|
| 1 | IS SIEVE SETS (20CM DIA BRASS FRAME) Sizes (mm/Micron)(a) 10.00mm, (b) 4.75mm © 2.36mm(d) 2.00mm (e) 1.18mm (f) 100mm (g) 600p (h) 425p (i) 300p(j) 150p (k) 90p (l) 75p Pan & Cover |
| 2 | IS SOEVE SETS (AS PER SPECIFICATIONS OF IS:460) ISS -GI FRAME SIEVE SET (SIZE 30CM DIA) 1) 125mm 2) 106mm 3) 90mm, 4) 80mm 5)63mm 6) 53mm 7) 45mm 8) 40mm 9) 37.5mm 10) 31.0mm11) 26.5mm 12) 22.40mm 13) 20mm 14)19mm 15)16mm 17) 32.2mm 18) 12.5mm 19)11.2mm 20)100mm 21) 9.5mm22) 8.3mm 23) 5.6mm 24) 2.8mm 25) 4.75mm26) 3.35mm |
| 3 | STANDARD LABORATORY USE COARSE GRADE SAND :Coarse sand must be supplied as per IS 650 in 25 Kg bags and it must be clean and free from any organic /inorganicimourities or excess silt |
| 4 | STANDARD LABORATORY USE Medium GRADE SAND :Mediumsand must be supplied as per IS 650 in 25 Kg bags and it must be clean and free from any organic /inorganicimourities or excess silt |
| 5 | STANDARD LABORATORY USE FINEGRADE SAND :Mediumsand must be supplied as per IS 650 in 25 Kg bags and it must be clean and free from any organic /inorganicimourities or excess silt |
| 6 | FRESH CONCRETE MIXER (PAN TYPE 40 LTR CAPACITY:Equipment must be transportable on self wheels . It must be supplied with minmium mixing drum capacity of 40 liters of fresh concrete . The drum RPM at least 20 to 25 RPM is desirabale mix must have provision of adjustable blades besides suitable for mixing mineral aggregate . Equipment must run by 415 V (*5%) 50Hz. Three phase AC supply or single phase supply of 220 V (15%) 50HZ (Equipment must be superior make manufacture and finish complete in all respect |
| 7 | LABORATORY CONCRETE SPECIMEN CUBE MOULDS: As per relevant is specifications (IS 10086) : cube Moulds for preparing concrete specifens for checking compressive strength of cement Concvrte of size 150mm |
| 8 | MOTORISED SIEVE SHAKER : Equipment must consists of motorized seive shaker for saving of ganular or bpwdered material /soils. It must accommodate up k 8 sieves of 20 cm dia. The equipment must be geated metro driver of suitable HP. Directionsof inclination of sieve table must change progressively in clock wise directions with both gravtory and tapping motion of table . equipment must be controlled by a proper switching device with time facility and emergency stop/start button . Equipment must run by 220 V (15%) 50HZ single phase AC Supply . Equipment must be Good make /manufacture with finish complete and operatonal in all respects |
| 9 | WATERBATH (REPUTTED MAKE)Water bath thermostaticously controlled or with digital controller cum indicator doubied wailedinner chamber made of non rustingsatinless steel outer body made of SS end minimum dimension 425x325x100)mm or better with temperature range of 5C -100C with precision of 10.5C Run by 220 V (*5%) 50HZ single pahse AC Supply. Equipment must be Good make /manufacture with finish complete and operatonal in all respects |
| 10 | ELECTRIC HOT AIR OVEN (REPUTED MAKE) : -0 Superior laboratory electriceven thermostatically controlled or with Digital controller cum indicator with safaety alarm . It must be double walled with outer body made of MS powder coated & inner madeof stainless steel , It must haveprovisionfor horizontal ribs for adjusting trays and any height . Equipment must have side heating /ait circulating fan to distribute the temperaturre range 50 degree centrigrade to 25 degree centrigradewith air ventilator . the size of oven must be 450x450x450 CM with size tolerance + 10mm equipment must operate under 220 V (15%) 50HZ Single phase AC Supply,Equipment must be Good make /manufacture with finish complete and operatonal in all respects |
| 11 | PRECISION ELECTRONIC/DIGITAL BALANCE with Dual Power Operation (AC/Battery) 400gm - 600gm capacity with read out of at least 0.01gm reproductibility of 0.01gm (Complete & Operational in all respects |
| 12 | PRECISION ELECTRONIC/DIGITAL BALANCE with Dual Power Operation (AC/Battery) \" Superior brand precision digital balance 5 Kg capbale of measuring atleast 1gm to 5 Kg with permissible error |
| 13 | PRECISION ELECTRONIC/DIGITAL BALANCE with Dual Power Operation (AC/Battery)Superior brand precision digital balance 5 Kg capbale of measuring atleast 5gm to 30 Kg with permissible error(Complete and operational in allrespects) |
| 14 | PRECISION INFARED Therometer : Digital non contact infared therometer (Fluke or superior make) with back light LCD Display battery powered with minimum operational temperature range of -20 Degree to 300 Degree for better display resolution of atleast 0.1 degree per F suitable spectular responsive class 2- lazer power with display hold feature. (Complete and operational in allrespects) |
