Installation Of Biomass Briquette Pellet Charcoal Machine Giving Benefits To Besiding Grampanchyat At-Sahan, Tal- Alibag Dist-Raigad ( 2Nd Call ) Installation Of Biomass Briquette Pellet Charcoal Machine Giving Benefits To Besiding Grampanchyat At-Sahan, Tal- Alibag Dist-Raigad ( 2Nd Call ) , Part A :- Civil Work For Shade Item No.1:- Excavation For Foundation / Pipe Trenches In Hard Murum Including Removing The Excavated Material Upto A Distance Of 50 M And Lifts As Below, Stacking And Spreading As Directed By Engineer-In-Charge, Normal Dewatering, Preparing The Bed For Foundation And Excluding Backfilling, Etc. Complete. ( Bd- A-2 / 259 ) , Item No.2:- Providing Dry Trap / Granite / Quartzite / Gneiss, Rubble Stone Soling In 15 Cm To 20 Cm Thicklayers Including Hand Packing And Compacting, Etc. Complete. ( Bd-A-12 / 264 ) , Item No.3:- Providing And Laying In Situ Cement Concrete M-15 Of Trap / Granite / Quartzite / Gneiss Metal For Foundation And Bedding Including Bailing Out Water, Form Work, Compaction, Curing, Etc. Complete. ( Cement 5.90 Bags / Cum ) M-15 , Item No.4:-Providing And Cutting Bending, Hooking, Laying In Position And Tying Hcrm / Crsfor Reinforcement As Per Detaileddrawingsforr.C.C.Worknote:Whereitemno34 ( C ) Consideredinestimate, Anticorrosive Treatment Shall Not Be Considered Additionaly. Hcrm : High Corrosion Resistance Marine. Crs : Corrosion Resistance Steel. , Item No.5:-Providing And Laying In Situ Cement Concrete Of Trap / Granite / Quartzite / Gneiss Metal For Rcc Work In Foundation Like Raft, Grillage, Strip Foundation And Footing Of Rcc Columns And Steel Stanchions Including Normal Dewatering, Form Work, Compaction, Finishing And Curing, Etc. Complete. ( By Weigh Batching And Mix Design For M250 And M-300 Only. Use Of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, Etc. Cement Is Permitted. ) ( Excluding M.S. Or Tor Reinforcement ) , Item No.6:-Filling In Plinth And Floors / Trenches Withcontractors Murum For Bedding In 15 Cm To 20 Cm Layers Including Watering And Compaction, Etc. Complete. ( Bd-A-11 / 263 ) , Item No.7:-Providing And Casting In Situ Cement Concrete Of Trap / Granite / Quartzite / Gneiss Metal Of Approved Quality For Rcc Works As Per Detailed Drawings And Designs Or As Directed By Engineerincharge Including Normal Dewatering, Centering, Form Work, Compaction, Finishing The Formed Surfaces With Cm 1:3 Of Sufficient Minimum Thickness If Special Finish Is To Be Provided And Curing, Etc. Complete. ( By Weigh Batching And Mix Design For M-250 And M-300 Only. Use Of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, Etc. Cement Is Permitted. ) ( Excluding M.S. Or Tor Reinforcement ) M-25 For All Types Of Columns , Item No.8:-Providing And Casting In Situ C.C. Of Trap Granite / Quartzite / Gneiss Metal Of Approved Quality For Rcc Works As Per Detailed Drawings And Designs Or As Directed By Engineer-In-Charge Including Normal Dewatering, Centering, Form Work, Compaction, Finishing The Formed Surfaces With C.M. 1:3 Of Sufficient Minimum Thickness To