|
| 1 | Taking down chowkhats with shutters (without taking off shutters from the frame) area not exc 1.5 sqm each complete all as specified & directed. |
| 2 | Taking down chowkhats with shutters (without taking off shutters from the frame) area exc. 1.5 sqm and not exc 4.0 sqm each complete all as specified & directed. |
| 3 | Taking down shutter of any description exc 1.00 sqm and not exc. 2.00 sqm each complete all as specified & directed. |
| 4 | M&L for brick work with sub-class ‘B’ bricks (with old size bricks), straight or curved on plan exc. 6.0 mtr mean radius, built in cement mortar 1:6, complete all as specified & directed. |
| 5 | Taking down cement plaster, any description on brick walls or on concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc., and removing same from the site(s), complete all as specified & directed. |
| 6 | M&L for 15 mm thick rendering in CM (1:6) on fair/other than fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for 10 mm thick rendering in CM (1:3) on ceiling surface finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for 15mm thick rendering in CM (1:4) on fair faces of brick/concrete finished even and fair without using extra cement including necessary padding, steel scaffolding and shuttering for working platform etc complete all as specified & directed. |
| 9 | S&F steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified & directed. |
| 10 | All as per item No 09 above but without glazing bars complete all as specified & directed. |
| 11 | S&F mild steel guard bars for window conforming to Fe 290 Gde E-165 fixed in repair complete all as specified & directed. |
| 12 | S&F steel ventilator with top hung shutter including hinges steel peg stay including taking down old steel ventilator complete all as specified & directed. |
| 13 | S&F second class hard wood (SAL or BEJASAL) as in framed work clean sawn using Sal wood as in scantling complete all as specified and directed. |
| 14 | S&F 35 mm thick flush shutter, solid core constructions with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 15 | S&F 35 mm thick IIndclass hard wood, glazed and Skelton door shutter, factory made (fully glazed, open rebated, and prepared to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered sash bar, or rounded, fitted with cut and mitered beads for securing glass etc; size of members of shutters as specified in SSR Part I section - 8, clause 8.20 (a) complete all as specified and directed. |
| 16 | Supply and fixing 100 mm butt hinges stainless steel complete all as specified and directed. |
| 17 | S&F of 300 mm long aluminium anodised sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 18 | S&F of 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 19 | S&F of 200 mm long barrel tower bolt aluminium anodised of extruded section complete all as specified and directed. |
| 20 | Supply and fixed in repair of 125 mm aluminium anodised barrel tower bolt complete all as specified and directed . |
| 21 | Supply and fixed in repair of 125 mm size aluminium handle fabricated type anodised complete all as specified and directed. |
| 22 | Supply and fixing galvanised mild steel wire cloth 0.56 mm in nominal dia of wire average width of aperture 1.18 mm fixed with wooden beads to wooden joinery complete all as specified and directed. |
| 23 | Supply and fixing, in repairs galvanised mild steel wire cloth 0.56 mm in nominal dia of wire average width of aperture 1.18 mm and fixed with wooden beads to wooden joinery complete all as specified and directed. |
| 24 | Supply only 3mm thick sheet glass ordinary quality glazing with oil putty or wooden beads area not exc. 0.5 Sqm in each pane all as specified and directed. |
| 25 | S & F 3mm thick sheet glass ordinary quality glazing with oil putty or wooden beads area not exc 0.5 Sqm in each pane including hacking out old broken glass complete all as specified & directed. |
| 26 | S&F 300 mm ordinary rat tail pattern springs including rod roller and with roller plate complete all as specified & directed.(Make: RITZ or equvalent as approved by GE). |
| 27 | M&L for plain cement concrete (1:2:4) type B-1(using20 mm graded stone aggregate) for fixing holdfast and coping including all necessary form work complete all as specified and directed. |
| 28 | M&L for cement concrete type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) as in padding, roof kerb incl hunching, benching etc complete all as specified and directed. |
| 29 | M&L 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in plinth protection and paving laid in alternate bays finished finish even and smooth without using extra cement including mastic filling in joints complete all as specified and directed. |
| 30 | M&L factory polished vitrified ceramic tiles light shade in colour 10 mm thick (square/rectangular)area of each tiles not exceeding 0.36 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in cement mortar 1:6 for receiving finish complete all as specified and directed. |
| 31 | M&L factory polished vitrified ceramic tiles light shade in colour 10 mm thick (square/rectangular) area of each tiles not exceeding 0.36 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting including 10 mm thick rendering in CM (1:4) complete all as specified and directed. |
| 32 | M&L glazed ceramic coloured tiles size 450x300x7mm thick in walls etc set and jointed in neat cement slurry and pointing in white over 10 mm rendering on fair faces of wall 1:4 cement complete all as specified and directed. |
| 33 | M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window -cills cooking platforms and like in cement mortal (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 34 | Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) and rubbish off the premises complete all as specified and directed. |
| 35 | S&F steel water tubing 15mm dia (Bore), galvanised, ‘medium grade’ with all fittings, fixed on walls, ceiling or laid in floors or any other situation with fittings and connections, etc., complete all as specified & directed. |
| 36 | S&F steel water tubing 20 mm dia (Bore), galvanised, ‘medium grade’ with all fittings, fixed on walls, ceiling or laid in floors or any other situation with fittings and connections, etc., complete all as specified & directed. |
| 37 | M &. L for cutting chases for concealed water tubing and making good in CM(1:3), cutting not exc 10 CM girth in brick wall complete all as specified and directed. |
| 38 | S&F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted including 20 mm dia float valve complete all as specified & directed. |
| 39 | Supply and fixinggun metal globe or gate valves with iron wheel head screwed both ends for20 mm bore dia iron pipe and fixed complete all as specified and directed. |
| 40 | S & F vitreous china wash hand basin, white flat/angle back size 550 x 400 mm complete incl necessary cutting holes and pinning in ends of brackets and 75 mm long and 32 mm bore PVC waste pipe and 32 mm brass CP waste coupling complete all as specified and directed. |
| 41 | S&F tubular towel rail 20mm dia D type 60cm long between flanges brass CP complete all as specified and directed. |
| 42 | S&F 600x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass, screw and cup washers complete all as specified and directed. |
| 43 | Supply and fixing PVC connection 450 mm long with brass coupling on both end suitable for 15 mm bore of pipe complete all as specified and directed. |
| 44 | S&F in repair 15 mm bore angle cock, cast copper alloy chromium plated, screwed down, high pressure, with capstan screwed both ends for iron pipe or for unionscomplete all as specified and directed. |
| 45 | Supply and fixing 15 mm dia bib tap fancy type CP cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe complete all as specified and directed. |
| 46 | M&L for machine pressed precast concrete interlocking paver block 80 mm thick having lacquer finish any shape and size confirming to IS 15658-2006, M-35 with grey cement and pigment complete all as specified and directed. |
| 47 | M&L sand filling under floors or in foundation including watering, ramming and consolidation complete all as specified and directed. |
| 48 | M&L for hard core of gauge not exceeding 63 mm of broken granite stone deposited spread and leveled in layers not exceeding 15 cm watered and rammed to a true surface complete all as specified and directed. |
| 49 | M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed |
| 50 | S&F cast iron soil waste & vent pipe in any length with or without ears, with cement joints 75 mm bore laid in floor/trenches all as specified & directed. |
| 51 | S&F cast iron bend 75 nm bore ( any radius ) diminishing pieces or tapers larger bore measured complete all as specified and directed. |
| 52 | S&F cast iron floor trap 75 mm dia with CP grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B1 complete all as specified and directed. |
| 53 | Demolition of reinforced cement concrete of roofs, floors (other than ground floors) beams staircases landing chajjas and similar suspended work etc complete all as specified and directed. |
| 54 | Use & waste form work to soffits of suspended slabs such as roof slabs, floor slabs and lintels, chajja,landings and similar work exc 200mm thick complete all as specified and directed. |
| 55 | M&L for mild steel deformed TMT bars 8mm dia and over (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 56 | M&L for RCC (1:1.5 :3) type A-2 (using 20mm graded stone aggregate) as in beam, lintels, columns/pillars and chajja etc similar work, complete all as specified and directed. |
