Bids Are Invited For Ppgi Sheet Fence (Angle Iron Picket 3300Mm(50 X 50 X 5Mm) Weight Approx 12.54 Kg)For : Thalela - Angle Iron Picket 3300Mm(50 X 50 X 5Mm) Weight Approx 12.54 Kg As Per Is-808 : Re-Affirmed 1999 (Amdt –I) Includingwelding, Cutting, Drilling Hole, 150 Mm Long Angle Iron Same Sizes Should Bewelded At Bottom Of The Picket As A Fastening . Each Pickets Tobe Placed At A Distance Of 2.80 M Centre To Centre. Picket Shall Be Required 2 Nos Of 12 Mm Dia Hole Below 1.00 Mtr Top Of The Picket For Fixing Of Support Picket. Picketsshall Be Painted A Coat Of Red Oxide Primer Complete All Asper Drawing & Specified As Per Is – 2721 – 2003. Make -Tata/ Sail/ Jindal/Apollo Steel/ Rinl/ Surya/ Prakash.For : Thalela , Ppgi Sheet Fence (Angle Iron Picket 2400 Mm Long (50X 50 X 5Mm) Weight Approx 9.12 Kg With Cutting05 Nos )For : Thalela - Angle Iron Picket 2400 Mm Long (50X 50 X 5Mm) Weight Approx 9.12 Kg With Cutting05 Nos Notches For Fixing Of Barbed Wire As Per Is-808 : Re-Affirmed 1999 (Amdt –I) Includingwelding And Cutting Of Notches Etc Complete. Long Angle Iron Pickets Tobe Placed At A Distance Of 3.0 M Centre To Centre. Picketsshall Be Painted A Coat Of Red Oxide Primer Complete All Asper Drawing &Specified As Per Is – 2721 – 2003. Make -Tata/ Sail/ Jindal/Apollo Steel/ Rinl/ Surya/ Prakash.For : Thalela , Ppgi Sheet Fence (Angle Iron Picket 1400 Mm Long (50X 50 X 5Mm) Weight Approx 5.32 Kg With Cutting03 Nos )For : Thalela - Angle Iron Picket 1400 Mm Long (50X 50 X 5Mm) Weight Approx 5.32 Kg With Cutting03 Nos Notches For Fixing Of Punch Tape As Per Is-808 : Re-Affirmed 1999 (Amdt –I) Includingwelding And Cutting Of Notches Etc Complete. Long Angle Iron Pickets Tobe Placed At A Distance Of 3.0 M Centre To Centre. Picketsshall Be Painted A Coat Of Red Oxide Primer Complete All As Specified As Perper Drawing & Specified As Per Is – 2721 – 2003. Make -Tata/ Sail/ Jindal/Apollo Steel/ Rinl/ Surya/ Prakash.For : Thalela , Ppgi Sheet Fence (Angle Iron Picket 2950Mm Long(50 X 50 X 5Mm) Weight Approx 11.21 Kg )For : Thalela - Angle Iron Picket 2950Mm Long(50 X 50 X 5Mm) Weight Approx 11.21 Kg As Per Is-808 : Re-Affirmed 1999 (Amdt –I) Includingwelding, Cutting Drilling Hole,150Mm Long Angle Iron Same Sizes Should Bewelded At Bottom Of The Picket As A Fastening.Angle Iron Pickets Tobe Placed At A Distance Of Every Third Picket Of The Fencing For Support And In A Top Portion Of Picket 75 Mm Long Bend To Be Required With 2 Nos 12 Mm Dia Hole For Fixing Support And Main Picket. Picketsshall Be Painted A Coat Of Red Oxide Primer Complete All As Specified As Per Is – 2721 – 2003.Make -Tata/ Sail/ Jindal/Apollo Steel/ Rinl/ Surya/ Prakash.For : Thalela , Ppgi (Green Colour) Sheet Of Size 3.05 X 1.0 M, 0.63 Mm Thick With Grade Of Zinc Coating 275 Gm/Sqm.For : Thalela - Ppgi (Green Colour) Sheet Of Size 3.05 X 1.0 M, 0.63 Mm Thick With Grade Of Zinc Coating 275 Gm/Sqm.Make : Sail/ Tata/ Jindalfor : Thalela , Ppgi Sheet Fence (Punched Tape Concertina Coil (Including Spike And Handle) With 50 Turns And Dia 1050 Mm)For : Thalela - Punched Tape Concertina Coil (Including Spike And Handle) With 50 Turns And Dia 1050 Mm, Having A Core Wire Of High Carbon Spring Steel Of High Tensile Strength. The Punched Tape And Core Wire Are Electro Galvanised To Provide Protection Against Out Door Exposure. The Punched Tape Ismechanjically Crimped Over The Core Wire And Then Formed Into A Coil At Various Parts Of The Periphery Of The Coil, Steel Clips Connect The Individual Width Of Barbed A 9 Mm And Spacing Of Clips 23.5Mm To 24.5Mm C/C. The Weight Of Each Coil Will Be 15.2 (+_5%) Kg Without Packing Material And Coil Length 15 Mtr When Opened Up. Each Coil Wound With Bituminised Hessian Cloth For Provideing Protecdtive Coasting As Per Specification No Ind/Eng/Prov/1245 Is For Raw Material And Drawing Imga -0112/B (Sheet 1 Of2), Imba-0112/C(Sheet 2 Of 2), Impd-1817/B, Impd-1820, Impd-1821/B And Impd-1822/Bfor : Thalela , Ppgi Sheet Fence (Barbed Wire 2.24Mm Dia, Length Of Minimum 450M Long In 50Kgs)For : Thalela - Barbed Wire 2.24Mm Dia, Length Of Minimum 450M Long In 50Kgs Per (@ 9 M Per Kg) Roll,Galvanized Barbed Wire Shall Be Of 2 Strands Conforming To Is 278-1978.It Shall Consist Of 2Line Wires Of2.24Mmdia With Dia Of Barbs 2Mm At 75Mm Centre To Centre.The Barbs Shallhave Alength Not Less Than 13 Mm And Not More Than 18 Mm With Sharp Pointededges.The Line And Point Wires Shall Be Circular In Section, Free From Scales And Otherdefects And Shall Be Uniformlygalvanized.The Line Wire Shall Not Containany Welds And Should Be Continuous.For : Thalela , Ppgi Sheet Fence (Punched Tape Low Carbon Gi Strip Having Sharp Barbs On Both Sides At Regular Specified Intervals.)For : Thalela - Punched Tape Low Carbon Gi Strip Having Sharp Barbs On Both Sides At Regular Specified Intervals. Fixing Three Rows For Supportconcertina Coil For 1St Layer Obstacle.The Punched Tape Ismechanically Crimped. The Weight Of Each Coil Will Be 2.6 (+_5%) Kg Without Packing Material And Punched Tape Length 50 Mtr When Opened Up. Each Gi Punched Tape Is Supplied In Plastic Spools With Packing Of 50 Mtrs Length.For : Thalela , Ppgi Sheet Fence (Self Tapping Screw 50 Mm)For : Thalela - Self Tapping Screw 50 Mm Long With Rubber Washer.For : Thalela , Ppgi Sheet Fence (Gi Binding Wire 0.9 Mm Dia)For : Thalela - Gi Binding Wire 0.9 Mm Diafor : Thalela , Ppgi Sheet Fence (Nut And Bolt 10 Mm Dia 50 Mm Long With Two Steel Washer)For : Thalela - Nut And Bolt 10 Mm Dia 50 Mm Long With Two Steel Washer.For : Thalela , Ppgi Sheet Fence(Syntheticenamel Paint, Of Black Colour Ist Quality)For : Thalela - Syntheticenamel Paint, Of Black Colour Ist Qualityconforming To Is 2932-2003. Make - Asian Paints (Apcolite Brand)/ Berger(Luxol Hi Gloss) / Goodlass Nerolac (Full Gloss)/ Shalimar (Superlac).For : Thalela , Ppgi Sheet Fence (Thinner)For : Thalela - Thinner. Make: J&N / Asian / Berger/ Nerolac.For : Thalela , Ppgi Sheet Fence ( Paint Brush 4)For : Thalela - Paint Brush 4. Make: Super Horse / Horse Gold / Horse 7 / Kirpal.For : Thalela , Ppgi Sheet Fence (Paint Brush 2)For : Thalela - Paint Brush 2. Make: Super Horse / Horse Gold / Horse 7 / Kirpal.For : Thalela , Ppgi Sheet Fence (Hdpe Sand Bag Khaki (Unroofed)For : Thalela - Hdpe Sand Bag Khaki (Unroofed) Item No W8/Wa-8015-000196 And Specification No Ind/Tc 2028. For : Thalela , Ppgi Sheet Fence (Angle Iron Picket 3300Mm(50 X 50 X 5Mm) Weight Approx 12.54 Kg)For : Uppergund - Angle Iron Picket 3300Mm(50 X 50 X 5Mm) Weight Approx 12.54 Kg As Per Is-808 : Re-Affirmed 1999 (Amdt –I) Includingwelding, Cutting, Drilling Hole, 150 Mm Long Angle Iron Same Sizes Should Bewelded At Bottom Of The Picket As A Fastening . Each Pickets Tobe Placed At A Distance Of 2.80 M Centre To Centre. Picket Shall Be Required 2 Nos Of 12 Mm Dia Hole Below 1.00 Mtr Top Of The Picket For Fixing Of Support Picket. Picketsshall Be Painted A Coat Of Red Oxide Primer Complete All Asper Drawing & Specified As Per Is – 2721 – 2003. Make -Tata/ Sail/ Jindal/Apollo Steel/ Rinl/ Surya/ Prakash.For : Uppergund , Ppgi Sheet Fence (Angle Iron Picket 2400 Mm Long (50X 50 X 5Mm) Weight Approx 9.12 Kg With Cutting05 Nos )For : Uppergund - Angle Iron Picket 2400 Mm Long (50X 50 X 5Mm) Weight Approx 9.12 Kg With Cutting05 Nos Notches For Fixing Of Barbed Wire As Per Is-808 : Re-Affirmed 1999 (Amdt –I) Includingwelding And Cutting Of Notches Etc Complete. Long Angle Iron Pickets Tobe Placed At A Distance Of 3.0 M Centre To Centre. Picketsshall Be Painted A Coat Of Red Oxide Primer Complete All Asper Drawing &Specified As Per Is – 2721 – 2003. Make -Tata/ Sail/ Jindal/Apollo Steel/ Rinl/ Surya/ Prakash.For : Uppergund , Ppgi Sheet Fence (Angle Iron Picket 1400 Mm Long (50X 50 X 5Mm) Weight Approx 5.32 Kg With Cutting03 Nos )For : Uppergund - Aangle Iron Picket 1400 Mm Long (50X 50 X 5Mm) Weight Approx 5.32 Kg With Cutting03 Nos Notches For Fixing Of Punch Tape As Per Is-808 : Re-Affirmed 1999 (Amdt –I) Includingwelding And Cutting Of Notches Etc Complete. Long Angle Iron Pickets Tobe Placed At A Distance Of 3.0 M Centre To Centre. Picketsshall Be Painted A Coat Of Red Oxide Primer Complete All As Specified As Perper Drawing & Specified As Per Is – 2721 – 2003. Make -Tata/ Sail/ Jindal/Apollo Steel/ Rinl/ Surya/ Prakash.For : Uppergund , Ppgi Sheet Fence (Angle Iron Picket 2950Mm Long(50 X 50 X 5Mm) Weight Approx 11.21 Kg )For : Uppergund - Angle Iron Picket 2950Mm Long(50 X 50 X 5Mm) Weight Approx 11.21 Kg As Per Is-808 : Re-Affirmed 1999 (Amdt –I) Includingwelding, Cutting Drilling Hole,150Mm Long Angle Iron Same Sizes Should Bewelded At Bottom Of The Picket As A Fastening.Angle Iron Pickets Tobe Placed At A Distance Of Every Third Picket Of The Fencing For Support And In A Top Portion Of Picket 75 Mm Long Bend To Be Required With 2 Nos 12 Mm Dia Hole For Fixing Support And Main Picket. Picketsshall Be Painted A Coat Of Red Oxide Primer Complete All As Specified As Per Is – 2721 – 2003.Make -Tata/ Sail/ Jindal/Apollo Steel/ Rinl/ Surya/ Prakash.For : Uppergund , Ppgi (Green Colour) Sheet Of Size 3.05 X 1.0 M, 0.63 Mm Thick With Grade Of Zinc Coating 275 Gm/Sqm.For : Uppergund - Ppgi (Green Colour) Sheet Of Size 3.05 X 1.0 M, 0.63 Mm Thick With Grade Of Zinc Coating 275 Gm/Sqm.Make : Sail/ Tata/ Jindalfor : Uppergund , Ppgi Sheet Fence (Punched Tape Concertina Coil (Including Spike And Handle) With 50 Turns And Dia 1050 Mm)For : Uppergund - Punched Tape Concertina Coil (Including Spike And Handle) With 50 Turns And Dia 1050 Mm, Having A Core Wire Of High Carbon Spring Steel Of High Tensile Strength. The Punched Tape And Core Wire Are Electro Galvanised To Provide Protection Against Out Door Exposure. The Punched Tape Ismechanjically Crimped Over The Core Wire And Then Formed Into A Coil At Various Parts Of The Periphery Of The Coil, Steel Clips Connect The Individual Width Of Barbed A 9 Mm And Spacing Of Clips 23.5Mm To 24.5Mm C/C. The Weight Of Each Coil Will Be 15.2 (+_5%) Kg Without Packing Material And Coil Length 15 Mtr When Opened Up. Each Coil Wound With Bituminised Hessian Cloth For Provideing Protecdtive Coasting As Per Specification No Ind/Eng/Prov/1245 Is For Raw Material And Drawing Imga -0112/B (Sheet 1 Of2), Imba-0112/C(Sheet 2 Of 2), Impd-1817/B, Impd-1820, Impd-1821/B And Impd-1822/Bfor : Uppergund , Ppgi Sheet Fence (Barbed Wire 2.24Mm Dia, Length Of Minimum 450M Long In 50Kgs)For : Uppergund - Barbed Wire 2.24Mm Dia, Length Of Minimum 450M Long In 50Kgs Per (@ 9 M Per Kg) Roll,Galvanized Barbed Wire Shall Be Of 2 Strands Conforming To Is 278-1978.It Shall Consist Of 2Line Wires Of2.24Mmdia With Dia Of Barbs 2Mm At 75Mm Centre To Centre.The Barbs Shallhave Alength Not Less Than 13 Mm And Not More Than 18 Mm With Sharp Pointededges.The Line And Point Wires Shall Be Circular In Section, Free From Scales And Otherdefects And Shall Be Uniformlygalvanized.The Line Wire Shall Not Containany Welds And Should Be Continuous.For : Uppergund , Ppgi Sheet Fence (Punched Tape Low Carbon Gi Strip Having Sharp Barbs On Both Sides At Regular Specified Intervals.)For : Uppergund - Punched Tape Low Carbon Gi Strip Having Sharp Barbs On Both Sides At Regular Specified Intervals. Fixing Three Rows For Supportconcertina Coil For 1St Layer Obstacle.The Punched Tape Ismechanically Crimped. The Weight Of Each Coil Will Be 2.6 (+_5%) Kg Without Packing Material And Punched Tape Length 50 Mtr When Opened Up. Each Gi Punched Tape Is Supplied In Plastic Spools With Packing Of 50 Mtrs Length.For : Uppergund , Ppgi Sheet Fence (Self Tapping Screw 50 Mm)For : Uppergund - Self Tapping Screw 50 Mm Long With Rubber Washer.For : Uppergund , Ppgi Sheet Fence (Gi Binding Wire 0.9 Mm Dia)For : Uppergund - Gi Binding Wire 0.9 Mm Diafor : Uppergund , Ppgi Sheet Fence (Nut And Bolt 10 Mm Dia 50 Mm Long With Two Steel Washer)For : Uppergund - Nut And Bolt 10 Mm Dia 50 Mm Long With Two Steel Washer.For : Uppergund , Ppgi Sheet Fence(Syntheticenamel Paint, Of Black Colour Ist Quality)For : Uppergund - Syntheticenamel Paint, Of Black Colour Ist Qualityconforming To Is 2932-2003. Make - Asian Paints (Apcolite Brand)/ Berger(Luxol Hi Gloss) / Goodlass Nerolac (Full Gloss)/ Shalimar (Superlac).For : Uppergund , Ppgi Sheet Fence (Thinner)For : Uppergund - Thinner. Make: J&N / Asian / Berger/ Nerolac.For : Uppergund , Ppgi Sheet Fence ( Paint Brush 4)For : Uppergund - Paint Brush 4. Make: Super Horse / Horse Gold / Horse 7 / Kirpal.For : Uppergund , Ppgi Sheet Fence (Paint Brush 2)For : Uppergund - Paint Brush 2. Make: Super Horse / Horse Gold / Horse 7 / Kirpal.For : Uppergund , Ppgi Sheet Fence (Hdpe Sand Bag Khaki (Unroofed)For : Uppergund - Hdpe Sand Bag Khaki (Unroofed) Item No W8/Wa-8015-000196 And Specification No Ind/Tc 2028. For : Uppergund , Ppgi Sheet Fence (Angle Iron Picket 3300Mm(50 X 50 X 5Mm) Weight Approx 12.54 Kg)For : Batote - Angle Iron Picket 3300Mm(50 X 50 X 5Mm) Weight Approx 12.54 Kg As Per Is-808 : Re-Affirmed 1999 (Amdt –I) Includingwelding, Cutting, Drilling Hole, 150 Mm Long Angle Iron Same Sizes Should Bewelded At Bottom Of The Picket As A Fastening . Each Pickets Tobe Placed At A Distance Of 2.80 M Centre To Centre. Picket Shall Be Required 2 Nos Of 12 Mm Dia Hole Below 1.00 Mtr Top Of The Picket For Fixing Of Support Picket. Picketsshall Be Painted A Coat Of Red Oxide Primer Complete All Asper Drawing & Specified As Per Is – 2721 – 2003. Make -Tata/ Sail/ Jindal/Apollo Steel/ Rinl/ Surya/ Prakash.For : Batote , Ppgi Sheet Fence (Angle Iron Picket 2400 Mm Long (50X 50 X 5Mm) Weight Approx 9.12 Kg With Cutting05 Nos )For : Batote - Angle Iron Picket 2400 Mm Long (50X 50 X 5Mm) Weight Approx 9.12 Kg With Cutting05 Nos Notches For Fixing Of Barbed Wire As Per Is-808 : Re-Affirmed 1999 (Amdt –I) Includingwelding And Cutting Of Notches Etc Complete. Long Angle Iron Pickets Tobe Placed At A Distance Of 3.0 M Centre To Centre. Picketsshall Be Painted A Coat Of Red Oxide Primer Complete All Asper Drawing &Specified As Per Is – 2721 – 2003. Make -Tata/ Sail/ Jindal/Apollo Steel/ Rinl/ Surya/ Prakash.For : Batote , Ppgi Sheet Fence (Angle Iron Picket 1400 Mm Long (50X 50 X 5Mm) Weight Approx 5.32 Kg With Cutting03 Nos )For : Batote - Angle Iron Picket 1400 Mm Long (50X 50 X 5Mm) Weight Approx 5.32 Kg With Cutting03 Nos Notches For Fixing Of Punch Tape As Per Is-808 : Re-Affirmed 1999 (Amdt –I) Includingwelding And Cutting Of Notches Etc Complete. Long Angle Iron Pickets Tobe Placed At A Distance Of 3.0 M Centre To Centre. Picketsshall Be Painted A Coat Of Red Oxide Primer Complete All As Specified As Perper Drawing & Specified As Per Is – 2721 – 2003. Make -Tata/ Sail/ Jindal/Apollo Steel/ Rinl/ Surya/ Prakash.For : Batote , Ppgi Sheet Fence (Angle Iron Picket 2950Mm Long(50 X 50 X 5Mm) Weight Approx 11.21 Kg )For : Batote - Angle Iron Picket 2950Mm Long(50 X 50 X 5Mm) Weight Approx 11.21 Kg As Per Is-808 : Re-Affirmed 1999 (Amdt –I) Includingwelding, Cutting Drilling Hole,150Mm Long Angle Iron Same Sizes Should Bewelded At Bottom Of The Picket As A Fastening.Angle Iron Pickets Tobe Placed At A Distance Of Every Third Picket Of The Fencing For Support And In A Top Portion Of Picket 75 Mm Long Bend To Be Required With 2 Nos 12 Mm Dia Hole For Fixing Support And Main Picket. Picketsshall Be Painted A Coat Of Red Oxide Primer Complete All As Specified As Per Is – 2721 – 2003.Make -Tata/ Sail/ Jindal/Apollo Steel/ Rinl/ Surya/ Prakash.For : Batote , Ppgi (Green Colour) Sheet Of Size 3.05 X 1.0 M, 0.63 Mm Thick With Grade Of Zinc Coating 275 Gm/Sqm.For : Batote - Ppgi (Green Colour) Sheet Of Size 3.05 X 1.0 M, 0.63 Mm Thick With Grade Of Zinc Coating 275 Gm/Sqm.Make : Sail/ Tata/ Jindalfor : Batote , Ppgi Sheet Fence (Punched Tape Concertina Coil (Including Spike And Handle) With 50 Turns And Dia 1050 Mm)For : Batote - Punched Tape Concertina Coil (Including Spike And Handle) With 50 Turns And Dia 1050 Mm, Having A Core Wire Of High Carbon Spring Steel Of High Tensile Strength. The Punched Tape And Core Wire Are Electro Galvanised To Provide Protection Against Out Door Exposure. The Punched Tape Ismechanjically Crimped Over The Core Wire And Then Formed Into A Coil At Various Parts Of The Periphery Of The Coil, Steel Clips Connect The Individual Width Of Barbed A 9 Mm And Spacing Of Clips 23.5Mm To 24.5Mm C/C. The Weight Of Each Coil Will Be 15.2 (+_5%) Kg Without Packing Material And Coil Length 15 Mtr When Opened Up. Each Coil Wound With Bituminised Hessian Cloth For Provideing Protecdtive Coasting As Per Specification No Ind/Eng/Prov/1245 Is For Raw Material And Drawing Imga -0112/B (Sheet 1 Of2), Imba-0112/C(Sheet 2 Of 2), Impd-1817/B, Impd-1820, Impd-1821/B And Impd-1822/Bfor : Batote , Ppgi Sheet Fence (Barbed Wire 2.24Mm Dia, Length Of Minimum 450M Long In 50Kgs)For : Batote - Barbed Wire 2.24Mm Dia, Length Of Minimum 450M Long In 50Kgs Per (@ 9 M Per Kg) Roll,Galvanized Barbed Wire Shall Be Of 2 Strands Conforming To Is 278-1978.It Shall Consist Of 2Line Wires Of2.24Mmdia With Dia Of Barbs 2Mm At 75Mm Centre To Centre.The Barbs Shallhave Alength Not Less Than 13 Mm And Not More Than 18 Mm With Sharp Pointededges.The Line And Point Wires Shall Be Circular In Section, Free From Scales And Otherdefects And Shall Be Uniformlygalvanized.The Line Wire Shall Not Containany Welds And Should Be Continuous.For : Batote , Ppgi Sheet Fence (Punched Tape Low Carbon Gi Strip Having Sharp Barbs On Both Sides At Regular Specified Intervals.)For : Batote - Punched Tape Low Carbon Gi Strip Having Sharp Barbs On Both Sides At Regular Specified Intervals. Fixing Three Rows For Supportconcertina Coil For 1St Layer Obstacle.The Punched Tape Ismechanically Crimped. The Weight Of Each Coil Will Be 2.6 (+_5%) Kg Without Packing Material And Punched Tape Length 50 Mtr When Opened Up. Each Gi Punched Tape Is Supplied In Plastic Spools With Packing Of 50 Mtrs Length.For : Batote , Ppgi Sheet Fence (Self Tapping Screw 50 Mm)For : Batote - Self Tapping Screw 50 Mm Long With Rubber Washer.For : Batote , Ppgi Sheet Fence (Gi Binding Wire 0.9 Mm Dia)For : Batote - Gi Binding Wire 0.9 Mm Diafor : Batote , Ppgi Sheet Fence (Nut And Bolt 10 Mm Dia 50 Mm Long With Two Steel Washer)For : Batote - Nut And Bolt 10 Mm Dia 50 Mm Long With Two Steel Washer.For : Batote , Ppgi Sheet Fence(Syntheticenamel Paint, Of Black Colour Ist Quality)For : Batote - Syntheticenamel Paint, Of Black Colour Ist Qualityconforming To Is 2932-2003. Make - Asian Paints (Apcolite Brand)/ Berger(Luxol Hi Gloss) / Goodlass Nerolac (Full Gloss)/ Shalimar (Superlac).For : Batote , Ppgi Sheet Fence (Thinner)For : Batote - Thinner. Make: J&N / Asian / Berger/ Nerolac.For : Batote , Ppgi Sheet Fence ( Paint Brush 4)For : Batote - Paint Brush 4. Make: Super Horse / Horse Gold / Horse 7 / Kirpal.For : Batote , Ppgi Sheet Fence (Paint Brush 2)For : Batote - Paint Brush 2. Make: Super Horse / Horse Gold / Horse 7 / Kirpal.For : Batote , Ppgi Sheet Fence (Hdpe Sand Bag Khaki (Unroofed)For : Batote - Hdpe Sand Bag Khaki (Unroofed) Item No W8/Wa-8015-000196 And Specification No Ind/Tc 2028. For : Batote Total Quantity : 1