Give A Smooth And Even Surface Wherever Necessary Or Roughening If Special Finish Is To Be Provided And Curing, Etc. Complete. ( By Weigh Batching And Mix Design For M-250 And M-300 Only. Use Of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, Etc. Cement Is Permitted. ) ( Excluding M.S. Or Tor Reinforcement ) For Beams / Braces / Lintels , Item No.9: Providing Secondclass Burnt Brickmasonry With Conventional / I.S. Type Bricks In Cement Mortar1:6In Superstructure Including Striking Joints, Raking Out Joints, Watering Andscaffolding Etc. Complete , Item No 10- Providing Internal Cement Plaster 12Mm Thick In Single Coat In Cement Mortar 1:3 Without Neeru Finish To Concrete Or Brick Surfaces, In All Position Including Scaffolding And Curing Etc. , Item No.11:-Providing Internal Cement Plaster 20Mm. Thick In Single Coats In Cement Mortar 1:3 Withoutneeru Finish, To Concrete, Brick Surface, In All Positions Including Scaffolding And Curing Etc. Complete. , Item No.12.:- Providing Structural Steel Work In Trusses, Other Similar Trussed Purlins And Members With All Bracing, Gusset Plates, Etc. As Per Detailed Design And Drawing Or As Directed By Engineer-Incharge Including Cutting, Fabricating, Hoisting, Erecting And Fixing In Position, Making Riveted / Bolted / Welded Connections And One Coat Of Anticorrosive Paint And Over It Two Coats Of Oil Painting, Etc. Complete. ( Bd-C-8 / 278 ) , Item No.13:- Providingand Fixing 6.00Mm Thick Isi Mark Asbestos Cement Corrugated Shee Troofing Including Galvanised Ironjorlhookbolts Galvanised Iron Band Bituminous G.I.Washers, Galvanised Iron Clamps, Bolts, Nuts And Scaffolding Etc. Complete. , Item No.14:- Providing Andfixing 6Mm Thick Isi Mark Asbestos Cement Ridge Capping For Roofing Including Galvanised Iron Hooks, Bolts, Galvanised Iron And Bituminous Washers, Galvanised Iron Clamps, Bolts, Nutsincluding Scaffolding Etc. Complete. , Item No.15:- Providing And Applying Anti Peel Paint Of Approved Make & Approved Brand Exterior Emulsion Paint Of Approved Quality, Colour And Shade Tooldand New Surface In Two Coats, Including Exterior Acrylic Primer Coat, Scaffolding, Preparing The Surface Etc. Complete ( Heatreflective , 1 ) For Cement - Soundness Test, Initial And Final Setting Time , Part B- Plant And Machineryitem No.1 :- Combo Machine To Produce Biomass Peller / Briquette Charcoal Machine Set Up With Loading Hopper And Mixer And Cooling Conveyer With Material Loading Silo And Conveyer System.Machine Should Produce Sizes Of Diameter From 8 Mm To 100 Mm Diameter Or Diagonally For Quadratic Shape / Irrespective Of Length, Along With Hydraulic Power Pack With Plate Type Oil Cooling And High Pressure Filtering System With All Sub Machinery With Have Permanent Shed 50Mtr X 30Mtr Area For Operation , Item No.2:- In House Mobile Shredding / Threshing Machines / Wood Chipper , Item No.3:- Integrated Grinding System With Inert Separation With Dust Suction System And Filtering And Conveyer System.For Input And Out And Silo For 4 Tons Loading , Item No.4:- Integrated Rotary Drum System With Automatic Temp Control With Conveyer System For Input And Output With Material Handling Unit , Item No.5:-Weighbridge With Software And Recording Digital Type , Item No.6:- Providing & Errecting Commissioning Of Single Gurder Electrical Oprated 5.00 Ton Capicity Crane Eot Crane 5 Mt, 10 Mt Span , Item No.7:-Front End Loader & Agro Waste Handling Equipment ( Min 75 Hp ) With Tracker , Item No.8:-Bomb Calorimeter Automatic , Item No.9:-Steam Generator 16 Kw , Item No.10:-17 Hp 175Psigcompressor With 500 Liters Air Tank Having 1000 Liters Capicty , Item No.11:-Moisture Measurement Equipments , Item No.12:-Ash Content Measurement Equipment With Automatic Detection , Item No.13:-Computer / Printer With Wifi And Gsm Connection , Item No.14:-Video Surveillance System In Factory, Office And Weigh Bridge Designing, Supplying, Installing Testing & Commissioning. , Item No.15:-Tools, Fixtures And Devices For Maintenance , Part C:- Electrical Work Item No. 1- Supplying And Erecting 250 Kvar, 3 Phase, 50 Hz., Capacitor Dutycontactor With De-Latching Mechanism Microprocessor Apfccontroller With Mpp / App Type Capacitor With 525 V And Havingminimum Overcurrent Capacity Of 1.8 In, Peak Inrush Current Capacity300 In And Minimum Life 150000 Hours With , Consisting Of Suitablesteps Of Mpp / App Type Capacitor Units With Detuned Aluminiumfilter 7% Reactors With Circuit Breaker As Main Incomer And Mccb Foreach Branch Protection, As Per Specification No Cp-Ed / Apfc Dsr Ino 6-7-22 , Item No2:- Supplying Anderectingrolledsteel Joist ( Girder ) Pole 150X80 Or 150 / 75Mm. ( 14.9 Kg / Metre ) With Base Plate In Provided Foundation As Per Specification No. Oh-Pl / Rsj Dsr Ino 8-1-9 , Item No.3:- Supplyinganderectingallaluminiumstranded Conductors7 / 2.21Mm.Complete. ( Gnat ) ( 73.77 Kg Perkm ) As Per Specification No. Oh-Con / Aac Dsr Ino 8.5.2 , Item No.4:-Supplyinganderectingallaluminiumstranded Conductors7 / 3.10Mm. Complete. ( Ant. ) ( 145.0 Kg Perkm ) As Per Specification No. Oh-Con / Aac Dsr Ino 8-5-5 , Item No.5:- Supplyinganderectingporcelainshackletypelt Medium Insulator 75X115 Mm. Dia. With G.L. Strips, Nuts And Bolts, Complete Dsr Ino. 8-6-2 , Item No.6:-Supplying And Erecting G.L. Stay Set For Poles, Including Loop Insulators Atinaccessibleheightcompletewith Anchorplate 300X300x6mm., Straining Screws, G.L.Stay Wire 7 / 10 Swg, G.L. Stay Rod 20 Mm X 1.8 Meter Length And Poleclampsduly Erected In Providedcement Concrete Foundation Dsr Ino 8-7-1. , Item No.7:-Supplyinganderectingpoleclamp Madefrom50 X 10 Mm.M.S. Flat For Pole Or Pipe, Postcompleteerected With 15 Mm. Bolts And Nuts, Complete Duly Painted With One Coatofredoxideandtwocoatsofaluminium Paint Dsr 8-7-11 , Item No.8:-Supplying And Erecting M.S. Pole Bracket, Fabricate Fromangleiron75x40x6mm.And 1100Mm.Long For 4 Insulators, Complete As Per Spec No.Oh-Pl / Bkt Dsr Ino. 8-4-8 , Item No.9:-Supplying And Erecting Pipe Type Earthingwith Gi Pipe Complete With All Materials, Testing & Recording The Results Asper Spe No. Ea-Epdsr Ino.9-1-4 , Item No. 10:-Supplying & Erecting End Pole D. P. Structure For 11 / 0.415 Kv, 200 Kva Transformer With R.S.J. Pole 2 Nos. Of Size 100Mm X 116Mm X 11 M Long With Suitable Distribution Box Of C.R.C.A. Sheet 16Swg With 4 Pole Mccb 300 Amps As Incomer & 6 Nos.100 Amps Kitkat / Mccb For Outgoing Circuits. Transformer D.P. Structureincludes The A. B. Switch 200 Amps, D.O. Fuse Set & L.A. Set. 2 Nos.Top Channel Of Size 100 Mmx 50 Mm For Erection Of A.B. Switch &2 Nos. Base Channel Of Size 100 Mm X 50 X Mm For Erectingtransformer. Channel Of Size 75 X40 Mm For Erecting D.O. Fuse Set, L.A., A.B. Switch Handle Etc. Angle Of Size 50 X 50 X6 Mm For Erectingdistribution Box, Transformer Belt Etc. As Per Drawing ( Min. 124 Kg.Iron Work ) With Necessary Clamps, Nut-Bolts, Vee Cross Arm, Top Clip, Insulators Etc. Complete With Caution Board & Barbed Wire. D.P.Structure Shall Be Erected In C.C. Foundatin Complete Dsr Ino 8-4-26 , Item No.11:-Supplying, Installing, Testing & Commissioning Watts 3 Phase, 22 / 0.433 Kv, 50 Hz., 500 Kva, Oil Immersed And Naturallycooled Outdoor Type, Copper Wound Transformer, Delta / Starconnected With Additional Neutral Brought Out On Load Sidetemperature Rise Should Not Exceed 40Oc By Thermometer In Oil And 45Oc By The Resistance In Winding At Full Load Rating, With Hv Tapping ( With Off Load Tap Changer ) Off Load +5 To -10 In Steps Of 2.5%, Withstandard Accessories Complete With Test Certificate With Losses Below 1586 Watts At 50% Load, 4515 Watts At 100% Load As Per Is:1180 -2014 Energy Efficiency Level Ii With Necessary Permissions Of Electrical Inspector, As Per Specification No Ss- Trdsrino. 10-1-16 , Item No.12:-Supplying, Erecting, Testing, Commissioning 11 Kv Ht Meteringcubical ( Compact Type ) Approved By Msedcl / Licenseefabricated With 2 Mm ( 14 Swg ) M.S. Sheets With Supporting Angleand Channel, Painted With Powder Coating / Epoxy Paint Of Requiredshade Copper Bus Bar Size 25X6 Mm Electronic Security Lock And Heavyduty Mechanical Lock, With Counter Meter For Measuring No Of Timesthe Opening Of Doors, Top Side Cover ( Ct, Pt Cover ) Interlock Withmeter Doors, Epoxy Coated 3 Nos Ct Having Required Ratio Between75 / 5 A To 100 / 5 A, Va10, Class0.2S, 11000 / V3 / 110 / V3 Va 50, Class0.2 Epoxy Terminal Block Suitable For Provided Trivector Meter, And Provision For Incoming And Outgoing Cables Etc. Complete Dulytested By Licensee With Necessary Test Certificates And Erected Onprovided Plinth / Cc Foundationdsr Ino. 1-9-27 , Item No.13:-Supplying, Erecting & Terminating Xlpe Armoured Cable 2 Core 10Sq. Mm. Aluminium Conductor With Continuous 5.48 Sq. Mm. ( 12Swg ) G.I. Earth Wire Complete Erected With Glands & Lugs, On Wall / Trusses / Pole Or Laid In Provided Trench / Pipe As Per Specification No.Cb-Lt / Al Dsr Ino. 7-1-6 , Item No.14:-Supplying, Erecting & Terminating Xlpe Armoured Cable 3½ Core25 Sq. Mm. Aluminium Conductor With Continuous 5.48 Sq. Mm. ( 12 Swg ) G.I. Earth Wire Complete Erected With Glands & Lugs, Onwall / Trusses / Pole Or Laid In Provided Trench / Pipe