|
| 1 | Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing, spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. . |
| 2 | (a) Depth of excavation not exceeding 1.500 mm. |
| 3 | Earth work in filling in foundation trenches or plinth with good earthin layers not exceeding 150 mm. including watering and ramming etc.layerby layer complete .(payment to be made on the basis of measurement of finished quantity of work). |
| 4 | (a) With earth obtained from excavationof foundation. |
| 5 | Earthwork in filling in compound , tank , lowland, ditches etc. with good earth in layers not exceeding 150 mm.including breaking clods and consolidating the same by ramming and dressing complete.(payment will be made on profile measurement before and after the work). |
| 6 | (b) (i) With carried eath arranged by the contracor with in a radius of 3 km. including cost of carried earth. |
| 7 | Brick soling with picked jhama bricksincluding preparation of bed as necessary, with brick joints properly filled in and packed with powdered earth and including necessary cushion of similer material below the soling (and in between layers when more than one layer is used) complete as per direction. |
| 8 | (a) Single brick flat soling (thickness 75 mm.). |
| 9 | (II) Cement concrete with 30 mm. down graded shingles excluding shuttering.N.B. VarietyIn ground floor . |
| 10 | (a) 1:3:6 proportion. |
| 11 | Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant codes. |
| 12 | (i) Pakur Variety. |
| 13 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc.initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction. |
| 14 | (a) For works in foundation, basement and up to roof of ground floor/up to 4m. Tor steel/Mild steel. |
| 15 | SAIL/ TATA/RINL |
| 16 | Hire and labour charge for shuttering with centreing and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thick ness with required bracing for concrete slabs, beams, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to roof of ground floor). |
| 17 | (a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of the Engineer-in-charge. . |
| 18 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 19 | Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface]. |
| 20 | (ii) With 1:4 cement mortar . |
| 21 | (c)10 mm. thick plaster. |
| 22 | Neat cement punning about 1.5mm thick in wall, dado, windowsill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 23 | Supplying, fitting, fixing marble slab/tiles of 15mm. to 18mm. thic knessin floor, lobby, stair, landing & treads etc. over 20 mm (av.) thick base of cement mortar (1:2) laid with white cement slurry @4.4 kg/sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/sq.m with necessary pigments including grinding and Granite polishing as per direction ofEngineer-in-charge in Ground Floor. {White cement and Pigment to be supplied by the Agency} . |
| 24 | (a) WithMakrana plain pink /Adranga pink / Garbh Gulabi/Udaypur pink / Udaypur Green / Black Bhaslana. |
| 25 | (ii) Area of each Slab/tile exceeding 0.3sq.m. but not exceeding 0.6 sq.m. |
| 26 | Supplying,Fitting & fixing 1st quality Ceramic tiles inwalls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. |
| 27 | (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20 Kg/Sq.m. |
| 28 | (a) Area of each tile up to 0.09Sq.m. |
| 29 | (ii) Other than Coloured decorative including white. |
| 30 | M.S. gate of jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round/square bars or angles. M.S. sheet (not less than 14 gauge). Gussets. Cleats etc. including necessary riveting . Bolting. Welding,locking and hanging arrangements fitting and fixing complete as per direction of the Engineer-in-charge.In ground floor.. |
| 31 | Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet mitercut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided throughout the frame. The door frame shall be fixed with the wall using 65/100 mm longM.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos ofscrews to be provided for each vertical member and minimum 2 Nos forhorizontal member etc. complete as per Manufacturer?s specification anddirection of Engineer-in-Charge. |
| 32 | PVC Door Shutter-30 mm thick:Supplying fitting and fixing P.V.C. door shutter of approved quality & shade inposition, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C.multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm)wall thickness.Horizontal & vertical section shall be fixed to each other by selftapping screws and 1 solid polymeric or M.S. galvanised tubular \"L\" shapedbracket 100mm x 200mm in each corner of the shutter frame for placing hinges.Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of200 mm long at both ends and screws from both sides as lock rail. The sectionframe will then be fitted in by PVC panels of size 100 mmx25 mm with wallthickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will beinserted horizontally with both side check and nut system and stretches wherefixing of hinges / hasp bolt / tower bolt / |
| 33 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same throughly (plastered or concrete surface) as per manufacturer\"s specification. In ground floor. |
| 34 | (iii) Two coats. |
| 35 | Acrylic Distemper to interior wall, ceiling with a coat of solvent basedinterior grade acrylic primer (as per manufacturer\"s specification)including cleaning and smoothning of surface.Two Coats |
