Repairs To Wooden And Steel Furniture For Solan Under Ge Kasauli-3 Almirah Large With Shelf 4 Almirah Mediumwith Shelf 5 Bed Hard With Ply Top 6 Book Case Small 7 Bin Soiled Linen 8 Chair Dining 9 Chair Writing 10 Chair Easy 11 Chair Cba , SOLAN-Himachal Pradesh

Repairs To Wooden And Steel Furniture For Solan Under Ge Kasauli-3 Almirah Large With Shelf 4 Almirah Mediumwith Shelf 5 Bed Hard With Ply Top 6 Book Case Small 7 Bin Soiled Linen 8 Chair Dining 9 Chair Writing 10 Chair Easy 11 Chair Cba 12 Chair Wooden Bottom 13 Sofa Set 5 Seater 14 Locker Bed Side ( Internal & External ) 15 Table Peg 16 Teapoy 17 Table Bed Side 18 Table Office Officer Wooden 19 Table Office Clkwooden 20 Table Writing 21 Table Centre 22 Table Dining 8 Pers 23 Table 3X2 With Drawer 24 Table 3X2 Without Drawer 25 Side Board 26 Painting To Steel Furniture ( Internally & Externally ) :- 27 M&L For Preparation Of Old Painting Surfaces Of Any Description Width Or Girth Including Cleaning / Scraping Old Painted Surfaces With Blow Lamp Etc Denting & Filling The Depression With Putty And Rubbing The Surface There After Andpainting With One Coat Of Synthetic Enamel Paint By Spray Machine To Steel Items Complete And Colour / Shade As Directed By Engr-In-Charge And As Required. 28 Internally & Externally 29 Almirah Large Steel With Shelves 30 Almirahmedium Steel With Shelves 31 Locker Bed Side Steel 32 Table Office Clk Steel 33 Externally 34 Chair Cb Steel With Arms 35 Chair Verandah 36 Teapoy Verandah 37 Book Shelf Open Large Steel 38 Replacement Of Cushion For Sofa Set 4 / 5 Seater 39 M&Lin Replacement Of Foam Cushion Size 560X530x100mm, 40 Density. Duly Coveredall Over With Tapestry Cloth Superior Qualitynot Less Than Rs 350 / - Per R / M As Approved.A Suitable Chain With Hook And Runner Of Approved Quality One Side Of The Cushion Will Be Provided Of The Required Length As Directed By Engineer-In Charge. 40 Repair To Chair Easy : S & F Of Following Components Of Chair Easy Made Out Of Well Seasoned Sheesham Wood All As Per Drg After Removing The Old One.Drgno. Fd-17 ( M ) , 229 ( M ) 41 Front Leg 42 Rear Leg 43 Side Rail Duly Holed ( Distance Of 12.5 Mm From One Hole To Another ) 44 Front Rail Duly Holed ( Distance Of 12.5 Mm From One Hole To Another ) 45 Back Rail Duly Holed ( Distance Of 12.5 Mm From One Hole To Another ) 46 Front Support Rail 47 Back Support Rail 48 Arms 49 Preparation Of Surface By Removing Of Existing Polishing Mark Scratches From All Exposed Wooden Surface To Make Clean And Smooth With Required Grade Of Sand Paper And Finish With Polish To Bring The Surface To Require Glossy Finish And As Directed By Engr-In-Charge. 50 Repair To Chair Writing : S&F Of Following Components Of Chair Writing Made Out Of Well Seasoned Sheesham Wood All As Per Drg After Removing The Old One. Drgno. Fd-280 51 Front Leg 52 Rear Leg 53 Side Rail Duly Holed ( Distance Of 12.5 Mm From One Hole To Another ) 54 Front Rail Duly Holed ( Distance Of 12.5 Mm From One Hole To Another ) 55 Back Rail Duly Holed ( Distance Of 12.5 Mm From One Hole To Another ) 56 Long Stiffner 57 Back Support Rail 58 Arms 59 Preparation Of Surface By Removing Of Existing Polishing Mark Scratches From All Exposed Wooden Surface To Make Clean And Smooth With Required Grade Of Sand Paper And Finish With Polish To Bring The Surface To Require Glossy Finish And As Directed By Engr-In-Charge. 