As Per Specification No. Cb-Lt / Aldsr Ino. 7-1-15 , Item No.15:-Supplying, Erecting & Terminating Xlpe Armoured Cable 3½ Core 50Sq. Mm. Aluminium Conductor With Continuous 5.48 Sq. Mm. ( 12 Swg ) G.I. Earth Wire Complete Erected With Glands & Lugs, Onwall / Trusses / Pole Or Laid In Provided Trench / Pipe As Per Specification No. Cb-Lt / Aldsr Ino. 7-1-17 , Item No.16:-Supplying, Erecting & Terminating Xlpe Armoured Cable 3½ Core 95 Sq. Mm. Aluminium Conductor With Continuous 8.35 Sq. Mm. ( 10 Swg ) G.I. Earth Wire Complete Erected With Glands & Lugs, Onwall / Trusses / Pole Or Laid In Provided Trench / Pipe As Per Specification No. Cb-Lt / Aldsr Ino. 7-1-19 , Item No.17:-Supplying, Erecting & Terminating Xlpe Armoured Cable 3½ Core 150 Sq. Mm. Aluminium Conductor With Continuous 12.97 Sq. Mm. ( 8 Swg ) G.I. Earth Wire Complete Erected With Glands & Lugs, Onwall / Trusses / Pole Or Laid In Provided Trench / Pipe As Per Specification No. Cb-Lt / Aldsr Ino. 7-1-21 , Item No.18:-Supplying, Erecting & Terminating Xlpe Armoured Cable 3½ Core 300Sq. Mm. Aluminium Conductor With Continuous 12.97 Sq. Mm. ( 8 Swg ) G.I. Earth Wire Complete Erected With Glands & Lugs, Onwall / Trusses / Pole Or Laid In Provided Trench / Pipe As Per Specification No. Cb-Lt / Aldsr Ino. 7-1-24 , Item No.19:-Making Trench In Softsoil Of Suitable Width And Depth For Laying Provided L.T Cable Up To 10 Sq.Mm.Complete.As Per Specification No. Cw-Exn-Ctr Dsr 16-1-1 , Item No.20:-Excavating Soft Murum / Soft Soil Road By Chiselling For Preparingpit For Poles Stay Or Earth Plates Or For Laying Cables, Pipes & Clearing The Site By Removing Debris & Making The Site Good Complete Dsr 16-1-7 , Item No.21:-Providing & Erecting 6 M High ( Clear Height ) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 130 Mm A / F, Top 70 Mm A / F On Provided Foundation As Per Spe Ohpl / Opl Dsr Ino 8-3-13 , Item No.22:-Making M- 20 Grade Reinforced Cement Concrete Foundation Byconsidering The Safe Soil Bearing Capacity At Site As 10 T / Sq.M At 1.5 M Depth Including Supply Of Steel, Concrete, Excavation And Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete ( For 6M To 8M High Octagonal / Conical Gi Pole ) . Dsr Ino 16-3-9 , Item No.23:-Providing And Erecting Galvanised 1000Mm Single Arm Sword Typebracket With Frp Dome And Ball As Per Specification No. Ohpl / Pbkt Dsr Ino.8-3-30 , Item No.24:-Supplying Anderecting Aproved Type Led Street Light 75-90Watt Having Pf>0.95 Class Ip 65 Or Above Housing Pressure Diacast Alluminium Alloy And Heat Sink Extruted Alluminiumas Per Specification No.Fg-Odf / Fls2dsr Ino. 2-5-7 , Item No.25:-Supplying & Erecting Mains With 2X1.5 Sq.Mmf.R. Stranded / Solid Copper Pvc Insulated Wire Laid In Provided Conduit / Trunking / Inside Pole / Bus Bars Or Any Otherplaces .Wg-Ma / Bw Dsr Ino 1-3-1 , Item No.26:-Supply And Erecting 9M ( Clear Height ) Fixedtype High Mast ( Top-100Mm, Bottom- 200Mm ) With Hexagonal / Round Bracket And Foundationbolts Suitable For Max. 4Nos Floodlight Fixtureson Provided Foundation As Per