| 57 | M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth when unconnected with other painting or when painted in different tint and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 58 | M/L for preparation of old painted surfaces of wood and wood based materials of any description not other wise described over 10 Cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 59 | M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 60 | M&L for preparation of old steel or iron surface of any description exceeding 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 61 | M&L preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 62 | Complete removal of existing treatment i.e. white wash, colour wash ,distempering etc. of wall complete all as specified and directed. |
| 63 | M & L for old surface applying two coat of cement base paint over a coat of primer complete all as specified and directed. |
| 64 | M&L for preparation of old plastered surfaces of wall and applying two coats of white wash complete all as specified and directed. |
| 65 | M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 66 | M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over a coat of cement primer complete all as specified and directed. |
| 67 | M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 68 | S& F 1.25 mm Steel rolling shutters, with out ball bearing, as specified including top cover, an- choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle complete in all respect as per the direction of engineer in charge. |
| 69 | Dismantling structural steel work including doors, gates, cattle trap but excluding framed truss etc complete all as specified and directed. |
| 70 | Taking down/removing of existing water proofing treatment on roof surfaces and wall surfaces complete, including pee tiles, screed bed, racking out joints, hacking for key scrubbing down with water etc, and removing rubbish to out of MOD land complete all specified and as directed. |
| 71 | M&L for providing and applying fiber reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having sun reflective index(SRI) of 105 manufactured by Asian paints ltd or equivalent as approved by GE on top of concrete roof in three coats @ 10.76 litre10sqm.One coat of self priming of elastomeric waterproofing liquid(Dilution with water in the ratio of 3\"1) and two coat of undiluted elastomeric waterproofing liquid (dry film thickness of complete allocation/system not less than 500 microns). The operation shall be carried out after scraping and properly cleaning loose particles with wire brushes, complete in all respect as per direction of brushes, complete in all respect as per the direction of engineer in charge.(Note : Treatment shall be done through authorised representative of manufacturer). |
| 72 | M & L for screed bed 10 mm thick (average) plaster on concrete surfaces in CM (1:3) on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cement all as specified and directed. |
| 73 | M&L pre machine cut, factory polished, Kota stone slab flooring 20-25mm thick laid over and including 20mm thick screed bed or bedding layer in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing etc complete all as specified and directed. |
| 74 | All as per item No 73 above but 20-25 mm thick Kota stone, factory polished, pre machine, cut slab as in skirting over and including 10mm thick rendering in CM (1:3) complete all as specified and directed. |
| 75 | M&L for 25 mm thick plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in floors, laid in alternate bays, surface finished even and smooth using extra cement complete all as specified and directed. |
| 76 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 77 | M&L for 100 mm thick Cement concrete type B- 2, (1:2:4) (using 40mm graded stone aggregate) as in floors, laid in alternate bays, surface finished even and smooth using extra cement complete all as specified and directed. |
| 78 | M&L moistening the prepared surface for proper dispersion and penetration and applying two component cementitious elastomeric water proofing coating damp block 2K manufactured by M/s Asian Paints Ltd in two coats @ 1.4 kg/m2 to build 1 mm thickness as per manufacture\"s specifications. The first coat shall be applied @ 0.7 kg/sqm and while 1st coat is still green the second coat Shall be applied with a suitable and stiff brush @ 0.7kg/sqm . The treatment shall be carried out to entire horizontal surface and upto the height of tiles level on vertical walls, subsequently curing to be done on the vertical and ponding for 48 hours on the horizontal surface according to the good practice complete all as specified and directed. |