| 15 | PRECISION PROBETherometer : Digitalcontact type Probe therometerwith minimum opertaional temperature range 24 Degree to 300 Degree or better display resolution of atleast 0.1 Degree F. (Complete and operational in allrespects) |
| 16 | AGGREGATE IMPACT TESTING MACHINE . (As per speecfication of IS 9377) Standard aggregate impact testing machine for determination of impact value for small size mineral aggregates / stocks(Equipment must be superior make manufacture and finish complete in all respect |
| 17 | ENAMEL EI-TRAYS: Sam purpose Enamel Tray /plates/Bucket of following mimimum sizesComplete & Opertaional in all respects |
| 18 | 250mm x300m Tray |
| 19 | 450mm x 60mm - Tray |
| 20 | FLAKENESS APPARATUS (SHPE TEST): As per specification SP-36 IS 2386 Part-I (Equipment must consists of following thickness guage manufactured from heavy gauge steel with IS certifcation stamp(Equpment must be of good make and manufacture and finish complete & operational in all respects |
| 21 | ElongationAPPARATUS (SHPE TEST): As per specification SP-36 IS 2386 Part-I (Equipment must consists of following thickness guage manufactured from heavy gauge steel with IS certifcation stamp(Equpment must be of good make and manufacture and finish complete & operational in all respects |
| 22 | STANDARDVICAT APPARATUS (Cement Testing) : Equipment must be provided for determinationof consistency of standard cement paste and must initial final setting times of cement . Equipment must be in conformation with IS : 5513 - 1976 with following minmium specifications; 1) A stable frame with vertically moveable rod to accomodate consistency plunger and setting time needles and having a cap at the top. 2) Vict mould in the form of frustum of a cone with internal diameter of 60mm at top 70mm at the bottom and a height of 40mm . 3) spilt type vicat mould with clamping ring . 4) MS Base plate & Class base - plate for the mould . 5) intial setting the needle. 6) Standard consistency plunger (Equipment /Supply must be of Superior make and manufacture and finishcomplete in all respects |
| 23 | LE - CHATELIER SOUNDNESS TEST APPRATUS (CEMENT): LE- Chateclier Moulds with IS Certification must be suplied for determination of Countness of cement and class A and Class B time . The appratus must be confirmation with IS 6514, IS 1727 IS: 2645, IS 4031, IS 6932 (Part - 9) with following minimum specifications.1)Orit Spilt Cylinder mould 30 mm dia x30mm high made ofspong brass with two indicators arms strongly soldered on either sides of spilt . 2) Two glass plates 3) One load weight approximately 100gms. 4)(Equipment /supply must be of superior make .manufacture and finish , complete in all respects |
| 24 | LE-Chatelier WATER BATH WITH Controller:Equipment must be compatible withrequirements of LS , Soundless. Test with following minimum specvifications: 1) Water bath must be doubel walled made from heavy gauge steelness steel sheets for Maintaining of Tempature ofwaterof 27degree c with proper insulation provided between the walls operational at 220v +10v single phalse 50Hz AC Supply Equipment must be of superior make/ Manufacture and finish COMPLETE IN ALL RESPECT |
| 25 | SLUMP TEST APPRATUS: As per IS Specifications IS 7320) Apparatus must be complete for determination of slum of fresh concrete for measuring its consitency for agregate size less then 38mm appratus must include standard sizle slump cone base plates & tamping road > Equipment /supply must be of sperior make/maunufacture and finish complete in all respects. |
| 26 | CEMENT MORTAR MIXER: Equipment must be provided for prepation of plastic mortar of cement and pozzalanic material for making types of test specimens in the laboratory : Equipent must be in confirmation with IS : 10890 - 1984 , IS 1727- 1967, IS 4013 and must comprise of following specifications: 1) A stainless steel mixing bowl of about 6 litre capacity , which can be held with the mixing appratus and its height adjustable . 2) Stainless Steel mixing paddles of standard /specified shape and dimension which can be attached or removed easily . 3) A Power /motor driven mixer which simultanously impart two motions to mixing paddlei.e revolving and planetary . they being opposite to one another in directions. 4) A two spend gear box (low/high) to revovle paddle at approximately 140rmp , 95 rmp and 285x 10rmp , pm with correspondng planteory motion of 62x5rpm and 125+-10Rpm respectively 5) All accessories like crapper cleaning bresh etc . Equipment /supply must be of sperior make/maunufacture and finish complete in all respects. |