Specino. Oh-Pl / Opl ( Excluding Luminaries ) . Dsr Ino 8-3-8 , Item No.26:-Making M- 20 Grade Reinforced Cement Concrete Foundation By Considering The Safe Soil Bearing Capacity At Site As 10 T / Sq.M At 1.5 M Depth Including Supply Of Steel, Concrete, Excavation And Xingprovided Nut Bolts With The Help Of Template, Duly Plastered As Perdesign Complete ( For 9M & 10M High Octagonal / Conical Gi Pole ) .. Dsr Ino 16-3-10 , Item No.27:-Supplying And Erecting Led Flood Light Fitting Of 150 W, Including Lamp, With Pf > 0.95, Class Ip 65 And Above Housing Of Pressuredie Cast Alluminium Alloy And Heat Sink Extrudedalluminium Complete Per Specification No Fgodf / Fls Dsr Ino2-5-10 , Item No.28:-Supplying & Erecting Conventional Spike Type Air Termination Suitable To Carry Lighting Stroke Made Up Of Heavy Gauge 40 Mm Dia Copper Pipe Of Standard Length With 5 Nos Copper Spike Fixed On Copper Ball As Air Terminal Duily Threaded In Copper Pipe Erected On Provided Foundationdsr Ino 9-3-1 , Item No.29:-Supplying And Erecting Aluminium Strip Of Required Sizes Usedfor Earthing On Wall And / Or Any Other Purpose With Necessaryaluminium Clamps Fixed On Wall Painted With Bituminous Paint In Anapproved Manner With Joints Required. As Per Specification No Eaep. Dsr Ino 9-2-6 , Item No.30:-Providing Earthing With Copper Earth Plate Size 30X30x0315cm Complete With All Materials, Testing & Recording The Results Asper Specification No. Ea-Epdsr Ino.9-1-1 , Item No.31:-Supplying And Fixing Pvc Synthetic Elastomer Electricallyinsulating Mat With Class B Insulation Conforming To Is: 15652 –2006 & Cpri Tested Having 2.5 Mm Thickness Upto 11 Kvdsr Ino. 10-2-29 , Item No.32:-Providing Pair Of Duly Tested Rubber Hand Gloves As Per Is:47705 Suitable For Working Upto 22 Kv Supply Completedsr Ino 10-2-23 , Item No.33:-Supplying & Erecting On Line Ups Pure Sine Wave Of 5 Kva Capacity Complete With Standard Features, Along Withnecessary Smf Batteries For 30 Mins Battery Backup, As Per Speno. Ap-Ups Dsr Ino 3-7-4 , Item No.34:-Supplying, Installing, Testing And Commissioning Of 2500Va Digital Pure Sine Wave Inverter Based On Insulatedgate Bipolar Transistor ( Igbt ) Technology Single Phase230v, 50 Hz Complete As Per Specification No. Ap-Inv ( Without Batteries ) Dsr Ino 5-6-4 , Item No.35:-Supplying And Erecting 12 V / 150Ah Tubular Battery Withbattery Terminal Wire, Duly Charged Complete With 36Months Warranty Completedsr Ino 5-8-4 , Item No.36:-Supplying And Erecting D.C.P. Type Fire Extinguisher 6 Kg Capacity Cartridge Type With Gun Metal Cap 150 Gram Co2 Gas Cartridge, Powder And Brackets Conforming To Is 2171-1985 / Is 15683 And Complete Erected With Necessary Clamps Made From 50X6 Mm M.S. Flat With Nuts & Bolts Grouted In Wall Complete.Dsr Ino 10-2-32 , Item No.38:-Supplying & Erecting Carbon Dioxide ( Co2 ) Fire Extinguisher Of 4.5 Kg. Capacity Cartridge Type Conform To Is 2878 / 15683 Complete Erected With Necessary Clamp Made From 50 X 6 Mm. M. S. Flat With Nut & Bolts Grouted In Wall Complete.Dsr Ino 10-2-34 , Gst Charges 12%