60 Repair To Chair Dining : S&F Of Following Components Of Chair Diningmade Out Of Well Seasoned Sheesham Wood All As Per Drg After Removing The Old One. Drgno. Fd-228 / 279 61 Front Leg 62 Rear Leg 63 Side Rail Duly Holed ( Distance Of 12.5 Mm From One Hole To Another ) 64 Front Rail Duly Holed ( Distance Of 12.5 Mm From One Hole To Another ) 65 Back Rail Duly Holed ( Distance Of 12.5 Mm From One Hole To Another ) 66 Long Stiffner 67 Back Support Rail 68 Preparation Of Surface By Removing Of Existing Polishing Mark Scratches From All Exposed Wooden Surface To Make Clean And Smooth With Required Grade Of Sand Paper And Finish With Polish To Bring The Surface To Require Glossy Finish And As Directed By Engr-In-Charge. 69 M&L For Re-Canning To All Types Of Chairs, Chair Dinning, Writing, Easy, Cba, Cbb, Easy Nf, Stool Dressing And Bin Soiled Etc With Cane Plastic 2Mm Wide Half Round With Border Of 3Mm Wide In White Colour As Approved In True Godrej Pattern As Shown In Drg After Removing The Old One. 70 Repair To Peg Table. Drgno. Fd-277 71 Removing The Unserviceable Leg And Providng The New Leg Made Out Of 1St Class Sheesham Wood Seasoned Of Size 30X50x362mm High And Fixing The Same In Its Original Position As Per Drg. 72 Removing The Old Broken Top Rail And Providing The New Top Rail Made Out Of 1St Class Hardwood Sheesham Of Size 20X40x380mm And Fixing The Same In Its Original Position As Per Drg. 73 S&F In Replacement Of Table Top For Peg Tableafter Removingthe Old Unserviceable Top Made Out Of 19Mm Thick Pre-Laminated Particle Board One Side Sheesham Faced And Other Side White Balancing Confirming To Is-3097Including Sheesham Wood Beeding 6Mm Thick Fitted All Around Duly French Polished As Shown In Drg And As Directed By Engineer -In-Charge. 74 Preparation Of Surface By Removing Of Existing Polishing Mark Scratches From All Exposed Wooden Surface To Make Clean And Smooth With Required Grade Of Sand Paper And Finish With Polish To Bring The Surface To Require Glossy Finish And As Directed By Engr-In-Charge. 75 Repair To Table Centre. Drgno. Fd-274 76 Removing Unseviceable Leg And Providing New Leg Made Out Of 1St Class Hardwood Sheesham Of Size 60X30x356 Mm And Fixing The Same In Its Original Position As Per Drg. 77 Removing Old Broken Top Rail And Providing The New Top Rail Made Out Of 1St Class Hardwood Sheesham Of Size20x50x900mm And Fixing The Same In Its Original Position As Per Drg. 78 S&Fin Replacement Of Table Top For Table Centre After Removingthe Old Unserviceable Top Made Out Of 19Mm Thick Pre-Laminated Particle Board One Side Sheesham Faced And Other Side White Balancing Confirming To Is-3097Including Sheesham Wood Beeding 6Mm Thick Fitted All Around Duly French Polished As Shown In Drg And As Directed By Engineer -In-Charge. 79 Preparation Of Surface By Removing Of Existing Polishing Mark Scratches From All Exposed Wooden Surface To Make Clean And Smooth With Required Grade Of Sand Paper And Finish With Polish To Bring The Surface To Require Glossy Finish And As Directed By Engr-In-Charge. 80 Repair To Table Dining 6 Person. Drgno. Fd-230 81 Removing Unserviceable Leg And Providing New Leg Of Size 75X40x722mm High And Shape Made Out Of 1St Class Well Seasoned Hardwood Sheesham And Fixing The Same In Its Original Position As Per Drg. 82 Removing The Unserviceable Top Rail Long And Providing The New Top Rail Of Size 25X100x1500mm And Shape Made Out Of 1St Class Hardwood Well Seasoned Sheesham And Fixing The Same In Its Original Position As Per Drg. 83 Removing Old Broken Top Rail Short And Providing The New Top Rail Made Out Of 1St Class Hardwood Sheesham And Fixing The Same In Its Original Position As Per Drg. 84 S&Fin Replacement Of Table Top For Table Dining Six Person After Removingthe Old Unsv Top Made Out Of 19Mm Thick Pre-Laminated Particle Board One Side Sheesham Faced And Other Side White Balancing Confirming To Is-3097Including Sheesham Wood Beeding 6Mm Thick Fitted All Around Duly French Polished As Shown In Drg And As Directed By Engineer -In-Charge. 