|
| 1 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : (The material shall be returned to Divisional Store under proper R.I) |
| 2 | 15 mm to 40 mm nominal bore. |
| 3 | Above 40 mm nominal bore |
| 4 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.salvaged |
| 5 | 25 mmdia. G.I. pipes |
| 6 | 40 mm diapipes |
| 7 | 50 mmdia. G.I. pipes |
| 8 | 100 mmdia. G.I. pipes |
| 9 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge. |
| 10 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil : |
| 11 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe).dia D.I pipe |
| 12 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes orDuctile Iron Pipes including testing of joints and including the cost of rubber gasket. |
| 13 | 200 mm dia |
| 14 | 150 mm dia |
| 15 | 100 mm dia |
| 16 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. |
| 17 | 80 mm dia. Gl pipe |
| 18 | 65 mm dia. Gl pipe |
| 19 | 50 mm dia. Gl pipe |
| 20 | 40 mm dia. Gl pipe |
| 21 | 25 mm dia. Gl pipe |
| 22 | 20 mm dia. Gl pipe |
| 23 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete: |
| 24 | 50 to 80 mm nominal bore |
| 25 | 25 to 40 mm nominal bore |
| 26 | Providing & fixing ofM.S Flanges 12mm thick including cost , nuts, bolts, washers and all sorts of carriages involved up to the site of work. Complete job.80 mm dia (at bends etc.) |
| 27 | Providing and fixing C.I. sluice valves (with cap) complete nuts, rubber insertions etc. (the tail pieces if required will be paid separately). |
| 28 | 200mm dia (Class I) |
| 29 | 150mm dia (Class I) |
| 30 | 100mm dia (Class I) |
| 31 | 65 mm dia (Class I) |
| 32 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately). |
| 33 | 50 mm dia. |
| 34 | 80 mm dia. |
| 35 | 100 mm dia. |
| 36 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):80mm nominal bore |
| 37 | Manufacturing/ fabrication and fixing of M.S surface box/chambers of size (0.60x0.60x0.75m) made out of 6mm thick MS sheet using 40x40x5mm angle iron for frame including cutting, hoisting and fixing in position incl. all locking arrangements, handles hinges etc and applying priming coat of approved steel primer. The job includes providing andlaying of cement concrete 1:2:4 on the base of frame to be embedded in, including all sorts of carriages involved for the completion of the job. The job is to carried out as per the directions of Site-incharge.complete job. |
| 38 | Providing of FHTCs to every unconnected household including cost of 15mm to 20mmdia G.I pipe for a length of 6 to 20 mtrs with G.I fittings /specials incl. laying & fitting of pipes ,earth work in excavation andrefilling.The job includes providing and fixing of Water Meters. complete job. |
| 39 | Supplying,Installation,Commissioning and Testing of Electromagnetic Flow Meters of ISI/ reputed Make (.The item includes fabrication of M.S tail pieces,flanges ,nuts bolts,R.I cloth etc, cutting of existing supply line,welding,wiring from panel board to site of installation complete as per requirement of site incl cost of RCC protective chamber of suitable size incl cost of M.S covers,ladders etc .complete job. |
| 40 | 200 mm dia |
| 41 | 150 mm dia |
| 42 | 100 mm dia |
| 43 | 80 mm dia |
| 44 | 65 mm dia |
| 45 | De-silting of SSFP\"s / PSTs /chambers by way of removing of silt & filter mediaby manual means using Rope and Bucket method. The job includes washing and cleaning of walls, dewatering including all leads and lifts , carriage of silt for its disposal within 50mtrs lead incl. cost of all T&P required for the completion of the job.complete job. |
| 46 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : |
| 47 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : |
| 48 | Providing & laying of stone soling hand packed in trenches.(Nallah) |
| 49 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 50 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1 36 |
| 51 | Providing and Laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 40mm nominal size). |
| 52 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 53 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 54 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 55 | Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 56 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 57 | Foundations, footings, bases of columns etc. for mass concrete. |
| 58 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc |
| 59 | Extra for shuttering in circular work (20% of respective centring and shuttering items)Foundation |
| 60 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 61 | Lintels, Beams, Plinth beams, Girders, Bressumers and Centilevers. |
| 62 | Suspended floors, roofs, landings, balconies and platform |
| 63 | Edges of slabs and breaks in floors and walls. Under 20cms wide |
| 64 | Stairs, (excluding landings) except spiralstaircases. |
| 65 | Arches, domes, vaults upto 6 m span |
| 66 | Extra for arches, domes, vaults exceeding 6 m span |
| 67 | Extra for additional height in centring, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors. roofs, landing, beams and balconies (Plan area to be measured). |
| 68 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 69 | 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 70 | 15mm Cement plaster finished with a floating coat of neat cement of mix: 1:4 (1 Cement : 4 fine sand) |
| 71 | 12mm Cement plaster cement of mix: 1:4 (1 Cement : 4 fine sand) |
| 72 | De-silting of SSFP\"s / PSTs /chambers by way of removing of silt & filter mediaby manual means using Rope and Bucket method. The job includes washing and cleaning of walls, dewatering including all leads and lifts , carriage of silt for its disposal within 50mtrs lead incl. cost of all T&P required for the completion of the job.complete job. |
| 73 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 74 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 75 | Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works. |
| 76 | Providing & fixing of ventillator/lighting arrangement on the top of dome of size(0.50x0.50 m) with 40x40x5mm angle iron base frame of 1m height fitted with 3mm mesh and fibre glass around the base incl. all ffittings and fixtures and all sorts of carriages involved for the completion of job.complete job. |
| 77 | Providing & fixing of main hole cover with iron base made up of angle iron (50x50x5mm) & lid of 40x40x5mm angle iron fitted with 6mm thick M.S plate .complete job. |
| 78 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 79 | Providing ridges or hips of width 60 cm overall width plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 |
| 80 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 81 | Brick work with common burnt clay F.P.S. (non-modular) bricks of class designated 75 in superstructure in Cement mortar 1:4 (1 Cement : 4 Fine sand). |
| 82 | Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) |
| 83 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class kail woo |
| 84 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately, all complete as per direction of engineer- in charge.First class Kail wood 35 mm |
| 85 | Providing and fixing 35 mm thick wire gauze shutters, using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws: ISI marked M.S. pressed bright finished butt hinges with necessary screws of required size.First class Kail-wood |
| 86 | Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with:4.0mm thick glass panes |
| 87 | Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS: 1328 (type 1), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with: Decorative veneer facings of approved manufacture |
| 88 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 89 | Providing/fixing of hingeshandles, haldarwazs, latches incl. screws of sorts all complete job. |
| 90 | ProvidingAluminium workin frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). First class kail wood. |
| 91 | ProvidingAluminium work Shuttersof doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). First class kail wood. |
| 92 | Providing and fixing glazing in aluminum door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasket etc.complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)22.3.1 With floating glass panes of 4.0 mm thickness (weight not lessthan 10.00 kg / sqm)22.3.2 With float glass panes of 5.0 mm thickness (weight not lessthan 12.50 kg / sqm) |
| 93 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm |
| 94 | Providing/Fabricating,, fixing of M.S fittings viz bends, Tees,nipples double collars, tail pieces of suitable degrees to be fabricated from 6mm/8mm thick M.S plate as per the requirement of site. This item also includes cost ofspun yarnwith insertion of spun yarn including welding charges,cutting,threading ends etc. The work should be leak proof . The job is to be paid in fitted and finished form and is to be carried out as per the directions of site in charge.complete job. |
| 95 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer\"s specification. |
| 96 | Providing /fixing of 150 mm dia MS Tail piece with paddle flange & end flange of length 1.20 metres (Subject to actual at site). |
| 97 | Providing /fixing of falnged jointedto 150 mm dia G I Ppipe incl all nuts, bolts washers etc.COMPLETE JOB |
| 98 | Providing /fixing of falnged jointedto 200 mm diaM.S pipe for inlet pipe incl all nuts, bolts washers etc.COMPLETE JOB |
| 99 | Providing /fixing of 65 mm dia thick constant bleed with requisite bends, ball valves, erecting with assembly complete job (Subject to actual at site). |
| 100 | Providing /fixing of 150 mm dia MS pipe flanges incl. requisite supporting from floculator to filter house channel (Subject to actual at site). |
| 101 | Providing, fixing, installation, sucessful commissioning of up rotating bridge moving with MS rail on center bearing incl. embedding in cement concrete and on the base of clarifloculator & fabricated with ISA-100x100x6mm channel with 50x50x6mm angle, suitable for bearing silt load incl. end carriage driver, fly wheel, chain reduction gear motor of required base frame with PGI cover for reduce gear & motor, MS wheel for bridge to facilitate incl. pinion bearing shaft, incl. 3 phase circuit assembly for rotation of floculator bridge, MS wheel and arrangement motors etc. of 1.5 HP moving arrangement crompton make reduction gear box frame stainless steel blades. the job also incl. connecting pole system & appropriate gauge PVC, copper wire & electric cables, all complete job. |
| 102 | Providing/Laying of filter media supported by requisite sizes of gravel incl. all carriages, head load & placing in position, all complete job. |
| 103 | Marble stone flooring with 16 mm (average) thick marble stone (sample of marble shall be approved by engineerin-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with cement slurry including rubbing and polishing complete with: pink plain marble. |
| 104 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades, except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 105 | Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 106 | Finishing walls with water proofing cement paint of required shade: New work (two or more coats) applied @3.84 kg/10 sqm. |
| 107 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer. |
| 108 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 109 | Providing/fixing of 80 mm dia PVC drainage system with specified perforation with requisite tees, plug caps, laying in position all complete job. |
| 110 | Providing/fixing/testing/commissioning of 1 HP motor reduction gear box vertical fledges, agitator, 40 mm dia line for above at bleaching chambers, GM values, PVC disphrase valves ridged PVC pipes M/S rubber lined above tank all complete job. |
| 111 | Providing/fixing/testing/commissioning of centrifugal pumping set with discharge along with all connecting accessories, 2 HP 3 phase electric motor 50 mm GI piping with specials GM foot valve, non return valve coupling level indicator for back wash tank incl requisite concrete base with nut bolts all complete job. |
| 112 | Providing/fixing/testing/commissioning of150 mm dia sluice valves incl. bends, tees, tail pieces all complete job. |
| 113 | Providing/fixing/testing/commissioning of air blower complete with all requisite accessories, concrete base, nuts, bolts, washers, 65 mm dia GI pipe with requisite valves with a standby unit all complete job. |
| 114 | Providing/fixing of extension rods for sluice valves incl. housing, fixing in concreteall complete job. |
| 115 | Providing/fixing/testing/commissioning of Rate of flow, MS surface floats, loss of head gauge, filter modules, MS surface floats, flow meters and glass tops for CWC. |
| 116 | Providing and installation of 19/18 PVC copper main cable connection from transformer to treatment plant of reputed make ISI as per the requirement of department. |
| 117 | Providing 3 phase c/c circuit connection for electric motors with insoluble cables capacity variying for 1 to 5 HP. |
| 118 | Providing Lighting points within the plant to be laid in suitable PVC conduits conforming to relevant IS specification. |
| 119 | Providing main control pannel board incl. cabling, light indicator, circuit monitoring, boxing, angle iron, embedding in walls, makin good the same as per engineer-in-charge. |
| 120 | Providing and installation of voltage stablizers of 20 KVA capacity conforming to relevant IS specification. |
| 121 | cost on account creationof 100kva sub station and 11kv feeder with 9.0m long SP-33 ST poles fitted with sole plates cross arma, insulatior, pins, link sets. Dropouts sets disc sets, lighting areestors concerte bottiming as site requirement. |
| 122 | cost on account of 50kva voltage corectionequipment. |
| 123 | cost on account of fire fighting eqipument shock proof matting and other electric item as preventive measures |
| 124 | cost on account of electrification of premisses and pump house by way of high mist lumumminaries incld. Cost MS tubuler poles and other allied asseceriores and conductors |
| 125 | cost on account of providing, fitting of automatic power factor correcton pannel with allied jobs. |
| 126 | cost on account of tools and tackles, shock resistant rubbar mats, anti skid rubber flooring, matting, bedding for operators etc |
| 127 | Carriage ofmaterial from different sources to site of work/dumping site by Mechanical Transport including loading, unloading, stacking etc: |
| 128 | Cement and steel from divl. Store for an avg lead of 09 km |
| 129 | Sand & Stone aggregate for an avg. lead of 45km |
| 130 | Soling 10km |
| 131 | Bricks 45km |
| 132 | 200 mm dia D.I PIPES 09KM |
| 133 | 150 mm dia D.I PIPES 09KM |
| 134 | 100 mm dia D.I PIPES 09KM |
| 135 | Below 100mm dia G.I pipes 09km |
| 136 | Extra Carriage of material fromdumping site to actualsite of work by manual means (Head load) for an avg lead of 200 mtrs. |
| 137 | cement |
| 138 | steel |
| 139 | Sand &Stone aggregates |
| 140 | Stone soling |
| 141 | Bricks |
| 142 | 200 mm dia D.I PIPES |
| 143 | 150 mm dia D.I PIPES |
| 144 | 100 mm dia D.I PIPES |
| 145 | Below 100mm dia G.I pipes 09km |
