Tender For The Work Electrical Works For Wiring Of Power Boards Lan Points/ Db’S And Other Items As Required In Electrical Engineering Department At Nit Warangal -1 Supply and fixing of 50mm X 50mm UPVC Mini Trunking along with External Angle / Flat angle / Internal angle/T joints/ end caps and fasteners in complete as required including labour charges etc., 2 Supply and fixing of 32mm X 12.5mm UPVC Mini Trunking along with flat angle and end caps including labour charges etc., 3 Supplying and drawing 2.5 sq. mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 4 Supplying and drawing 4.0 sq. mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 5 Supplying and drawing 6.0 sq. mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 4 X 6 sq. mm + 1 X 6 sq. mm earth wire 6 Wiring for circuit/ submain wiring alongwith earth wire with the 10 Sq mm of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 4 X 10 sq. mm + 2 X 6 sq. mm earth wire 7 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 6 amps modular socket outlet and 6 amps modular switch, connection etc. as required. 8 Supplying and fixing suitable size GI box with modular plate and cover in FRLSonton surface or in recess, including providing and fixing 6 pin 16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 9 Supply and fixing of 16A Triangle Plug Top. 10 Supplying and fixing 20 amps, 240 volts, SPN industrial type , socket outlet for AC Point with 1 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 11 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin,nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm,suitable for 230 V, 50 Hz, single phase AC Supply, meeting the specifications as per Guaranteed Technical Parameters. 12 Supplying and fixing 2 Module, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 13 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable 1 run in the existing surface/recessed steel/ PVC conduit as required. 14 Supply and fixing of Cat 6 RJ-45 information outlets including Single face plate. 15 Supplying and fixing 8 way (4 + 24), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16 Supplying and fixing of 8 way 4 way (4 + 12), Double door, Double door surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required . 17 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve,miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. 18 Supplying and fixing 63A rating, 240/415 volts, 10 kA, “C” curve,miniature circuit breaker suitable for inductive load of TP/FP in the existing MCB DB complete with connections, testing and commissioning etc. as required. 19 Providing and fixing 125 A and 36 KA breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 20 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 21 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