85 Preparation Of Surface By Remove Of Existing Polishing Mark Scratches From All Exposed Wooden Surface To Make Clean And Smooth With Required Grade Of Sand Paper And Finish With Polish To Bring The Surface To Require Glossy Finish And As Directed By Engr-In-Charge. 86 Repair To Table Dining 8 Person. Drgno. Fd-230 87 Removing Unserviceable Leg And Providing New Leg Of Size 75X40x722mm High And Shape Made Out Of 1St Class Well Seasoned Hardwood Sheesham And Fixing The Same In Its Original Position As Per Drg. 88 Removing The Unserviceable Top Rail Long And Providing The New Top Rail Of Size 25X100x1500mm And Shape Made Out Of 1St Class Hardwood Well Seasoned Sheesham And Fixing The Same In Its Original Position As Per Drg. 89 Removing Old Broken Top Rail And Providing The New Top Rail Made Out Of 1St Class Hardwood Sheesham Of Size 1500X900mm And Fixing The Same In Its Original Position As Per Drg. 90 S&Fin Replacement Of Table Top For Table Dining Eight Person After Removingthe Old Unsv Top Made Out Of 19Mm Thick Pre-Laminated Particle Board One Side Sheesham Faced And Other Side White Balancing Confirming To Is-3097Including Sheesham Wood Beeding 6Mm Thick Fitted All Around Duly French Polished As Shown In Drg And As Directed By Engineer -In-Charge. 91 Preparation Of Surface By Remove Of Existing Polishing Mark Scratches From All Exposed Wooden Surface To Make Clean And Smooth With Required Grade Of Sand Paper And Finish With Polish To Bring The Surface To Require Glossy Finish And As Directed By Engr-In-Charge. 92 Repair To Table 3X2 With Drawer. Drgno. Fd-284 / 1008 93 Removing Unserviceable Leg And Providing New Leg Made Out Of 1St Class Well Seasoned Hardwood Sheesham And Fixing The Same In Its Original Position As Per Drg. 94 Removing The Unserviceable Top Rail Long And Providing The New Top Rail Made Out Of 1St Class Hardwood Well Seasoned Sheesham And Fixing The Same In Its Original Position As Per Drg. 95 Removing Old Broken Top Rail Short And Providing The New Top Rail Made Out Of 1St Class Hardwood Sheesham And Fixing The Same In Its Original Position As Per Drg. 96 S&F In Replacement Of Table Top Fortable 3 X 2 With Drawer After Removingthe Old Unsv Top Made Out Of 19Mm Thick Pre-Laminated Particle Board One Side Sheesham Faced And Other Side White Balancing Confirming To Is-3097Including Sheesham Wood Beeding 6Mm Thick Fitted All Around Duly French Polished As Shown In Drg And As Directed By Engineer -In-Charge. 97 Preparation Of Surface By Remove Of Existing Polishing Mark Scratches From All Exposed Wooden Surface To Make Clean And Smooth With Required Grade Of Sand Paper And Finish With Polish To Bring The Surface To Require Glossy Finish And As Directed By Engr-In-Charge. 