Miscellaneous Civil Work At Hrdc Dismantling Of False Celling (Only Board &Beading)Incl.Bringing Down Carefully And Disposal Of Unserviceable Materials With In 100Mlead Stripping Plaster W/Racking Dismantling Of Steel/Wooden Door/Window With Frames Including Bringing Down Carefully And Stacking. Dismantling Of Steel Structures Such As Colu-Mns,Roof Trusses,Including Removal Of Rivetsnuts,Bolts,Cleats,Etc.And Cutting Weldedjoints Etc.And Stacking Within A Lead Of30m. PROVIDING 2 CM THICK CEMENT PLASTER WITH CEMENT MORTAR OF PROPORTION 1:6 AS DIRECTED BY THE ENGINEER-IN-CHARGE.(RATE INCLUDES COST OF ALL MATERIALS, LABOURS, T&P,TAXES ETC ALL COMPLETE PROVIDING SAL WOOD FRAMES WROUGHT&PLAINEDAS SPECIFIED&FIXING IN DOOR, WINDOW FRAMES,TRUSSES ETC.INCLUDING COAL TARRING THE SURFACE IN CONTACT WITH MASONRY/CONCRETE. PROVIDING&FIXING SOLID CORE FLUSH DOOR BOTHSIDES COMMERCIAL VENNER HOT PRESSED BONDED WITH PHENOL FORMAL DEHYDE SYNTHETIC RESIN TERMITE PROOF SHUTTER 32MM THICK EXCLUDING FITTINGOF REGAL BRAND OR EQUIVALENT. PROVIDING AND FIXING MS HOLD FAST OF MINM.3MMTHICK TO DOOR AND WINDOW FRAMES(STEEL WILL BESUPPLIED BY THE CONTRACTOR AT HIS OWN COSTAND WILL NOT BE ISSUED ON RECOVERY RATE.) Labour,Service & Like Charges % : 30.00 PROVIDING AND FIXING BRASS ALDROPS 16X305MM SIZE INCLUDING BOLTS,NUTS AND NECESSARY SCREWS. PROVIDING AND FIXING BRASS HANDLES OF SIZE-6FOR DOORS. PROVIDING AND FIXING IRON BUTT HINGES 100 MMSIZE WITH NECESSARY SCREWS. PROVIDING AND FIXING OF FALSE CEILING MADEOF 12.5 MM THICK GYP BOARD OF PLAINDESIGN ALONG WITH COLD FORM GI CHANNELS OFIGL STANDARD MF-5,AT EVERY 305 MM APPROX.CENTRE TO CENTRE,F6(APERIMETER CHANNELHINGED BY MF-B CEILING ANGLES USING STANDARDNUTS,BOLTS,CLAMPS,D526&P534 MB CONNECTINGCLIP USING EXPANDABLE MS FASTNER AND DRY WALLSCREWS INCL.JOINTING MATERIALS COMPLETE ASPER DESIGN AND AS DIRECTED BY ENGG.-I/C. Providing and fixing with Anodised Aluminium window frame section 2 1/2 x1 1/2 (Heavy type of 1.5mm thick and around 0.786 KG/Rmt) including 5 to 6 mm thick plain glass with rubber lining and 1/2 x 1/2 Aluminium channel to be fitted on both side by steel screws, steel putty where ever necessary as directed by Engineer -in-charge. PROVIDING AND FIXING ALUMINIUM SLIDING WINDOWFRAME&SHUTTER MADE OF APPROVED STANDARD ANODISED ALUMINIUM SECTION(HEAVY TYPE OF 1.5MMTHICK)INCLUDING ANODISED ALUMINIUM GUIDE CHANNEL&6MM THICK PLAIN GLASS FOR SLIDING WINDOW SHUTTER BOTH WAY WITH ALL OTHER NECESSARYARRANGEMENTS LIKE SLIDING ROLLER,HANDLE,URUBBER AND T RUBBER LINER&SCREWS ETC.COMPLETE AS PER DIRECTION OF ENGINEER-IN-CHARGE. PROVIDING & LAYING OF VITRIFIED HIGH GLOSS TILE (TRADE MARK- MARBONITE, KAJARIA, SOMANY, JOHNSON OR EQUIVALENT , (SIZE 600X600MM) , 8 MM THICK INFLOORING SKIRTING, DADO CORRERS , ANGLES, BEADING ETC ON 12MM THICK CEMENT PLASTER 1:3 (1CEMENT : 3 SAND) JOINTED WITH WHITE/COLOURED CEMENT SLURRY/ PUTTY AS PER SPCIFICATION INCLUDING CHIPPING THE EXISTING SURFACE IF REQUIRED FOR PLASTERING , FINISHING COMPLETE PROVIDING AND FIXING SUN CONTROL POLYSTERFILM SUCH AS GAREWARE OR EQUIVALENT ON THEGLASS PANES OF DOOR,WINDOW,PARTITION INCL.CLEANING THE GLASS SURFACE AND COMPLETE THEWORK AS DIRECTED BY ENGINEER-IN-CHARGE. PROVIDING AND LAYING FLY ASH BRICKS IN CEMENT MORTAR OF PROPORTION (1:6) IN SUPERSTRUCTURE UP TO A HEIGHT OF 5M ABOVE GROUND LEVEL AND AS DIRECTED BY ENGINEER IN-CHARGE.