Bids Are Invited For Serviceability Checks/ Overhaul Of Electronic Equipment - (A) Clean Dust, Dirt And Moisture From The Internal And External Surface Of The Units. (B) Check Connectors For Proper Mating And Grounding. (C) Clean All Pcbs/ Modules And Check For Correct Functionality. Procure And Renew If Faulty.(D) Smps/ Power Supply Unit To Be Checked For Rated Input/ Outputs. Renew If Faulty.(E) Systems Having Software To Be Checked For Correct Functionality. (F) Check The Cable And Connectors For Cuts, Corrosion Or Undue Strain. (G) Clean The Air Filter With Vacuum Cleaner As Applicable.(H) Check The Set For Optimum/ Designed Performance And Reliability. (J) Replace The Defective Lamps/Caps/ Fuses/ Hinges/ Screws/ Knobs/ Keys/ Switches. (K) All Existing Shock Mounts / Base Plates / Foundations To Be Checked For Integrity And Renew If Necessary.(L)Renew All Earthing/ Bonding Straps. (M) Renew All Terminal Lugs(N) Renew Of Emi/ Emc Gaskets Of All Openings Of Equipment.(P)Interfacing To All Systems To Be Proved As Applicable.(Q) Carry Out All Annual Routines And Performances Tests As Per Maintop At Shop Floor , Post Overhaul/ Serviceability Checks - Post Overhaul /Repair/ Routines Following To Be Carried Out:-(A) All Systems/ Equipments/ Machinary Should Be Proved To Rated/Designed Power /Capacity Without Limitations /Observations And Trials To Be Offered To The Naval Trial Agencies For Design Specifications Along With Installation Inspections As Per Approved Wlds, Op Checks, Hats And Sats. (B) Any Unserviceability During Undertaking Above Serial Needs To Be Repaired / Renewed By Firm Inclusive Of Spares.(C)Vibration Levels At All Points Should Be Less Than 5 Mm/Sec.The Equipment Performance Will Be Considered Satisfactory Only If The Performance Trials Are Cleared By Naval Inspection Agency. (D) Present System For Hats And Sats As Per The Standards Of Watt. , Overhaul Of Antennas And Aerials - (A) Clean And Examine Whip And Wire Aerials For Pitting /Cavities, Replace All Defcetive Components. Apply Rf Paint To Antennas.(B) Check Insulation Of Wire Aerial, Value Should Be More Than 2 Mega Ohms,If Strands Are Cut/ Broken To Be Replaced.(C) Renew Porcelean Insulators Of Wire Aerial If Required.(D) Replace Insulator Of Antenna If Defective(E)Base Plate Of Antenna Is Corrodedto Be Manufactured And Fitted. (F)Work Includes Removal/Refitment Of Antenna. (G) Antenna Foundation Box Is Corroded,To Be Removed And New Box As Per Original Dimensions To Be Manufactured And Fitted/ Welded On The Respective Antenna Place. , 1 (Hf/Ssb Radio Set Prc 6020Bel Model: - Hf/Ssb Radio Set Prc 6020 Oems Local Representative : Bel Banglore Rating/Capacity: P/S 12 V Dc(Power O/P 25W))Overhauling Of Complete System As Per Sow 3. , 2 (Hf/Ssb Radio Set Prc 6020) - Overhauling Of Antenna As Per Sow 5 , 3 (Hf/Ssb Radio Set Prc 6020) - Post Overhaul/ Serviceability Checks As Per Sow 4. , 1 (Ek 896 Vlf/Hf Rx - Make : Bel Model : Ek 896 Vlf/ Hf Rx Oems Local Representative : Bel, Banglore) Overhauling Of Complete System As Per Sow 3. , 2 (Ek 896 Vlf/Hf Rx) - Overhauling Of Antenna As Per Sow 5 , 3 (Ek 896 Vlf/Hf Rx) - Base Structure Of Antenna At Port And Stbd Side Of Bridge Wings Perished, To Be Renewed (40X40x36cm, Mat -Ss For Each) , 4 (Ek 896 Vlf/Hf Rx) - Procure And Replace Cables And Connectors From Antenna (P & S) To Mco (Rf Cable Rg 213 60 Mtrs Approx ). The Job Involves Removing The Panels, Removing Existing Cables, Opening Deck Glands, Laying New Cable, Securing The Cable In The Cable Channel, Connectorisation, Closing The Deck Gland And Re-Panelling. , 5 (Ek 896 Vlf/Hf Rx) - Post Overhaul/ Serviceability Checks As Per Sow 4. , 1 (Lup 329 20 Watt Portablev/Uhf Set - Make : Bel Hydmodel : Lup 329 20 Watt Portable V/Uhf Set Oems Local Representative : Bel Banglore)Overhauling Of Complete System As Per Sow 3. , 2 (Lup 329 20 Watt Portablev/Uhf Set) - Post Overhaul/ Serviceability Checks As Per Sow 4. , 3 (Lup 329 20 Watt Portablev/Uhf Set) - Overhauling Of Antenna As Per Sow 5 , Mandotary Spares Eb9036b-110001612571 - Module Cp , Eb9036b-110001612668 - Module Am , Eb9036b-110001612765 - Module Synthesizer , Eb9036b-110001612862 - Module If+ Audio , Eb9036b-110001612959 - Module Mcu , Eb9036b-110001596469 - Module Power Supply , Eb9036b-110001613056 - Panel Mb , Eb9036b-446810160167 - Graphic Display Module , Eb9036b-110001612086 - Panel Assy , Eb9036b-110001618682 - Connection Bnc Assy , Eb9036b-110001611989 - Pcb Flex Assy , Na - 12 V, 4 Ah Battery , Eb9036b-110001353775 - Synthesizer Pcb , Eb9036b-110001353872 - Hf Unit Pcb , Eb9036b-110001354357 - Processor Pcb , Eb9036b-110001354939 - Interface Pcb , Eb9036b-210119870116 - Tuning Wheel , Eb9036b-110001189748 - Controller Unit Pcb , Eb9036b-110001189845 - Power Supply Pcb , Eb9036b-110001355230 - If/Af Processor Pcb , Eb9036b-456800100733 - Fuse 0.63A , Eb9036b-456800101024 - Fuse 1.25 A , Na 1 - 12V,10 Ah Battery , Na 2 - Handset Total Quantity : 1