98 Repair To Bed Hard With Ply Top : Dismantling Of Old Unserviceable Components And S & F Of New Components Made Out Ofwell Seasoned Sheesham Wood Properly Planed All As Shown In Drg :- Fd-245 / 246 99 S & F Long Rail Size 1980X100x40mm 100 S & F Short Rail Size 840X100x40mm 101 S & F Stiffner To Support Ply Top Of Size 835X50x40mm 102 S&F Of Head Side Board Of Bed Newar / Bed Ply Top Duly Fixed With Legs Of Shisham Wood Including Dismantling Ofunsv Compoment All As Specified And Shown On Drg. Fd-245 / 246 103 S&F Of Foot Side Board Of Bed Newar / Bed Ply Top Duly Fixed With Legs Of Shisham Wood Including Dismantling Ofunsv Compoment All As Specified And Shown On Drg. Fd-245 / 247 104 S&F Of 3Mm Thick Sheesham Face Ply Wood Bwr Gde With Head Less Nailsto Both Sides To The Following Including Sheesham Wood Beading 6Mm Thick All Around After Taking Out Old One. 105 ( I ) Head Board Size 900X442mm 106 ( Ii ) Foot Board Size 900X230mm 107 S&F Ply Wood Of Size 1830X865x12mm In One Piecebwpisi Marked To Bed Hard Fixing With 30Mm Screw Wood Steel As Shown On Drg. 108 S&Fms Flat Ironclamp Size 200X35x6mmto Be Fixed With Six Nos Of Screw Wood Steel As Shown On Drg Duly Painted With Paint Enamelledblack. 109 Repair To Charpoygi Pipe 32Mm And Conversion / Replacement With Ply Top. Drgno. Fd-220 110 Long Rail;- Re-Threading And Fixing With Elbow After Removing And Cutting The Long Railall As Shown On Drg And As Directed. 111 Short Rail :- All As Per Description At Ser No1.01 Above But To Short Rail. 112 Legs :-All As Per Description At Ser No1.01 Above But To Legs. 113 S & F Long Rail To Charpoy Gi Made Out Of 32Mm Dia Gi Pipe Medium Grade Conf To Is:1239 Part-Iof Lengh 1.9 Mtrafter Removing The Old One. 114 Cutting , Threading And Fixing Of Short Rails Obtained From Long Rails At Ser No 1.04 Above As Per Drg After Removing The Old One. 115 Cutting , Threading And Fixing Of Legs Obtained From Short Rails At Ser No 1.05 Above As Per Drawings After Removing Exising Unservicable Legs. 116 S & F Of Check Nut 6Mm Thick 32Mm Dia Gi To The Long Rails After Removing The Old Unsv Chek Nuts. 117 S & F32mm Gi Elbow 3 Way Medium Gde Isi Marked After Removing The Old Unsv Elbow. 118 S&F Ply Wood 12Mm Thick Bwr Type Size 1980X930 After Tightining Of Frame All As Specefied With Provision Of Flat Iron Of Size 40X6mm, 900Mm Long 2 Nos With 65Mm Long 6Mm Dia Nuts And Bolts 8 Nos With Washers After Drilling Complete All As Specified After Removing The Old Unservicable Nylon Newar From Charpoy. 119 M & L Forwelding To Steel Frames Of Furniture Articles Such As Chaircb Steel With Arms, Chair Cb Steel Without Out Arms, Chair Verandah, Table Office Clerk Steel, Form With Out Back, Steel Almirah, Table Dining OrS, Locker Bed Side Steel Etc, Including Fixing Of Parts In Proper Position By Preparing The Old Welded Surfaces. Welding Shall Be Done Through Gas Welding, The Thickness Of The Metal To Be Welded N.Exe 16 Gauge. Length Of Welding N.Exe. 25Mm In Each Point, All As Directed. 120 Repair To Chair Verandah. Drgno. Fd-256 / 259, 359 121 M&L For Re-Canning Of Chair Verandah With Cane Plastic Half Round4mmwide In Mattpatternsuperior Quality As Shown On Drg And As Directed. 122 M&L For Preparation Of Old Painting Surfaces Of Any Description Width Or Girth Including Cleaning / Scraping Old Painted Surfaces With Blow Lamp Etc Denting & Filling The Depression With Putty And Rubbing The Surface There After Andpainting With One Coat Of Synthetic Enamel Paint By Spray Machine To Steel Items Complete And Colour / Shade As Directed By Engr-In-Charge And As Required.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	11-11-2021	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	18-11-2021

INR 500 /-

INR 12000.0 /-

INR 6 Lakhs /-