(RATE INCLUDES COST OF ALL MATERIALS, LABOURS, T&P,TAXES ETC ALL COMPLETE)PROVIDING AND FINISHING CONCRETE,MASONRYSURFACE,HARD BOARD PARTITION,CEILING ETC WITHTWO COAT OF PLASTIC EMULSION PAINT OF J&N /BERGER/SHALIMAR/ASIAN/TRACTOR BRAND INCLUDINGALL BY WORKS LIKE SCRAPPING OF OLD PAINT,APPLY OF PLASTER OF PARIS WHERE EVER NECESSARY ASDIRECTED BY THE ENGINEER-IN-CHARGE. REMOVAL OF DAMAGED TARFELT,CLEANING THE SURFACE&DISPOSAL OF DEBRIS TO THE DUMPING YARDAS PER THE DIRECTION OF ENGINEER IN CHARGE. PROVIDING & LAYING APP ( ATACTIC POLYPROPYLENE POLYMER ) MODIFIED PRE-FABRICATED FIVE LAYER MINIMUM 3MM THICK WATER PROOFING MEMBRANE, MINERAL TOP FINISHED REINFORCED WITH NON- WOVEN POLYESTER MATT MANUFACTURED BY BITUMAT CO LTD/ SOPREMA/ GENERAL MEMBRANCES/ TAMKO/ SIKA INDIA PVT. LTD./HYDRO TECH. LTD./PIDILITE (DR. FIXIT)/PRODORITE LTD./BITUNIL/STP/APCON SHIELD CONSISTING OF A COAT OF BITUMEN PRIMER FOR BITUMEN MEMBRANE @ 0.40 LTR/SQ.MT. BY THE SAME MEMBRANE MANUFACTURE OF DENSITY AT 25 DEGREE C, 0.87 - 0.89 KG/LTR AND VISCOSITY 70 - 160 CPS OVER THE PRIME COAT THE LAYER OF MEMBRANE SHALL BE LAID USING BUTANE TORCH AND SEALING ALL JOINTS ETC., AND PREPARING THE SURFACE BY FILLING UNDULATIONS WITH CEMENT MORTAR(1:6) AND CURING THE SURFACE COMPLETE IN ALL RESPECT AND AS PER DIRECTION OF ENGG. IN CHARGE. THE VITAL PHYSICAL AND CHEMICAL PARAMETERS OF THE MEMBRANE SHALL PROVIDING 1.5 CM THICK CEMENT PLASTER WITH CEMENT MORTAR OF PROPORTION 1:6 AS DIRECTED BY THE ENGINEER-IN-CHARGE(RATE INCLUDES COST OF ALL MATERIALS, LABOURS, T&P,TAXES ETC ALL COMPLETE) PROVIDING & PAINTING ONE PRIMING COAT OF J & N / BERGER / SHALIMAR / ASIAN BRAND INCLUDING ALL NECESSARY BY WORKS BEFORE PAINTING FINISHING COAT SUCH AS DISTEMPERING/P.E.PAINTING/ENAMEL PAINTING ETC CLEANING,SCRAPING,PROVIDING&APPLYING ONECOAT OF ACRYLIC WALL PUTTY(NCP SUPER FINEONEXTERIOR PLASTER SURFACE&MAKING THE SURFACESMOOTH BY EMMERY PAPER PRIOR TO APPLY OF FINISH COAT OF PAINTING&AS DIRECTED BY THE ENGINEER-IN-CHARGE. PROVIDING AND DISTEMPERING WITH OIL BOUND WASHABLE DISTEMPER (BRAND JHONSON & NICOLSON/TRA CTOR/ASIAN/BERGER/SHALIMAR) TWO COATS TO GIVE AN EVEN SHADE ON OLD/NEW WORK INCL. ALL NECESSARY BY WORKS LIKE SCRAPPING OF OLD PAINT / DISTEMPER, APPLY OF PLASTER OF PARIS WHEREVER CLEANING,SCRAPING,REMOVING,RUST,DUST,GREASE,CHEMICAL ETC.FROM THE SURFACE OF STEEL STRUCTURAL,GC SHEETING,WALLING,EQUIPMENTS,CONCRETEPLASTER,WOODEN SURFACE ETC.AT DIFFERENTLOCATIONS,HEIGHTS AND PROVIDING AND PAINTINGTHE SAID SURFACE WITH TWO COAT OF SYNTHETICENAMEL PAINT OF J&N/BERGER/SHALLMAR/ASIANBRAND AS PER DIRECTION OF THE ENGINEER-IN-CHARGE. Providing & fixing 10 lit or low level PVC cistern of Cera/ Nyser/Somani/Parryware or equivalent make with approval of Engg_in- Charge with manually controlled device (handle lever) conforming to IS :7231 ISI mark wih all fitting and fixture complete icluding cutting & making good the walls & floor wherever rquired. PROVIDING AND FIXING 15X450 MM WHITE PVC CONNECTION (WIRE REINFORCED) WITH BRASS UNION FOR FIXING TO CISTERN, WASH BASIN, SINK ETC. PROVIDING AND FIXING TISSUE PAPER HOLDER(1151 NJAGUAR OR EQUIVALENT INCLUDING ALLFITTING COMPLETE. PROVIDING AND FIXING LIQUID SOAP HOLDER SOAPDISH (1131 NJAGUAR OR EQUIVALENT. Providing and fixing 600x20 mm CP brass towel rail of approved quality and brand with CP brass brackets fixed to wooden cleats with CP brass screws
