Procurement Of Ultrasonic Level Transmitters For Imd-Iv, Stps, Mppgcl, Sarni. , Ultrasonic Leveltransmitter & Remote Unit , Ultrasonic Level Transmitter Technical Details Application: Level Measurement, Suitable For Highly Corrosive Media.Range:- 0.25 To 11M, Frequency:- 35 Khz, Angle Emission Lobe:- 5.5°, Ultrasonic Transducer:Compact, Protection:Ip67, Working Temperature:¬40 To 70°C, Storage Temperature: ¬40 To80°C, Relative Humidity:<95% Resistance To Vibrations: Mechanical Vibrations 10M / S2, 10M To 150Hz Interval Of Measure: ~2Sec, Interval Of Updating: ~3Sec, Resolution Display:1Mm, Supply Of 2 Wires Version:¬ Input Voltage:15 To 36Vdc ¬Absorption:Max. 22.5Ma, ¬Ripple Allowed:<100Hz, Uss>1V; 100Hz÷100Khz, Uss<10Mv, Output Signal:2 Wires 4¬20 Ma, Hart, Resolution:1, 6?A, Fixed Signal For Anomaly:20.5Ma; 22Ma; 3.8Ma. The Instruments Can Be Set Up In 3 Ways: 1. By Display 2. By Wireless Connectivitysoftware 3. By Hart Program , Indicator Cum Ru Remote Unit For Above Transmitter Power Supply: Standard ( 85-260V Ac / 100-300Vdc ) , Power Consumption<10Vainput:- Thermocouple ( Type E, J, K, T, B, R, S ) , Rtd-Pt100, Voltage / Current: 1-5V / 0-5V / 0-10V Dc 0 / 4-2-Ma ( Ext. 250? ) , Accuracy:- 0.25% Of Fs, Adc Resolution: 16 Bits. Output:Current:-0-20Ma / 4-2-Ma@500? Max, Voltage:- 0-5V / 1-5V / 0-10V @3K? Min, Accuracy:- 0.25% Of Fs, Alarm Output:- Type: Single Change Over ( C, No, Nc ) , Rating: 5A @ 230V Ac / 30V Dc, Transmitter Supply:- 24Vdc ( + / - 10% ) @ 26Ma ( Current Limited ) , Display & Keys:-Process Value:- 0.56 4-Digit, Red 7 Segment Led, Set Value: 0.4, 4-Digit, Green 7 Segment Led, Keys: Enter, A / M, Increase, Decrease. Environment:-Operating Temperature: 0-55°C, Storage Temperature: 0-80°C, Humidity: 30-95% Rh Non-Condensing. Ingress Protection:- Ip65