| 27 | BITUMEN BINDER CENTRIFUGE EXTRACtor) As per relevant IS Specifications ASTM D 2172: manually operated BitumenBinder Centrifuge extractor for bitumenious mix up to 1.5 Kg capcaity with hand speed control with filter paper Dissas (Set of500sheets. Equipment /supply must be of sperior make/maunufacture and finish complete in all respects._ |
| 28 | SOFTENING POINT APPARATUS (RING & BALL METHOD) The test apparatus must be as per IS 1205A STMD36 relevant specifications for determination of softening temperature of bitumenusing ring and ball method. Equipment must have built in heating facility , magenitc stirrer and temperature controller . Apparatus must be operational for 220V , 50HZ Single Phase AC Supply, Equipment /supply must be of superior make/maunufacture and finish complete in all respects. |
| 29 | DUCTILITY APPARATUS (ELECTRICALLY OPERATED WITH COOLING ARRSANGEMENTS): The test apparatus must be as per IS 1205ASTMD113 relevant specifications for determination of ductility of bitumen using control elongation (constant speed) by way of ductility machine. Equipment must have build in water bath with heating facility using electric pump circulator andheater . Equipment /supply must be of superior make/maunufacture and finish complete in all respects. |
| 30 | CONSISTENCY TEST APPARATUS: The test apparatus must be as per IS 2720 Part 5 IS 9259 relevant spectifiactions for determination of consitstency (liquid Limt) of soils by casagrade method. |
| 31 | SAND REPLACEMENT FIELD DENSITY APPARATUS: (Small)The test apparatus must be as per IS 2720 Part 28relevant spectifiactions for determination of consitstency (liquid Limt) of soils |
| 32 | LOSS ANGELES ABRASION TESTINGmachine WITH ABRSIVE CHARGE: IS STANDARD IS 0070.to determine the resistance to ware of small size coarseaggregate and crushed rocks detactable shelf, drum rotation of 30-33 rpm with electric motor and heavy duty reduction geasr. Supplied with tray for collection of material , operational sutibality 415V , 3 phase , 50HZ , AC supply . Abbresive charge set of12 hradened 48mm dia ditgital controller box. Equipment /supply must be of superior make/maunufacture and finish complete in all respects. |
| 33 | Universal Pentrometer with pentraton cone and bitument pentrationKIT IS 1448 Part 60 ASTM:D937, IP: 179 , BS : 4698 ASTM : D 217 , IP : 50 ISO : 2137 , EN: 1426 , 13179 - 2 > Equipment must of following replicable parts. 1) Universal pentrmeter with adhustable head and display 01 No. 2) Pentration cone for deterimnation of consistency of lubricating grease andoils (1 No) |
| 34 | Cleveland Fash (Open) fire Point Apparatus. (As per specifications of IS 1445 -P69 IS 73-2013. Equipments must be capabile for determinationflas& fire point bitument . The flas cup must be made of brass with insulated handle equiment must have metal heating plate electrically operated with energy regulator and gas jet assembly . Complete in allrespects with all optional accessories |
| 35 | ABSOLUTE (DYNAMIC) & KINEMATIC VISCosity APPARATUSAs per speecification of IS : 73 2013 . Equipment must comprise of following : 1) 2 no. imported viscometer tubles(cannon - Manning vaccume viscometer) made ofborosilcate glass with size no. 12 (IS:1206 part -II for determination of sbsulte viscocity in the range of 300 - 8000 pulse at 60 Degree C along with calibration certificate . 2) 2 No imported viscometer tubues Cannon -Fonske Viscometer madeglass wit size No. 350 IS : 1206 Part -IIfor deterimnation ofviscoscity in the range of 30-500 SI at 135 Degree along with calibaration certificate. 3) 01 No. Oil free cavumme application systemwith 4 lines with vacuume rangeupto 300mmog HgAND LEAST MEASURINGAND MANUFACTUREETC(cOMPLETE & OPERATIONAL IN ALL RESPECTS WITH ALL OPTIONAL ACCESSORIES |
| 36 | pavement depth/thickness guage. Ms Thickness Gauge with manimum gauging dimeter 15000 (Complete & Operational in all respects) |
| 37 | SOIL HYDROMETRO.: AS per IS specifications /SP 36 IS 2720 part -4 IS 3014 for Soils /fines with > 10% passing 75micron SIEVE |
| 38 | SOIL PYCNOMETER (AS per reference standard IS 2386 for deterimantion of specific gravity of clays , sands and gravals of grain soil less than 10mm . |
| 39 | Density Botle as per reference standard IS 2720 Part - 1> It must consist of folowing cap[acity. Superior lab. Glass bottles with caplier vent leake proof |
| 40 | 25ML |
| 41 | 50ML |
