Supply Of Disaster Equipments Supply Of Disaster Equipment For Ssp Office, New Tehri , Supply Of Hardware And Pheripherals Items : , Remote Area Tower Lightspecifications:- Minimum 6000 Lumens, Weight Max 20Kg, Light Head Height Minimum 6 Feet, Mast Shall-Uttarakhand
TDR : 30490209
Tender Notice
Corrigendum Details
BOQ
Expired
Uttarakhand
Corrigendum : Supply Of Disaster Equipments Supply Of Disaster Equipment For Ssp Office, New Tehri , Supply Of Hardware And Pheripherals Items : , Remote Area Tower Lightspecifications:- Minimum 6000 Lumens, Weight Max 20Kg, Light Head Height Minimum 6 Feet, Mast Shall
Name of Work: < Supply of Disaster Equipments For SSP Office >
Sl. No.
Item Description
1
Supply of Hardware and Pheripherals Items :
2
Remote Area Tower LightSpecifications:- Minimum 6000 Lumens, weight max 20kg, Light head height minimum 6 feet, mast shall be 340 degree rotatable, Maximum runtime of different mode shall be minimum 22 hours, It should have indication for low battery & screen for time remaining for usage in different modes. Soft touch button shall be installed for brightness high to low, should have loops to carry as search light on shoulder. Battery shall be easy swappable or fixed.Test certificate should be submitted for lumens confirmation.
3
R.R. SAWSpecifications: - 1) Minimum 60 CC, 2 stroke petrol driven engine2) Air cooled engine3) RPM Min. 4000.4) Provision of wet cutting of materials by providing connection with water line.5) Accelerator lock for continuous use and safety inter lock must be provided.6) It should be capable of running minimum 14” Diablade.7) Minimum cutting depth = 100 mm.8) Fuel tank of capacity = Min. 0.8 Ltr9) Should be capable of cold manual pull cord start.10) Noise level should be less than 120 db in one Mtr around the equipment.11) Ignition = Electronic type.12) Should be provided with choke arrangement. 13) Machine holding handle should be rubber coated/robust coating providing cushion for getting good grip.14) Weight Not more than 15 kg with blade and full tank fuel.15) With rugged protective carry case.16) Rust proof.17) Accessoriesa) Diamond Tipped blades (Spare) carbide tip blade and abrasive blade.b) 5 liters fuel container.C) Pressure water tank with capacity of minimum 8 ltr with 5 Mtr (+-10%)rubber pipeD) Complete tool kit.
4
Diamond Chain Saw Specifications: -1. Diamond chain saw suitable for cutting reinforced concrete at least 300 mm thickness and with built in reinforcement up to 12 mm dia. Masonry bricks, natural stone or other similar Material.2. Engine 2 stroke petrol driven air cooled power shall be not less than 5 H.P.3.The starter shall be shielded from the dust & water. It shall have electronic ignition protected from water and single spring clutch proofed from water and concrete.4. Fuel capacity: Min 0.7 litre.5. It shall be fitted with diamond chain, which run over the 16” guide bar. 6. The water supply required by the chain while cutting shall not exceed 10lts/Min for cool & lubricate the chain and prevent concrete cutting dust.7. The chain saw shall also be provided with measures/Attachment for reducing the force required during cutting operation in order to reduce fatigue on operator.8. It shall also be provided with foam/cushion covered full wrap handles, momentary contract on off switch, water pressure gauge, 360 degree swivel hose connector, sprocket side cover and guard flap for operator safety.9. Weight: Not more than 12 kgs.10. Cutting rate: 10 to 25” per min or more.11. Noise level : Less than 110 dB @ 1 meterACCESSORIES:-1. A spare diamond chain.2. A min. 10 litre pressurized water container can capable to supply water to the equipment. 3. Heavy duty packaging box.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
