape / modelas required at site. Make :-VOLTAS / LG |
| 144 | Supply and fix in replacement of auto cut thermostat for window type AC / split type AC. |
| 145 | Supply and fix in replacement of auto cut thermostat for water cooler. |
| 146 | Supply and charging / topping up refrigerant R-404,R-134Ato window type / split type AC as directed by Engineer-in-charge. |
| 147 | Supply and charging / topping up oil to window type / split type AC and Water cooler compressorsas directed by Engineer-in-charge. |
| 148 | Detecting of gas/refrigerant leakage in the system by pressure testing withnitrogen gas and rectifying the same by brazing if required replace the copper tube as required and vacuumising, recharging of refrigerant F-22 /F-12/Refron/Mafron as recommended by manufacture to maintain the design grill temperature by testing & commissioning including changing of compressor oil (CAPILA-D) for window type AC 1.5/2 TR capacity complete all as specified and directed by Engineer-in-Charge. |
| 149 | All as per item No 126 here in before but for split type A/C 1.5/2/3 TR capacity. |
| 150 | All as per item No 126 here in before but for water cooler any type/capacity. |
| 151 | Supply and charging / topping up refrigerant R-134 to water cooler as directed by Engineer in charge. |
| 152 | M&L for painting out door unit of 1.5/2.0/3.0 Ton capacity split type A/C by one coat of spary painting using super enamel paint over one coat of anticorrosive primer including preparation old surfaces by scraping etc complete all as specified and directed by Engineer-in-Charge |
| 153 | Taking down the defective voltage stabilizer 5/4 KVA, carry out the repair by replacing the unserviceable parts & refixing the same including testing.(a)Volt meter (As per sample) |
| 154 | (b) Indication lamp |
| 155 | (c)PCB |
| 156 | (d) Transformer rewinding |
| 157 | Repair / servicing and overhauling to aqua guard of any type and capacity, cleaning paper carbon filter pipes etc including replacement of worn out parts like paper filter carbon, filter solenoid valve, water pump etc all as directed by Engr-in-Charge.Note : Spare parts replaced will be measured and paid separately under respective items. |
| 158 | (a) Micro carbon filter Make : Aqua guard |
| 159 | (b) Primary paper filter. |
| 160 | (c)Water solenoid valve. |
| 161 | (d)Outlet / Inlet pipes. |
