}

Repairs Replacements To Various Electromechanical Equipments At Various Bore Wells Under National Mission On Saffron- 1 Uplifting / Extraction Of Submersible Pump / Motor Assembly Along With All The Column Pipes Of 100Mm Dia, 12Mm Dia Steel Wire Rope An, FOR Bore well sites under NMS-Jammu And Kashmir

Government Departments has published Repairs Replacements To Various Electromechanical Equipments At Various Bore Wells Under National Mission On Saffron- 1 Uplifting / Extraction Of Submersible Pump / Motor Assembly Along With All The Column Pipes Of 100Mm Dia, 12Mm Dia Steel Wire Rope An. Submission Date for this Tender is 10-12-2021. Screws Tenders in FOR Bore well sites under NMS Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

30109317
Repairs Replacements To Various Electromechanical Equipments At Various Bore Wells Under National Mission On Saffron- 1 Uplifting / Extraction Of Submersible Pump / Motor Assembly Along With All The Column Pipes Of 100Mm Dia, 12Mm Dia Steel Wire Rope An
Open Tender
Indian
Jammu And Kashmir
For Bore Well Sites Under Nms
10-12-2021

Tender Details

Repairs Replacements To Various Electromechanical Equipments At Various Bore Wells Under National Mission On Saffron- 1 Uplifting / Extraction Of Submersible Pump / Motor Assembly Along With All The Column Pipes Of 100Mm Dia, 12Mm Dia Steel Wire Rope And Submersible Cable From The Bore Wellcasing Pipe For Necessary Checkup To Submersible Pumping Equipment. The Job Is To Be Done By Using Heavy Duty Tripod Stand, Chain Pulley Block Etc. The Pipes Are To Be Clamped & Then Uplifting / Extracted One By One After Removing Nuts, Bolts, Washers Etc. The Job Is To Be Carried Out Utilizing The Services Of Skilled Laborers With Utmost Care So That The Components Are Not Damaged. ( Well No. 93 & 121 ) 2 Repairs To Submersible Pump ( 7.5Hp ) Of Well No. 93 By Way Of Unscrewing The Pump Base To Reach The Impeller Chamber, Then Remove The Screw From The Chamber And Take Out The Impeller And Clean Out The Chamber And Wash The Impeller. Shake Off Excess Water & Replace The Impeller Inside The Chamber. The Job Includes Providing And Fitting Of New Upper / Lower Bearings And Shaft Seal And Diffuser, Shaft Washer, Thrust Washer And Cleaning Of Filters. Put The Chamber Back In Place And Re-Assemble Pump With Base And Screw. The Job Includes Shifting, Handling, Loading, Unloading, Carriage Of Above Components From Site Of Work To Workshop And Back After Its Repairs / Replacement. The Job Includes Testing Of Equipment After Lowering Down. 3 Repairs To Submersible Pump ( 5 Hp ) Of Well No. 121 By Way Of Unscrewing The Pump Base To Reach The Impeller Chamber, Then Remove The Screw From The Chamber And Take Out The Impeller And Clean Out The Chamber And Wash The Impeller. Shake Off Excess Water & Replace The Impeller Inside The Chamber 4 Lowering Of Submersible Pump Motor Assembly After Repairs Along With All The Column Pipes To Be Held In Position With Steel Wire Rope After Replacing Worn Out Nuts, Bolts, Washers Etc Wherever Required In To The Well Casing Pipe. The Job Includes Reconnecting The Submersible Pump Motor With The Motor Control Panel & Its Testing On Full Load. ( Well No.93 & 121 ) 5 Providing And Fitting Of Seven No’S ( 07 ) G.I B Class 100Mm Dia. Additional Column Pipes At The Bore Well.117 ( Each Pipe Of 3 Mtrs ) 6 Providing And Fitting Of 3 Core 10 Sqmm Additional Submersible Cableat Well No.117 ( 45Mtr ) & 121 ( 30Mtr ) Make: Havells / Finolex / Polycab 7 Providing And Fitting Of Nuts & Bolts By Way Of Replacing Of Old Worn Out Nuts And Bolts. ( Well No. 93 &121 ) 8 Providing And Fitting Of New Washers By Way Of Replacing Of Old Worn Out Washers. ( Well 93 & 121 ) 9 Providing And Fitting Of 12Mm Dia Additional Steel Wire At Wewll No.117 10 Repairs To 63 Kva D. G Setby Way Of Removing Of Damaged Wiring And Providing And Fitting Of New Wiring & Items. The Job Includes Harness Repair, Pannel Wiring, Repairs To Exhaust Manifold, By Way Of Welding Wherever Required. The Job Also Includes Providing And Fitting Of Hose Pipe For Air Cleaner, Fuel Level Sensor, 100 Amp 3Pole Mccb , Sleeve For Air Cleaner Hose, Rubber Hose For Turbocharger, Battery Terminal Set & Fuel Pipe.The Job Is To Be Carried Out Byutilizing Service Of Skilled / Technical Hand Persons With Utmost Care So That The Components Are Not Damaged. Well No.117 11 Supply , Installation, Testing And Commissioning Of Power Cable, 3 Core 50 Sqmm Xlpe Conforming To Is 7098 / Part-1 / 1988 Aluminium Cable For Well No. 121Make: Havells / Finolex / Polycab 12 Supply , Installation, Testing And Commissioning Of Volt-Ammeter To Be Installed At Main Control Pannel At Well No.121 13 Supply , Installation, Testing And Commissioning Of Volt Meter To Be Installed At Main Control Pannel At Well No.121 14 Supply , Installation, Testing And Commissioning Of Ammeter To Be Installed At Main Control Pannel At Well No.121 15 Repair / Replacement Of Digital Display At The Control Pannel Of Dg Set Installed At Well No. 121

Key Value

Document Fees
INR 200 /-
EMD
Refer document
Tender Value
INR 1.74 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail