Bids Are Invited For Thebasic Electronics Trainers Should Consist Of The Following Analog Circuits Training System With Spice Simulation Software - Analog Circuits Training System Withspice Simulationsoftware Consisting Of A.Discrete Component Trainer- 05-Bihar

Bids Are Invited For Thebasic Electronics Trainers Should Consist Of The Following Analog Circuits Training System With Spice Simulation Software - Analog Circuits Training System Withspice Simulationsoftware Consisting Of A.Discrete Component Trainer- 05 Nosb.Transistor Application Trainer – 05 Nosc.Op-Amp Trainer – 05 Nosd.Op-Amp Application Trainer – 02 Nose.Analog, Digital And Mixed Signal Electronic Circuit Simulation Software – 10 User ( Please Refer The Technical Specification Documents ) , 3 ¾ Digit Digital Multimeter - It Should Be Used To Measure Voltage Current, Resistance, Capacitance, Frequency, Temperature, Diode And Continuity.• Data Holding• Range Selection Automatic And Manual• Full Function Protection• Large Lcd& High Resolution• Transistor Test• Low Battery Indication & Auto Power Off• Full Overload Protection & Shock Proof Protectionbasic Function • Dcv Range: Accuracy : ± ( 0.5%+4 ) 400Mv To 1000V• Acv Range: Accuracy : ± ( 0.8%+10 ) 400Mv To 750V• Dca Range: Accuracy : ± ( 1.0%+10 ) 400Μa To 10A• Aca Range : Accuracy : ± ( 1.5%+10 ) 400Μa To 10A• Resistance Range: Accuracy : ± ( 0.8%+4 ) 400? To 40M?• Capacitance Range: Accuracy : ± ( 2.5%+20 ) 4Nf To 200Μf• Frequency Range: Accuracy : ± ( 0.5%+10 ) 100Hz To 30Mhzratings:• Celsius : ± ( 1.0%+5 ) -40°C To 1000°C• Function Protection1% To 99%• Input Impedance :10Mo• Sampling Rate :3Times / S• Ac Frequency Response• Operation Way :Auto Range 40Hz To 400 Hz• Max. Display :3999 • Lcd Size:70X50mm• Battery:3V ( 1.5Vx2 ) Aaa Size , Dual Channel, 0-30V / 3A Variable, 5V Fixed Power Supply - Dual Channel, 0-30V / 3A Variable, 5V Fixed Power Supply• Input Voltage :220 Vac / 50Hz• Two Adjustable Output • Output Voltage :0-30V ( Adjustable Continuously ) • Output Current: 0-3A ( Adjustable Continuously ) • Source Regulation: Cv = 0.01% + 3Mv Cc = 0.01% + 6Ma• Load Regulation: Cv = 0.01% + 2Mv ( Rated =3A ) Cv = 0.01% + 5Ma ( Rated >3A ) Cc = 0.01% + 6Ma• Ripple And Noise: Cv = 1Mv ( Rms ) Cv = 20M Vp-Pcc = 3Ma ( Rms ) Cc = 50Map-P• Protection : Current - Limiting Protection• Indication: Voltmeter And Ammetero Volt - Indication ( Led ) : ± 1% ± 2 Digito Amp - Indication ( Led ) : ± 2% ± 2 Digitfixed Output• Output Voltage:5V±3%• Output Current:3A• Source Regulation : 1X10-4 +1Mv• Load Regulation :1X10-3 • Ripple And Noise :0.5Mv ( Rms ) • Protection : Current - Limiting And Short - Circuit Protection• Operating Temp : 0 To 400 Crelative Humanity :< 90% , 25Mhz Dual Channel Dds Function Generator - Dual Channel 25 Mhz Function Generatorshould Use Dds Technologyno Of Channels: 2Vertical Resolution: 14 Bitssampling Rate :125 Ms / S Frequency Range Of Waveform ?Sine Wave : 1Μhz ~ 25Mhz?Square Wave: 1Μhz ~ 5Mhz?Sawtooth Wave : 1Mhz ~ 1Mhz?Pulse Wave: 500Μhz ~ 5Mhz?Arbitrary Wave : 1Mhz ~ 5Mhzdisplay :4.3” Tft, Lcd Modulation: Am / Fm, Ask, Fsk, Psk, Burst , 100 Mhz Dual Channel Digital Storage Oscilloscope - Bandwidth : 100Mhzno. Of Channel : 2 Chsampling Rate: 1 Gs / S Per Chrecord Length: 1 Mpoints Per Chautomatic Measurementsshould Support Min 20 Different Measurement & 6 Measurement On Display.3 Digit Dmm ( Ac, Dc, Ac+Dc ) 6 Digit Frequency Countermaths: Addition, Subtraction, Multiplication, Division, Fftbuilt In Function Generator: 0.1Hz To 50Khz Sine Wave , 60Mv To 6Vp-P Amplitudedisplay: 6.5 Color Displayinterface: Usb, Lanprobe & Stabdard Accessories 300Mhz Passive Switchable Probe 1X-10X Per Ch, Power Cord, Bnc To Banan Adapter, Instruction & Started Manualemc :Should Comply: Rf Emission: In Line With Cispr 11 / En 55011 Group 1Class A ; En 55011, En 61326-1 And En 61326-2-1 Class A, Immunity:In Line With Iec / En 61326-1 Table 2, Certifications: Vde, Csa Total Quantity : 1

Refer document

INR 4500.0 /-

INR 9 Lakhs /-