|
| 1 | SOP (Port & Stbd) (MT - 610013) | Make: BEL, Chennai Model: SOP MK I Serial No : 036 & 037 OEM\"s Local Representative: M/s BEL, Chennai Nandambakkam CDU unitSupply and replace Joystick button on CDU unitview defective as auto track and LRF button not functioning intermittently. |
| 2 | SOP (Port & Stbd) (MT - 610013) TI Camera | Carry out nitrogen purging for TI camera as described in Para 22, 23 & 24 of INBR 4032. |
| 3 | SOP (Port & Stbd) (MT - 610013) CCD Camera | Carry out nitrogen purging for CCD as described in Para 26, 27 & 28 of INBR 4032. |
| 4 | SOP (Port & Stbd) (MT - 610013) LRF Device | Carry out nitrogen purging for LRF as described in Para 30 & 31 of INBR 4032. |
| 5 | SOP (Port & Stbd) (MT - 610013)SOP (P) (I) | Carry out complete performance check (rigidity check) of SOP. |
| 6 | SOP (Port & Stbd) (MT - 610013)SOP (P)(II) | Serviceability check to be carried out of all Modules/PCBs fitted inside SAFE, CDU and SPC unit. |
| 7 | SOP (Port & Stbd) (MT - 610013)SOP (P)(III) | Replace rubber glands and gaskets as described in Para 32 & 33 of INBR 4032. |
| 8 | SOP (Port & Stbd) (MT - 610013)SOP (P)(IV) | Flash lamp to be replaced after approximately one Lakh shots or five years whichever is earlier in a clean room facility. |
| 9 | SOP (Port & Stbd) (MT - 610013)SOP (P)(V) | Energy storage capacitors to be replaced after five years in a clean room facility. |
| 10 | SOP (Port & Stbd) (MT - 610013)SOP (P)(VI) | Purchase and replace Fiber Optic Gyro for Azimuth and Elevation in both SOP |
| 11 | SOP (Port & Stbd) (MT - 610013)SOP (P)(VII) | Purchase and replace all face caps of CCD, LRF & TI Cameras |
| 12 | SOP (Port & Stbd) (MT - 610013)SOP (P)(VIII) | Carry out alignment checks of SOP, perform adjustment if necessary. |
| 13 | SOP (Port & Stbd) (MT - 610013)SOP (P) | STW and Prove the system for satisfactory performance post rountines. |
| 14 | Mandotary Spares | RELEASE FUSE |
| 15 | 1750 002 824 31 | INTERFACE CARD GCC |
| 16 | 1750 004 411 23 | POWER SUPPLY PCB ASSY.(SAFE) |
| 17 | 1753 023 001 76 | SIGHT PEDESTAL DSP CARD |
| 18 | 1750 006 957 48 | SIGHT PEDESTALCONTROLLER (SPC) |
| 19 | 4579 755 801 01 | STATIC INVERTER (27V DC TO 115V, 400HZ) |
| 20 | 1753 032 004 33 | C- 40 DSP CARD |
| 21 | 4463 750 302 92 | CCD CAMERA |
| 22 | 1800 000 270 54 | LASER RANGE FINDER |
| 23 | 4576 753 002 08 | TI CAMERA |
| 24 | 1753 023 002 73 | SERIAL& PRE PROCESSOR CARD |
| 25 | 1753 033 001 49 | GSP CARD (NAVAL) |
| 26 | 4567 750 102 28 | FUSE 10 A |
| 27 | 1750 004 408 32 | PA DRIVER CARD |
| 28 | 1753 073 001 38 | PCB ASSY (CDU PCB) |
| 29 | 1753 082 005 89 | POWER AMPLIFIER CARD (SPC) |
| 30 | 1753 093 002 78 | CAPACITORCARD SPC |
| 31 | 1750 006 585 97 | SPC-PEDESTAL CABLE |
| 32 | 4490 750 702 03 | FIBRE OPTIC GYRO (FOG) |
