Repairing & Replacement Of Faulty Street Light Fixtures For Existing Poles In Emsd Cherlapally Ecil Hyderabad., Hyderabad-Telangana

Repairing & Replacement Of Faulty Street Light Fixtures For Existing Poles In Emsd Cherlapally Ecil Hyderabad. Supply and laying of following 1100V grade XLPE insulated PVC sheathed armoured heavy duty Al. Cables of approved make conforming to IS-7098 (Part-I) specifications inside the building on wall / floor / beam/ in trenches and outside the building in existing trenches from LT panel / DB panel to required loads including supply of all required fasteners and civil works etc., complete. 4 core 10 Sqmm Aluminium armoured cable. Make: Finolex / KEI / Universal / L&T Supply and laying of following 1100V grade XLPE insulated PVC sheathed armoured heavy duty Al. Cables of approved make conforming to IS-7098 (Part-I) specifications inside the building on wall / floor / beam/ in trenches and outside the building in existing trenches from LT panel / DB panel to required loads including supply of all required fasteners and civil works etc., complete. 3.5 core 50 Sqmm Aluminium armoured cable. Make: Finolex / KEI / Universal / L&T Jointing the above mentioned cable with suitable Terminations including supply of all jointing materials like cable glands, sockets, lugs, necessary fasteners and making provision in DB / LT panel for incoming & outing of cable with earthing of glands etc., complete. 4 Core 10 Sq.mm armoured Al. cable. Make: Raychem / Denson / HMI Jointing the above mentioned cable with suitable Terminations including supply of all jointing materials like cable glands, sockets, lugs, necessary fasteners and making provision in DB / LT panel for incoming & outing of cable with earthing of glands etc., complete. 3.5 Core 50 Sq.mm armoured Al. cable. Make: Raychem / Denson / HMI Excavation of about 1Mtr deep and 0.3Mtr width trench for accommodating DWC pipe for drawing 4 core 10 Sqmm Al. armoured cable. in all types of soils including road cutting, floor cutting with neat cement plastering as encountered on site and as instructed by Engineer in Charge. 4 Core 10 Sq.mm armoured Al. cable. Excavation of about 1Mtr deep and 0.3Mtr width trench for accommodating following runs of LT power armoured cable in all types of soils including road cutting, floor cutting with neat cement plastering as encountered on site and provision of sand cushioning on top and bottom of cable, placing of bricks to either sides and top of cable, back filling, tapping, including supply and fixing of LT cable route markers at every 15Mtrs interval as instructed by Engineer in Charge. 3.5 Core 50 Sq.mm armoured Al. cable. Supply and drawing of 600V grade PVC insulated copper FRLS wires/cables in existing surface / recessed steel / PVC conduit in different colours preferably black colour for neutral and green colour for shield including interconnections etc., complete. 3 core 2.5 Sqmm flexible cable Make: Finolex / L&T / KEI / Universal / RR Kabel / Lapp / BONTON Supply, installation, testing and commissioning of energy efficient weather proof high power LED street light fittings with LEDs of rating 36-40 Watts and compatible LED driver electronic control gear circuit suitable to operate at voltage level from 100V-280V AC, 50Hz. Make: Philips / Crompton / Bajaj / Havells / Wipro LEDs: OSRAM/ Nichia / Cree Supplying and fixing of 40 mm dia X 1.00 meter long G.I. pipe (medium class) bracket for mounting of above mentioned LED light fitting on pole including necessary reducers , nipples, clamps and bending the pipe to the required shape and clamping with nuts, bolts and washer, welding, painting the flat iron with primer and finish paint etc. as required. Supply & fixing of PVC terminal box with IP-65 protection of minimum size 230x175x140mm made out of 3mm thick Rigid PVC enclosue including DIN rail facility on MS plate for mounting SPMCB, connector strip and Neutral link in a box and as per the directions of Engineer in-charge a) 6A SPMCB b) 4-way 32A connector strip for one incoming and two outgoing cables c) Neutral Link Make: Hensel / Rittal / Schneider Earthing of street light poles using 2 runs of 8 SWG GI wire spiral earthing, salt & charcoal at 1Mtr deep below the ground including excavation and backfilling complete as per the instructions of Engineer Incharge. Supply and laying of 40x32mm DWC (Double Walled Corrugated pipe) directly in ground level of existing 01 mtr deep outdoor trench and as per the directions of Engineer in-charge Make: CPE / Telerex / Sudhaker Supply, installation, testing and commissioning of energy efficient weather proof high power LED post top lantern light fittings with LEDs of rating 36-40 Watts and compatible LED driver electronic control gear circuit suitable to operate at voltage level from 100V-280V AC, 50Hz. Make: Philips / Crompton / Bajaj / Havells / Wipro LEDs: OSRAM/ Nichia / Cree Supply and laying of 9 inch dia RCC pressure hume pipe in existing trench with required collars for road crossing & refilling and making the surface to original shape Removal of the old junction boxes from street light poles etc., complete and as directed by Engineer-in-charge. Removal of the existing old lights from street light poles etc., complete and as directed by Engineer-in-charge. Removal of the old armoured cables from street light poles etc., complete and as directed by Engineer-in-charge.

Refer document

Refer document

Refer document