| 79 | M&L 16 mm thick of size 600x600 mm mineral fibre false ceiling system of pattern classic lite RH 99 (beveled regular) of Armstrong or equivalent make and model including grid system using hot dipped galvanised steel section, exposed surface with pre-powder coated capping, main runner and cross runner and to comprise main tee/runner 15mm x 38 mm size (load carrying capacity 14 kg/sqm) spaced at 1200 mm centre securely fixed to the structural soffit and flush fitting 1200 rnm long cross tee/runner to be interlocked between main runners at 600 mm centre to centre from 1200x 600 mm module, cut sub cross tee/runner 600mm require independent support. Wall angle of size 19mm x 19mm, secured to the periphery of the wall at 450 mm maximum centres. The above grid is suspended at every 1200 mrn centre to centre in both direction and starting from wall at the distance 350 mm from wall by using 3.50 mm dia aquiline wire with suitable fasteners and hook clip complete all as specified and directed. |
| 80 | Taking down carefully point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose , pendant holder, fitting and fixtures , MCB DB’s , MCB, Main switches, call bell etc and making good to disturbed surface to wall ,floor etc to match with existing surface either by using same colour distemper or white colour wash all as required complete all as specified & directed. |
| 81 | Taking down care fully by unscrewing from boards /out let boxes ,fittings and fixtures such as Tube light fitting /of any type / /MCB DB etc complete all as specified and directed. (Note : - This item to be operated only when item found serviceable for re-use in work complete all as specified and directed). |
| 82 | M&L point wiring for one light/fan point controlled by one wayswitchPVC FRLS insulated and unsheathed copper stranded conductor cable of size 1.5 Sq mm , 1100 V drawn in and including PVC casing and capping complete including cast iron/pressed steel terminal box 1.6 mm thick of required size Bakelite sheet 3mm thick for mounting switch , socket brass screws and washer including PVC insulated and unsheathed solid copper wire of size 1.5 Sqmm will be used as continuous earth wire complete all as specified and directed. |
| 83 | All as per item No. 82 abovebut one 5/6Amp socket on the same board with otherswitch |
| 84 | All as per item No. 82 abovebut one 5/6Amp socket on independent board. |
| 85 | All as per item No. 82 abovebut one 3 pin 15 Amp socket independent but with 2.5 sqmm PVC insulated unsheathed copper stranded conductor and earth wire with 1.5 Sqmm |
| 86 | S & F in replacement switch piano type 240 V, 5 Amp , SP one way flush type complete all as specified & directed. |
| 87 | S&F socket outlet 2 in 1,3 pin 5 amps complete all as specified & directed. |
| 88 | S & Fin replacement bell push240 V, 5 Amp , SP one way flush type complete all as specified& directed |
| 89 | S&F in replacementof socket out let combination multipurpose3 Pin 5 amp, 240 volt andwith 2 pin 5 amp out let also flush type including for existing points also (non shuttered) complete all as specified & directed. |
| 90 | S&F in replacement of switch socket outlet combination3 pin 15 Amp,3 Pin 5 Amp out let also flush type (non shuttered) including for existing points complete all as specified & directed. |
| 91 | S&F in replacement ceiling rose surface bakelite, 65 x 20 mm three terminal complete all as specified & directed. |
| 92 | S&F in replacement sheet metal enclosures for MCB distribution board TPN, 4 way double door type including with MCCB 4 Pole, 100 Amps, 16 KA fixed type as incomer with 200 amp rated bus bar complete all as specified & directed. |
| 93 | S&F sheet metal enclosures for MCB distribution boardSPN 8way double door type with 200 amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified & directed. |
| 94 | S&F sheet metal enclosures for MCB distribution boardSPN 4way double door type with 200 amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified and directed. |
| 95 | S&F MCB, TPN , 63 amp 4 pole isolator, 415 volt complete all as specified in existing DB,s in replacement complete all as specified & directed. |
| 96 | S&F in replacement MCB SP upto 30 Amp ,240 volt complete all as specified & directed. |
| 97 | S&F in replacementMCB,SPN , 20 to40 Amp , 240 Volt complete all as specified & directed. |
| 98 | S&F replacement regulator Electronic step up type 240 Volt single phase suitable for ceiling fan complete all as specified & directed. |
| 99 | M& L for earthing complete with galvanized steel earth plate electrode 60cm x60 cm x6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.50 mtr below normal ground level connected to galvanized earth lead strip 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 connected to earthing test point all as specified or indicated including testing on completion including PCC pit in (1:3:6) type C-2 cement concrete .RCC 1:2:4 mix type B reinforced with 6mm dia MS bars @ 150mm RCC cover slab 40mm thick with two no’s fitting handle, GI pipe 20mm dia light grade with funnel & wire mesh for watering and 40mm dia light grade GI pipe for earth strip 4 mm protection etc complete all as specified & directed. |