| 42 | 100 ML |
| 43 | Table Mounted marshal Stabilty Apparatus: as per IS ASTMD 1559 D- 6927 Specifications . Equiment must consist of Marshals stability loading frame 50 KN capacity with prowing ring , single speed with plattin speed 50.8mm per minute precise speed sutiable to operate on 220V , 50HZ Single phase AC Supply limit switch protection for both upward and downward travel. Following must be suplied with the apparatus.1) Marshals steel compaction hammer , weight 4.5 Kg with a free fall of 457 mm 02 No. 3) hydrulic sample eject 01 No. 3) sample breaking head with load transfer bar and flow measurement arrangment using dial gauge |
| 44 | HYDRALIC LOADING APPARATUS for LOAD Tests 2000 KN: for Conduction of pile load test as per IS specifications SP 36 IS 1888 IS 3014 . Equiment must include hydralic jack 2000 Kilo Netwon (200 Mt) Equipment must include heavy duty hand operated remote hydralic oil pumping unit High, pressure flexible pipe |
| 45 | ANALOG ELECTRICALLY OPERATED CTM : 1000KN Compression Testing Machine conforming to IS 14858 with plus 1% accuracy load range 100 KN (100T) with LC 5 KN maxium clearance between platins 390mm . Paltin size 222mm dia . Plain hardeness 612HV (55HRC) . Pistion dia 157mm , Piston stroke 50. Motre HP 1 |
| 46 | Califomia Bearing Ratio Apparatus (As per Spectifications of IS:9669, IS 2720-XVI,etc) Specification of CBR Meukis The matennis for construction of the various equipment shall be as given in above standard.Mould:the Mould dia shall be 150mm Coller: the coller shall be made from same material as theat of mised tow smillar ears as in the case of the ould shall be cost intergal with the body or weldedSase Plate: A sultable seating about 2mm deep shall be provided on the top face for proper seating of the mould Equipment must be of superior make/ Manufacture and finish COMPLETE IN ALL RESPECT |
| 47 | SOIL COMPACTION APPARATUS As per sp0ecification/ Ref. Standard of IS: 10074(Part VII) Equipment must consist of following for performing tests to determine density moisture relations for soils Standard compaction Apparantus (Light compaction standard Proctor) consisting of 1000 MNl valume fun metal mould Base plate & Coller Hammer of 2 Kgs with 310 mm tall Equipment must be of superior make/ Manufacture and finish COMPLETE IN ALL RESPECT |
| 48 | Soil compaction apparatus (Modified)(As per IS 2720 Part 8 IS 9198 IS 10074Modified compaction mould in mild steel (Heavy compaction/ Modified Proctor) consisting of 2250 Ml valume mould, 150mm diameter and 127.3 mm height Rammer/ Hammer weight 4.90 Kg with controlled free vertical tall of 450mm with 50mm dia meter of compaction face end with base plate and colour Equipment must be of superior make/ Manufacture and finish COMPLETE IN ALL RESPECT |
| 49 | DYNAMIC CONE PENETROMETER FOR IN PLACE CBR (AS PER ASTM D6951)DynamicCone Penetrometer (DCP ut used for rapid in site measuement of the structural properties of existing read pavement constructed with unbound materias. The unit incorporates an 8 KG weight with a drop of 5475 mm and a 20mm diameter cone fitted to the end of the shaft, allowing measurements to be made down to a depth of approaximately 850 mm 8 KG weight drpooing mass trough a height of 575 mm anvil with driving rod Penetration rod with 60 degree, 20 mm dia conespanners Tommy bar bottle of adhesive Al contained in a carrying case Case dimensions (1200x350x200 mm approx.)Weight approx 30 Kg |
| 50 | Cement Mortar Cube Moulds Cube Mould of 70.6 mm size conforming to IS: 10086-1982Supply must be of superior made/ Manufaccture and finish, COMPLETE IN ALL RESPECT |
| 51 | Compaction Factor Apparantus (AS per IS 5515)The apparatus shall consist of two conical hoppers mounted above a cylindrical recei ver The hoopers shall be of rigid constructions true to shape and finsihed smooth inside. They shall be made of cast brass conferming 292-1961. |
| 52 | Bouyancy Balance The bouyancy Balance consists of a rigid support frame incorporating a water tank mounted on a platform. A mechanidcal lifting device is used to raise the water Tank thru the frame height immersing the specimen suspended below the balance The model operates with an electronic top pan programmed balance of 15 Kg capacity readable to 0.5G |
| 53 | Laboratory Electric Hop Plates: Equipment must comprise of following minimum specification 1. SS/MS Top with size of 450mm x600mmx150mm (with dimension allowance of 100mm 2. Thermostat contral and regulartor.3. Energy consumption up to 2.0 KW opeationa of 220V 110 V single phase 50Hz AC |
