Supply Of Furniture For Law Department And Other Various Departments At Cdlu, Sirsa. Supply Of Furniture For Law Department And Other Various Departments At Cdlu, Sirsa. , Supply Of Three Seater Dual Deskdual Desk Of Overall Size 1525Mm X 990Mm Made Out Of Ms Pipe Frame 40Mm X 25Mm X 1.6Mm Thick As Per Sketch Shall Accommodate 3 Persons At A Time. The Seat And Back Of The Desk Shall Be Made Of 25Mm Thick Pre-Laminated Post Formed Hdf Board Of Size 1525Mm X 380Mm And 1525Mm X 300Mm Respectively, Duly Covered Side Edges With Hot Pressed 2Mm Thick Pvc Lipping. The Seat And Back Shall Be Fixed Over Ms Frame With Studs Inserted Into The Board. The Writing Platform Of The Bench Shall Be 1525Mm Long And 380Mm Wide Made Of 25Mm Thick Pre-Laminated Post Formed Hdf Board With 2Mm Thick Hot Pressed Pvc Lipping, Fixed Over Frame Of Ms Pipe With Studs Inserted Into The Board. The Number Of Bolts Shall Be Provided As Per Requirement To Fix The Board Accurately. The All Steel Components Shall Be Pre-Treated In 4 Steps Anticorrosion Treatment (Degreasing, Pickling, Phosphating And Passivation) Before Being Powder Coated And Baked In Oven So As To Achieve 40-45 Micron Thickness Of Powder. , Supply Of Podium For Lecture Hall The Lecture Dais To Be Made Out Of 19 X 19 Sq. Mm Crca Pipe 1.2Mm Thick Having A 3 Step Pedestal At Base To Impart Elegance& Rigidity To The Dais. The Frame To Be Cladded With 18 Mm Thick Hdf Pre-Laminated Board. The Height Of The Podium Facing The Speaker Is 1090Mm For A Total Front Height Of 1200Mm. The Standing Surface On Top Having A Working Area Of 550Mm X 430Mm To Be Provided For Addressing The Audience; The 550Mm Front Edge Of This Board Is Post Formed Board. One Shelf Is Provided Below The Top Post Formed Surface For Any Accompaniment For Use Of The Speaker/Lecture. A Footrest Is Provided At 175Mm Above The Base For The Comfort Of The User. All Metal Components Are Powder Coated And Oven Baked After Proper Pre-Treatment As Per Sketch. , Supply Of White Writing Board Supplying Wall Mounting White Writing Board Having Size 1200 X 3600Mm, Writing Top Surface Shall Be Made Of Steel Sheet Of Thickness 0.3 To 0.4Mm And Shall Have Vitreous Enameled Coating Of 0.11Mm Minimum Thickness On Top And 0.03Mm Minimum On The Back Pasted Over 6 To 9Mm Thick Mdf Board With Electro Galvanized Backing Sheet. The Frame Shall Be Made Of Anodized Extruded Aluminum Alloys Hollow Section Designation 63400 As Per Is1285-2002 (Re-Affirmed) Of Size 20Mm X 16Mm X 1.2Mm Along With Perfect Hanging System On The Wall. The Top Of Writing Board Shall Be Free From Waviness And Shall Show No Scratches When Hb Two Three H Pencils Are Used For Writing. The Surface Shall Show Excellent Erased Ability When The Specified Writing Medium Is Used. It Should Be Possible To Fully Erase The Marking Of Permanent Markers Pens Using Methanol Of Brand Promark Or Equitant As Per Sketch. , Supply Of Office Table Bigexecutive Table (A Type) Specifications: Supplying Modular Table In Completely Knock Down Conditions With An Overall Size 2600Mm X 2100Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Be Made Up Of 36Mm Thick (Top) And 9Mm Thick (Base Top) Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Base Of The Top Shall Be Covered With The Assistance Of 9Mm Thick Extruded Aluminium Frame On The Edges. Flapper Box Shall Be Enclosed At Table Top. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degrees Celsius. The Table Top Shall Be Supported On Particle Board Based Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 18Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Gable End Leg Shall Be Provided With 70Mm Width Made Up Of Extruded Aluminium Channel Having Aesthetically Appealing And Corrosion Resistance Property. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18 Mm Thick Pre-Laminated Particle Board In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Shall Have Side Unit For Storage Purpose With An Overall Size 1200Mm X 550Mm X 760Mm. The Side Unit Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Top And Side 36Mm Thick, Drawer Base 9Mm And Other Parts 18Mm Thick Like Shutter, Back, Facia, Panel Etc. It Shall Have 2 Drawer And 2 Shutter. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. A Fixed Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 675Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. The Drawer Base Shall Be 9Mm Thick And Other Parts Like Side, Back, Facia Shall Be 18Mm Thick. It Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Locked With One Single Key. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Molding, Skirting Shall Be Provided At Bottom. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Supply Of High Back Revolving Chair Executive Chair (A Type)Specifications:-Supplying Ergonomically Designed, Comfortable & Aesthetically Appealing High Back Chair. The Seat Shall Be Made Of 12Mm Thick Hot Pressed Commercial Plywood Upholstered With High Resilience Polyurethane Foam (25+19)Mm Thick Having Density (40+40)Kg/M³ With Beage Leatherette Tapestry 0.8Mm Thick And 535 Gsm And The Back Shall Be Made Of Hot Pressed Plywood 12Mm Thick Upholstered With High Resilience Moulded Polyurethane Foam 40Mm Thick Having Density 40 Kg/M³ With Beige Leatherette Tapestry 0.8Mm Thick And 535 Gsm With Contoured Lumbar Support Which Helps To Provide Full Back Support And Maintain The Natural Curvature Of The Spine. Back Shall Be Movable Type With The Assistance Of Gas Lift Provided Under The Seat And Lever In The Arm. The Armrest Shall Be Used Cushion Arm With Leatherette Tapestry And Ss Shiny Chrome Finish Completely Joint With Seat And Back. The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Gas-Lift To Suit Them Using The Lever Under The Seat. The Pedestal Shall Be Made Up Of Ms Crca Chrome Plated Having Pitch Circle Dia 700Mm Fitted With 5 Nos. 50Mm Twin Wheel Castors Which Shall Be Made Of Injection Moulded Black Nylon 30% Glass Filled Having Self-Lubricating Property For Friction Free Movement. The Seat Size Shall Be 480±10Mm (D) X 520±10Mm (W) And Back Size Shall Be 520±10Mm (W) X 710±10Mm (Ht) From Seat. Overall Height Shall Be = 1190±10Mm, Overall Depth = 750±10Mm & Overall Width = 750±10Mm. , Supply Of Visitor Chairvisitor Chair (A) Specifications: - Supplying A Visitor Chair With Ergonomic Design For User Comfort & Aesthetically Appealing. The Seat And Back Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (40+40) Mm Thick Having Density (40, 32)Kg/M³ In Seat And (30+30)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherette Tapestry 1Mm Thick And 571 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Back Support. The Chair Shall Be Supplied With Polypropylene Arm With Cushion Base Fabric Covering Top. The Frame Structure Shall Be Cantilever Support Type Made Of Crca Powder Coated 50-60Μ Thick Round Pipe Of Dia. 28.5Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 500±10Mm (D) X 520±10Mm (W) And Back Size Shall Be 520±10Mm (W) X 625±10Mm (H) From Seat. Overall Height Shall Be = 1040±10Mm, Overall Depth = 680±10Mm& Overall Width = 660±10Mm. , Supply Of Ss Stackable Chairsupply Of Stackable Chair With S.S Legs, Polypropylene Seat And Back With Arms Of Size 600 W X 555 D X 765 H Mm As Per Novella-10 Of Nealkamal Or Equivalent Brand. , Supply Of Office Steel Big Almirah Big Almirahspecifications: Supplying Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm (W) X 485Mm (D) X 1980Mm (H) Including Legs. It Should Be Supplied With 4 Nos. Shelves I.E. 5 Loading Compartments. Door Shall Be Made Of 1Mm Thick And All Other Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf & Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Of Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 50-60 Micron. , Supply Of File Racksupply Of 5 Shelves, Closed Type Steel File Racks Of Size 1800X910x375mm, 100% Powder Coated Side &Amp; Shelves Made Up Of 0.8Mm Crca As Per Model No. Dks 14C Of Dlite Kom, Godrej, Geeken, Featherite, Nilkamal Or Equivalent. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 50-60 Micron As Per Sketch. , Supply Of Conference Chair Specifications: - Supplying A Mid-Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (40+40) Mm Thick Having Density (40 & 32) Kg/M³ In Seat And (30+30) Mm Thick Having Density (32, 32) Kg/M³ In Back. The Same Shall Be Upholstered With Fabric The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Polypropylene Arm With Cushion Base Leatherette Covering Top. For Seating Durability, The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm Gas-Lift To Suit Them Using The Lever Under The Seat. The Pedestal Should Have Five Legged Ms Crca Powder Coated With 50-60Μ Dft Thick Having Pitch Circle Dia. 660Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10Mm (D) X 520±10Mm (W) And Back Size Shall Be 520±10Mm (W) X 700±10Mm (H) From Seat. Overall Height Shall Be = 1160±10Mm, Overall Depth = 680±10Mm & Overall Width = 660±10Mm. , Supply Of Three Seater Sofaspecifications: - Supplying Three Seater Sofa That Shall Be Constructed From Natural Hard Wood And Marine Grade As Per Is: 710 Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Fabric Dual Tone. The Under Structure Shall Consist Of Ss 304 Grade Legs Having Cross-Section Area 40Mm X 20Mm X 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 550±10Mm (D) X 1650±10Mm (W), Seat Height = 450±10Mm, Overall Width = 2320±10Mm, Overall Depth = 900±10Mm & Overall Height = 820±10Mm. , Supply Of Glass Centre Table Specifications: - Supplying Centre Table With An Overall Size 1200Mm X 600Mm X 450Mm. The Top Shall Be Made Up Of 12Mm Thick Toughened Glass. The Profile Shall Be In Rectangle Shape With Bevelled Edges. The Bottom Storage Shelf Shall Be Provided With An Overall Size 1155Mm X 280Mm Made Of 8Mm Thick Toughened Glass With Bevelled Edges. The Glass Shall Be Supported On Vacuum Caps Situated Over Ss 304 Grade Pipe Frame. The Under Structure Shall Have Ss Pipe Frame Having Size 67Mm X 13.5Mm. There Shall Be Ppcp Shoe Provided To Avoid Scratches On The Floor. , Supply Of Revolving Executive Medium Backchair Specifications: - Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (40+40) Mm Thick Having Density (40 & 32)Kg/M³ In Seat And (30+30)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Fabric. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Polypropylene Arm With Cushion Base Leatherette Covering Top. For Seating Durability, The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm Gas-Lift To Suit Them Using The Lever Under The Seat. The Pedestal Should Have Five Legged Ms Crca Powder Coated With 50-60Μ Dft Thick Having Pitch Circle Dia. 660Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10Mm (D) X 520±10Mm (W) And Back Size Shall Be 520±10Mm (W) X 700±10Mm (H) From Seat. Overall Height Shall Be = 1160±10Mm, Overall Depth = 680±10Mm & Overall Width = 660±10Mm. , Supply Of Two Seater Sofa Specifications:- Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Fabric Dual Tone. The Under Structure Shall Consist Of Ss 304 Grade Legs Having Cross-Section Area 40Mm X 20Mm X 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 550±10Mm (D) X 550±10Mm (W), Seat Height = 450±10Mm, Overall Width = 1120±10Mm, Overall Depth = 900±10Mm & Overall Height = 820±10Mm. , Supply Of Office Table Supply Of Office Table Size Main Table : 1500Mm (L) X 900Mm (D) X 750Mm (H) With Side Unit As Computer Table Of Size 3 X 1.5 X 2.4The Table Shall Carry The Following Specification:Table Top 5(L) X 3(W) X 25Mm Thick Laminated Hdf Board Post Formed In Front And Rear &Amp; Sides Affixed With Pvc Lipping With Hot Melt Glue.Table Frame: Made From 30Mm Square Crca Pipe.Rear Cladding: 22G Crc Sheet.3 Drawer Unit On One Side: Fitted On Rhs With 5 Lever Lock 1 No. On The Top Drawer.Size: 560 (D) X 455 (H) X 355 (W), No. Of Drawers = Three (Body), Lockable With 5 Lever Single Lock Drawer Inner Size: 420 (D) X 125 (H) X 292 (W) Movement Over Frictionless Roller Slide Channels.Single Drawer With Swing Door Below: Fitted On Lhs, 5 Lever Lock On 1 N. Of Drawer And Also On 1 No. On Swing Door And Provision Of Key Board And Cpu Trolley Body Size: 560 (D) X 275 (H) X 320 (W) Drawer Inner, Shade Approved By The Department. Paint Colour: Siemens Grey, Ta Grey Silver As Or Any Shade Approved By The Department.Finish &Amp; Painting - Epoxy Powder Coated And Baked In Oven At A Temperature Of 200 Degree After Pre-Treatment Of Metal Parts For Degrading, De Rusting, Phosphating And Passivation For A Compete Scratch Resistant Surface And Superb Finish. , Computer Tablespecifications: Supplying Computer Desk With An Overall Size 1500Mm(W) X 750Mm(D) X 750Mm(H). It Should Have Work Top Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Board Shall Be Supported On Fixed Pedestal At One End And Fixed Cpu Unit At Another End. The Desk Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Desk. The Modesty Panel Shall Have The Size 690Mm X 600Mm With 18Mm Thick Pre-Laminated Particle Board Connected With Both End. 18Mm Thick Pre-Laminated Board Base Keyboard Tray Shall Be Provided With An Overall Size 684Mm X 350Mm. The Keyboard Trey Shall Be Operated By Sliding Channel To Enable Smooth Operation. A Fixed Pedestal Shall Be Provided With The Size 400Mm X 620Mm X 725Mm At One End With 3 Drawer Operated On Roller Channel And 1 Filing Drawer Operated On Ball Bearing Channel. All Drawer Shall Be Operated With Ss Handle With Multi-Purpose (Mp) Locking Mechanism. Other Side Of Table Open Type Storage Shall Be Provided With The Size 400Mm X 600Mm X 725Mm Having One Adjustable Shelf To Accumulate Cpu. Complete Under Structure Made In 18Mm Thick Pre-Laminated Particle Board With Appropriate Edge Banding And Drawer Base Shall Be 9Mm Thick. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding Skirting Shall Be Provided At Bottom Of The Pedestal At Both Sides. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007. , Supply Of Office Steel Almirahs Small Almirahsmall Almirah Specifications: Supplying Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 760Mm (W) X 430Mm (D) X 1270Mm (H) Including Legs. It Should Be Supplied With 3 Nos. Shelves I.E. 4 Loading Compartments. Door Shall Be Made Of 1Mm Thick And All Other Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf & Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Of Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 50-60 Micron. , Supply Of Pin Up Notice Board With Doorsupply Of 1200Mm X 900Mm Pin Up Notice Board With Door Notice Board With Rear Panel Of Laminated Sheet, Over All Pin Ability Depth Of Board 9Mm, Core Material Thickness 9Mm, Orientation As Portrait/Landscape Front Glass Lockable Cover, Frame Material Of Board Aluminium, Front Layer Of Soft Board With Fabric And Corner Protection. , Supply Ofdual Deskdual Desk Of Overall Size 1140Mm X 990Mm Made Out Of Ms Pipe Frame 40Mm X 25Mm X 1.6Mm Thick As Per Sketch Shall Accommodate 3 Persons At A Time. The Seat And Back Of The Desk Shall Be Made Of 25Mm Thick Pre-Laminated Post Formed Hdf Board Of Size 1140Mm X 330Mm And 1140Mm X 300Mm Respectively, Duly Covered Side Edges With Hot Pressed 2Mm Thick Pvc Lipping. The Seat And Back Shall Be Fixed Over Ms Frame With Studs Inserted Into The Board. The Writing Platform Of The Bench Shall Be 1140Mm Long And 380Mm Wide Made Of 25Mm Thick Pre-Laminated Post Formed Hdf Board With 2Mm Thick Hot Pressed Pvc Lipping, Fixed Over Frame Of Ms Pipe With Studs Inserted Into The Board. The Number Of Bolts Shall Be Provided As Per Requirement To Fix The Board Accurately. The All Steel Components Shall Be Pre-Treated In 4 Steps Anticorrosion Treatment (Degreasing, Pickling, Phosphating And Passivation) Before Being Powder Coated And Baked In Oven So As To Achieve 40-45-Micron Thickness Of Powder. , Supply Ofoffice Chair Of Following Specification:- Office Chair (A) Specifications: - Supplying A Visitor Chair With Ergonomic Design For User Comfort & Aesthetically Appealing. The Seat And Back Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (40+40)Mm Thick Having Density (40, 32)Kg/M³ In Seat And (30+30)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherette Tapestry 1Mm Thick And 571 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Back Support. The Chair Shall Be Supplied With Polypropylene Arm With Cushion Base Fabric Covering Top. The Frame Structure Shall Be Cantilever Support Type Made Of Crca Powder Coated 50-60Μ Thick Round Pipe Of Dia. 28.5Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 500±10Mm (D) X 520±10Mm (W) And Back Size Shall Be 520±10Mm (W) X 625±10Mm (H) From Seat. Overall Height Shall Be = 1040±10Mm, Overall Depth = 680±10Mm& Overall Width = 660±10Mm. , Supply Of Office Tableclerk Tablespecifications: Supplying And Placing A Modular Table With An Overall Size 1200Mm X 600Mm X 750Mm. The Top Of The Table Shall Be Made Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Of The Top Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Crca Rectangle Pipe Frame Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Table Understructure Shall Be Supplied With Crca Rectangle Pipe Having Cross-Section Area 40Mm X 20Mm. The Gable End Shall Be Given At One Side Made Up Of 0.8Mm Thick Perforated High Yield Strength Crca Sheet Of Grade D Confirming To Is:513. Fixed Pedestal Unit With Powder Coated Metallic Body Shall Be Supplied With 3 Nos. Of Drawer I.E. 2 Box+1 Filing At One Side. All The Drawer Shall Be Synchronized Locked With Central Locking Mechanism By One Single Key. The Drawer Shall Be Operated With Abs Plastic Recessed Handle. The Manufacturer Shall Have Basic Quality And Safety Certifications Like Iso-9001:2015, Iso-14001: 2015, Iso-18001:2007. , Supply Of Bookcase With Scissor Mechanism Of Following Specification:- Supplying Metal Book Case With An Overall Size 915 Mm (W) X 320 Mm (D) X 1750Mm (H). The Book Case Shall Be Supplied With 4 Nos. Of Individual Compartments. Top, Back & Side Panels Shall Be Made Of 0.8Mm And Rest 1Mm High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Each Door Shall Have Individual Locking Provision And 4 Mm Thick Transparent Glass For Clear Inside Vision Secured In A Metal Frame Through Rubber Gasket. Each Door Shall Have Scissor Mechanism For Receding Inside The Top Of Respective Compartment Which Ensures Parallel & Smooth Movement. Each Door Shall Have Plastic Side End Caps As Handle Which Is Easy To Grip. Each Compartment Has A Storage Shelf Having Uniformly Distributed Load Capacity Of Each Shelf Is 40 Kg Maximum. The Finish Is Epoxy Polyester Powder Coated To The Thickness Of 40-60Μ. Adjustable Leveler Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level & Support Structure. , Supply Of Newspaper Stand Without Storage Cabinet Made Of Crca Heaving Frame Size: 30 X 39 And 2 Numbers Of Sloping Reading Platforms 24 X 40 Size. Each Reading Platform Shall Be Made From 18Mm Thick Pre-Laminated Mdf Board And It Shall Also Cover Full Spread Of Newspaper. There Is A Provision For Keeping The Current Newspapers On An Looking Horizontal Platform As Per Sketch. Temporary Storage Platform Having Size 22 X 37 Size, Made From 18Mm Thick Pre-Laminated Mdf Board. In The Middle Of Reading Platforms Is Provided A Steel Strip Hinged At Top And Fixed With The Main Steel Frame And Thus Avoiding The Possibility Of Damage To The Reading Platform In Any Way Whatsoever. At The Lower Edge Of Newspaper Reading Platform Is Provided A Stay For Keeping Newspaper Spread In Position Top Frame: Consisting Sloping 4 Nos Square Pipes And One Horizontal Pipes On Top And Two Horizontal Pipes On Both Side Of The Platform Shall Be Of 25X25x1.2Mm Crca Square Pipe To Be Supported On 25 X 50 X 1.2 Mm Crca Square Pipes. Middle Frame Consisting 4 Nos. Vertical Supports Made From 25 X 25 X 1.2Mm Crca Square Pipes And Base Frame Is Made From 2 Nos 25 X 50 X 1.2Mm Crca Square Pipe. Also At The Bottom Are Provided Level Adjustors For Providing Stability To The Newspaper Reading Stand And To Overcome Floor Irregularities. All Steel Components Of The Cabinet Shall Be Pre-Treated In 4-Step Anti-Corrosion Treatment (Degreasing, Pickling, Phosphating Passivation) Before Being Powder Coated And Baked In Oven So As To Achieve 40-45 Micron Thickness Of The Powder.