| 36 | Rendering the Surface of walls and ceiling with White Cement baseWATER PROOF wall putty of approved make & brand.(1.5 mm thick) |
| 37 | (b) Priming one coat on timber or plasteredsurface with syntheticenamel oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 38 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 39 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sandparpering etc. in cluding using of approved putty etc. on the surface , if necessary. |
| 40 | (b) On steel or other metal surface: . |
| 41 | (1) With super gloss (hi-gloss). |
| 42 | (iv) Two coats (with any shade except white). |
| 43 | Iron butt hinges of approved qualityfitted and fixed with steel screws, with ISI mark. |
| 44 | (vi) 100mm x 50 mm x 1.25 mm. |
| 45 | Anodise aluminium barred/tower/socket bolt (full covered) of approved manufactured from extruded section conforming to I.S.204/74 fitted and Fixed with cadmium plated screws:. |
| 46 | (ix) 300 mm long x 10 mm dia. bolt. |
| 47 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 . |
| 48 | Single socketed3 meter length. |
| 49 | 110 mm. |
| 50 | Supplying, fitting and fixing PVC pipes of approved make ofof Schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pi;es as per IS:1239 (Part-I) with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting piles, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials. Payment for painting will be made seperately). |
| 51 | For Exposed Work PVC Pipes. |
| 52 | 25 mm. |
| 53 | Supplying, fitting and fixing PVC pipes of approved make ofof Schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pi;es as per IS:1239 (Part-I) with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting piles, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials. Payment for painting will be made seperately). |
| 54 | For Exposed Work PVC Pipes. |
| 55 | 15 mm dia. |
| 56 | Supplying, fitting and fixing Peet\"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I marking with fittings(tested to 21 kg per sq.cm.). (Note: Item (vii),(viii) and (ix) to be done as per specific direction of the Engineer-in-charge). |
| 57 | 25 mm. |
| 58 | Supplying PVC water storage tank of approved quality with closed top weith lid (Black) - Multilayer. |
| 59 | 500 litre capacity. |
| 60 | Wash basin white vitreous china of approved make(without fittings) supplied, fitted and fixed in position on 75mm X 75mm X 75mmwood blocks and C.I. Brackets including two coats of painting of C.I. Brackets. |
| 61 | 450 mm x 300 mm size. |
| 62 | Supplying, fitting and fixing Flat back urinal (half stall urinals) in white vitreous chinaware of approved makein position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. |
| 63 | Corner urinal 440 mm X 345 mm X 250 mm. |
| 64 | Supplying, fitting and fixing bib cock or stop cock. |
| 65 | Chromium plated Bib Cock short body (Equivelent to Code No.511 & Model- Tropical /sumthing special of ESSCO or Similar brand). |
| 66 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved makein position complete excluding \"P\" or \"S\" trap (excluding cost of concrete for fixing). |
| 67 | 530 mm X 410 mm. |
| 68 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm(depth) with 250 mm thick 1st. class brick work in cement mortar(4:1) on all sides, bottom of the pit consisting of 100 mm thick cement concrete(1:6:3) with stone chips over a layer of jhama brick flat soiling, 15 mm thick (1:4) cement plaster to inside walls and outside walls upto G.L. and 20 mm thick(1:4) plaster to bottom of the pit, providing necessary invert with cement concrete(1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% andshuttering including 6 mm thick cement plaster(1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils |
| 69 | with Bazree (N.B.Variety). (JSW/JSP/SHYAM /SRMB/BMASL/ELECTROSTEEL/SSL) |
| 70 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work(6:1) band all round and cement brick work(6:1) upto 0.90 metre from top with 19 mm thick cement plastering(4:1) to inside face upto the depth of cement brick work, 12 mm thick cement plaster(4:1) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal(50 mm to 63 mm size) including R.C.C. cover slab of designed thickness with cement concrete(4:2:1) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making necessary arrangements for pipe conections, excavation of well including shoring, dewatering and remeving the excess earth from the premisis as per direction complete in all respect with all costs of labour and materials.W |
| 71 | (SAIL/TATA/RINL) |
| 72 | Construction of Septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (4:1) including two 560 mm dia. R.C.C. manhloe cover of approved make supplied, fitted and fixied in the top slab with necessary fittings, 19 mm thick cement plaster(4:1) with neat cement finish to the internal surfaces and 12 mm thick plaster(4:1) to outside wall upto 200 mm below G.L. floor finished with 25 mm thick grey artificial stone including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavating earth in all sorts of soil, shoring, bailing and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tank with earth, removing spoils, fliing up the chamber with clear water, removing foreign materialsfrom the chamber and including constructing attached inspection pit as per approved dawing and connecting all necessary pipes, joints etc. with internal plaster work and artif |
| 73 | For 50 users. |
| 74 | With Bazree (N.B.Variety).(SAIL/TATA/RINL) |
| 75 | GST 12% |
| 76 | LWC 1% |
