Bids Are invited for SLEEVE,DIA101/86X119MM,DWN:PD/R-272134 - SLEEVE,DIA101/86X119MM,DWN:PD/R-272134FOR QUENCHER PUMP OF GCP #3 AS PER PD/R- DRAWING.DRAWING NO: PD/R-272134 , SLEEVE,SIZE:DIA240/200X274MM,PD/R-272135 - SLEEVE,SIZE:DIA240/200X274MM,PD/R-272135FOR TUNDISH TILTER OF CASTER #3 AS PER PD/R- DRAWING.DRAWING NO : PD/R-272135 , SHAFT,DWN:PD/R-221051,POS:1-5 - SHAFT WITH KEYS, CAP NUT AND NUT FOR PRIMARAYSCRUBBER PUMP(SHM 150 / 50 Q) AS PER PD/R-221051 PART NO. 1, 5 AND 7.KEY SIZE: 18 X 78 X 11 (ONE NO.)KEY SIZE: 16 X 82 X 10 (ONE NO.)LOCK WASHER : MB 13(ONE NO.)LOCK NUT : KM 13 (ONE NO.)MATERIAL AS PER DRAWINGS. , SLEEVE,SHAFT,DWN:PD/R-221051,POS:4 - SHAFT SLEEVE, FOR PRIMARY SCRUBBER PUMP(SHM 150 / 50 Q) AS PER PD/R-221051 PT NO.4.MAT: 04 Cr 19 Ni 9 , LOWER BEARING ASSY,DWN:PD/R-227588 - LOWER BEARING ASSY,DWN:PD/R-227588FOR HV SCREW CLASSIFIERDRAWING NO : PD/R-227588POSITION NO: 1-20 , SLEEVE F/COLD WELL PUMP,PH-26 - SLEEVE F/COLD WELL PUMP,PH-26MATERIAL: AS PER DRGDRAWING NO : PD/R-201540POSITION NO : 14 , TOP SLEEVE,IMPELLER,COLD WELL,P-201540R3 - SLEEVE,IMPELLER,DWN:PDR201540REV3,POS:13MANUFACTURER : KIRLOSKARTYPE/MODEL : BHR 3-30DEGDRAWING NO : PD/R-201540 R3POSITION NO: 13 , SHAFT,INTERMEDIATE,F/SETTLING TANK PUMP - SHAFT,INTERMEDIATE,F/SETTLING TANK PUMPMATERIAL: AS PER DRG.DRAWING NO : PD/R-201121 R1POSITION NO: 1 , HOUSING,THRUST BRG,DWN:PDR144641,POS:247 - HOUSING,THRUST BRG,DWN:PDR144641,POS:247WITHOUT BEARING FOR PUMPMANUFACTURER : KIRLOSKARTYPE/MODEL : BHR 3-30DEGDRAWING NO : PD/R-144641POSITION NO: 247 , TRANSMISSION BEARING,DWN:PD/R-228328 - TRANSMISSION BEARING,DWN:PD/R-228328FOR HOT WELL PUMP,PH- 18,MATERIAL: AS PER DRG. , BEARING,BOWL,F/COLD WELL PUMP,PH-26 - BEARING,BOWL,F/COLD WELL PUMP,PH-26MATERIAL: AS PER DRGDRAWING NO : PD/R- 228331 , BEARING,SUCTION BELL,DWN:PD/R-228333 - BEARING,SUCTION BELL,DWN:PD/R-228333FOR AUXILIARY PUMP,MATERIAL: AS PER DRG. , BEARING,BOWL,INTMD,F/ AUXILIARY PUMP - BEARING,BOWL,INTMD,F/ AUXILIARY PUMPMATERIAL:
