}

Provision Of Sitting Area With Plywood For Lab No305 And 308 Sps Niser Jatani - Proving And Fixing Ii Position Office T&1E / Front Desk With &Awer, Rack As Per The Drawngs Having Compatmerts With Vertic Partitions Spacng Between 0 .6Om To 1 85M E, NISER JATNI-Odisha

National Institute Of Science Education And Research has published Provision Of Sitting Area With Plywood For Lab No305 And 308 Sps Niser Jatani - Proving And Fixing Ii Position Office T&1E / Front Desk With &Awer, Rack As Per The Drawngs Having Compatmerts With Vertic Partitions Spacng Between 0 .6Om To 1 85M E. Submission Date for this Tender is 01-11-2021. Wood Supply Tenders in NISER JATNI Odisha. Bidders can get complete Tender details and download the document.




Tender Notice

29655421
Corrigendum : Provision Of Sitting Area With Plywood For Lab No305 And 308 Sps Niser Jatani - Proving And Fixing Ii Position Office T&1E / Front Desk With &Awer, Rack As Per The Drawngs Having Compatmerts With Vertic Partitions Spacng Between 0 .6Om To 1 85M E
Indian
Odisha
Niser Jatni
01-11-2021

Tender Details

Provision Of Sitting Area With Plywood For Lab No305 And 308 Sps Niser Jatani - Proving And Fixing Ii Position Office T&1E / Front Desk With &Awer, Rack As Per The Drawngs Having Compatmerts With Vertic Partitions Spacng Between 0 .6Om To 1 85M End Horizontal Compartments Spacing Between 040M To 0.7On With Intermediate Vertical End Horizortnl Partitions Made Up Of 2Snn Flck S / ’R Grade Soid Ply With 1 .0 Umm Thick Lamnation ( White / Off Whde ) For Inside Area Mnd 1.5 Mm Thick Lwwiates Of Approved Colour And Shade On Outside Surf Ace With A Depth From 0.55M Up To 0.75 M And Bottom, Top, Outer Sides And Back Side Menters Made Up Of 1 Mr Thick 5Nr Grade Ply With 1.0 Mrn Thick Lamination Of Approved Coloix And Shade On One Side And Front Shutters Made Uç Of 25Mm Thick Sm’ Grade Block Board Wtth 1 .50 Rmrm Flick Lamination Of Approved Colous Sxl Shade On Both Skies With Heavy &Ay Magnetic Catcher, Lock ( Go*Ei Or Equvalert Make Wtth Mlnirmnm Tine Keys ) And Handle Of Size Of 1So Mm, Tower Bait Of The Size Of 1 Sgmmn At Top And Bottom N One Shutter, Brass Hinges With Ss Finish Or Good Qualtty Pure Ss Lwiges Of 304 Wade Of Size Of 150 Nmn And Providing Teak Wood Beadnigs Of Suttable Wdh Al Round The Shutters, Hinges ‘Ooves, Shelves, Outer Frame, Vertical Mnd Horizontal Frame It&Iding Polist*Ig The Teakwood Beading And Proviiig And Fixrig Sal Wood Plaits Of Size 2Smxsgnm Below The Horizontal Ply Boards Along Each Su4iportng Edges Wtth Pobshing, Lnclu&Ig The Cost Of Fevicol, Nails, Screws, Tools, Plants, Mdterials And Lnbour Chwrges Etc Complete As Per Specification, Drawings And As Nstructed By Engneer- In-Chwge At The Bottom There Will Be Under Yer Of Wpc Of Minimum 25 Mmn Height. The Ply Wood Of

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 29-10-2021 Drawing Other 01-11-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 8444.0 /-
Tender Value
INR 4.22 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail