Bids Are invited for KEY,R#0,DWN:PD/R-201693,POS:4 - KEY,R#0,DWN:PD/R-201693,POS:4FOR R#0 WORK ROLL ASSEMBLY.DRAWING NO: PD/R-201693POSITION NO : 4 , KEY,R#0,DWN:PD/R-201691,POS:4 - KEY,R#0,DWN:PD/R-201691,POS:4FOR R#0 WORK ROLL ASSEMBLY.DRAWING NO: PD/R-201691POSITION NO : 4 , MODIFIED LOCKING PIN,F/RI/II,PD/R-350792 - MODIFIED LOCKING PIN,F/RI/II,PD/R-350792FOR HSM RI/II TIE ROD ASSEMBLY.**ONE NO. M36X4 HEXAGONAL NUT (AS PER DIN:555) IS TO BE SUPPLIED ALONG WITH THE LOCKING PIN.DRAWING NO : PD/R-350792 , BAR,SUPPORT,DWN:CDB/R-26325 R1,POS:17 - BAR,SUPPORT,DWN:CDB/R-26325 R1,POS:17TOP PRESSURE PLATE FOR BREAKER BLOCK ASSEMBLY OF HSM ROUGHING BUILD UPDRAWING NO : CDB/R-26325 R1POSITION NO: 17 , PIN,DOWEL,DWN:CDB/R-26325 R1,POS:18 - PIN,DOWEL,DWN:CDB/R-26325 R1,POS:18FOR ROUGH BUILD UPDRAWING NO : CDB/R-26325 R1POSITION NO: 18 , PIN,LOCATING,DWN:PD/R-203759 R1,POS:4 - PIN,LOCATING,DWN:PD/R-203759 R1,POS:4FOR FINISHING MILL BACK UP CHOCKDRAWING NO : PD/R-203759 R1POSITION NO: 4 , SEAL COVER RING,DWN:CDB/R-26254,POS:7 - SEAL COVER RING,DWN:CDB/R-26254,POS:7FOR F2-F6 W/ROLL ASSEMBLY OF HSMDRAWING NO : CDB/R-26254POSITION NO: 7 , NUT,THREADED,DWN:PD/R-221279 R1,POS:3 - NUT,THREADED,DWN:PD/R-221279 R1,POS:3FOR FINISHING MILL BACK UP CHOCK ASSEMBLY,HSMDRAWING NO : PD/R-221279 R1POSITION NO: 3 , PIN,PULL OUT FRAME,DWN:PD/R-203770,POS:2 - PIN,PULL OUT FRAME,DWN:PD/R-203770,POS:2FOR FINISHING MILL WORK ROLL ASSEMBLYDRAWING NO : PD/R-203770POSITION NO: 2 , RING,THRUST,DWN:PD/R-201690,POS:2 - RING,THRUST,DWN:PD/R-201690,POS:2FOR ROUGHING ROLL CHOCK ASSEMBLYDRAWING NO : PD/R-201690ANY OTHER REFERENCE: 106.2-13-31-M-510-0583-0POSITION NO: 2 , Retainer key,TS - KEY,50.4/35X19MM,DWN:PD/R-188400,POS:1FOR FINISHING MILL BACK UP CHOCK ASSEMBLYDRAWING NO : PD/R-188400POSITION NO: 1 , Eye screw - SCREWTYPE : EYEMATERIAL : CARBON STEELSIZE X PITCH : M24LENGTH : 150/100MMDRAWING NO : PD/R-188611 , Yoke assly,NTS Hood - YOKE ASSY,DWN:PD/R-123979,POS:2,5,6,7FOR HOOD FIXING OF FINISHING MILL