| 100 | S&F for sub main wiring with two runs of single core 4 sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC rigid conduit 20 mm dia with all necessary fittings and accessories and run of PVC insulated and unsheathed single core cable with copper conductor of size 2.5 sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to commonearth dolly , including taking out the old sub main wiring complete all as specified and directed.(Note. Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one RM). |
| 101 | S&F for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC rigid conduit 20 mm dia with all necessary fittings and accessories and run of PVC insulated and unsheathed single core cable with copper conductor of size 4.0 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to commonearth dolly , including taking out the old sub main wiring complete all as specified and directed.(Note. Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one RM). |
| 102 | S&F cirrus mini pro LED surface mounting luminaire with dimension of 312mm x 312mm suitable for porch all as specified and directed. (Make : Crompton Greaves/Philips/Havells). |
| 103 | S&F in replacement of fluorescent tube light fitting complete powder coated CRCA steel sheet housing T-8 LED integrated with Opal diffuser, LED driver of constant current output, operating range 170-275 volt and all accessories pre wire and connecting up with copper three core flexible cord of min size 0.5 sqmm and PVC connector etc including provision of hanging and wall mounting complete all as specified and directed. (Make : Crompton Greaves/Philips/Havells |
| 104 | M&L forreplacement of existing unserviceable recessed mounted luminaire with energy efficient 36 Watt LED type including making connection to ceiling rose with copper flexible wire of size 23/0076 all as specified and directed. Make : Crompton Greaves/Philips/Havells |
| 105 | S&F ceiling fan 1400 mm sweep, 5 star rated ,230 volts 50 watt, confirming IS 374:1979 copper winding, double ball bearing, down rod and canopy along with regulator etc including suitable PVC 3 core 1.5 sqmm wire from making good the disturbed surface along with testing complete all as specified & directed. Make: Crompton/USHA/Bajaj/Havells/Polar or as approved by GE. |
| 106 | Supply & fix exhaust fans, heavy duty, metallic body AC single phase 230/ 240 V of size 380 mm sweep with louver including making circular holes including making good the disturbed surface all as specified and directed. (Make : Crompton greaves/Bajaj/Khaitan/Usha). |
| 107 | Supply & fix exhaust fans, heavy duty, metallic body AC single phase 230/ 240 V of size 450 mm sweep with louver including making circular holes including making good the disturbed surface all as specified and directed. (Make : Crompton greaves/Bajaj/Khaitan/Usha). |
| 108 | M&L chemical earthing complete with copper plate electrode of size 900mm x 600mm x 5 mm thick buried directly in ground with top edge of the plate not less than 4.5M deep below normal GL connected to copper strip 32x6mm as main earthing lead and connected and tinted copper bolts, nuts, check nuts & washers besides brazing at all joints all as directed and connected to earth test point all as specified and directed on completion with and including excavation and earth work, returning filling , removal of surplus soil etc. and filling with adequate quantity of charcoal dust (minimum 250 Kg), salt crystal (minimum 200 Kg) and MgSO4 crystal (minimum 100 Kg) , PCC work (1:3:6) type C-1 using 20mm graded stone aggregate for earth pit chamber with 40 x40x6mm mild steel angle iron frame for cover , precast RCC cover (1:2:4) type B-1 using 20mm graded stone aggregate50 mm thick, reinforced with 8 mm dia TMT bars @ 75mm c/c on both way with funnel with wire mesh and 40 mm dia \" light grade\"for earth lead protection pipe and watering pipe of size 20 mm dia \" light grade\"and testing , commissioning complete all as specified and directed.Note: (i) All joints including electrode to strip and strip to strip will be done only by copper welding/brazing. Excavation earth work and all connected items shall be deemed included in quoted unit rate. (ii) Copper earth strip and GI protection pipe 40mm dia beyond 7.5m long shall be measured and paid separately. |
| 109 | Material and labour for lightening protection system 107 mtrs radius maximum height of the lighting protection not less than 5 mtr made of aluminium and outer surface coated with SS and streamer emission 60m incl suitable strip all as specified and directed |
