Purchase Of Klystron Power Supply In The Microwave Lab Of Ece Department Of This Institution.- Klystron Power Supply:Solid State With Digital Display,X Band Input Voltage:230Vac+10% 50Hz Beam Supply: Voltage : 240- 400Vdc,Variable Current : 50Ma Regu, Thiruvananthapuram-Kerala

Purchase of Klystron Power Supply in the Microwave Lab of ECE Department of this institution.- Klystron Power Supply:Solid state with digital display,X band Input Voltage:230VAC+10% 50HZ Beam Supply: Voltage : 240- 400Vdc,Variable Current : 50mA Regulation : 0.5% for 10%I/Pvariation Ripple: <mv RMS Repeller Supply : 10-270 Vdc Modulation : AM (Square) 500-2000HZ,110 V max Vp-P FM(Saw-Tooth) -50-150 HZ Connectors: 8- Pin Octal Socket for Klystron,BNC(F) for external Modulation,2-Pin Socket for Cooling fan,BNC (F) for Saw-tooth Monitoring Digital display,Standard accessories and cables.- Klystron Power Supply:Solid state with digital display,X band Input Voltage:230VAC+10% 50HZ Beam Supply: Voltage : 240- 400Vdc,Variable Current : 50mA Regulation : 0.5% for 10%I/Pvariation Ripple: <mv RMS Repeller Supply : 10-270 Vdc Modulation : AM (Square) 500-2000HZ,110 V max Vp-P FM(Saw-Tooth) -50-150 HZ Connectors: 8- Pin Octal Socket for Klystron,BNC(F) for external Modulation,2-Pin Socket for Cooling fan,BNC (F) for Saw-tooth Monitoring Digital display,Standard accessories and cables.- 1 Artix-7 FPGA : XC7A35T-1CPG236C ( 33,280 logic cells in 5200 slices (each slice contains four 6-input LUTs and 8 flip-flops) 1,800 Kbits of fast block RAM Five clock management tiles, each with a phase-locked loop (PLL) 90 DSP slices Internal clock speeds exceeding 450MHz On-chip analog-todigital converter (XADC)) 2 Zybo Z7: Zynq-7000 ARM/FPGA SoC Development Board (• ZYNQ Processor • 667 MHz dual-core Cortex-A9 processor • DDR3L memory controller with 8 DMA channels and 4 High Performance AXI3 Slave ports • High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO • Low-bandwidth peripheral controllers: SPI, UART, CAN, I2C • Programmable from JTAG, Quad-SPI flash, and microSD card • Programmable logic equivalent to Artix-7 FPGA • Memory • 1 GB DDR3L with 32-bit bus @ 1066 MHz)

Refer document

Refer document

Refer document