|
| 1 | Demolition of Unreinforced Cement Concrete in ground floors and Pavings not exceeding 15cm thick [below or above ground level] and removing rubbish to a distance exceeding 1.5 Km but not exceeding 5.0 Km and depositing where directed complete all as specified and as directed. |
| 2 | Demolition of Unreinforced Cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance exceeding 1.5 Km but not exceeding 5.0 Km and depositing where directed complete all as specified and as directed. |
| 3 | Demolition of Reinforced Cement Concrete [reinforcement cut as required to facilitate demolition] of any description and in any position not otherwise specifically provided for and removing rubbish to a distance exceeding 1.50 KM but not exceeding 5.00 KM and depositing where directed complete all as specified and as directed. |
| 4 | Demolition of Brick / Stone Masonry built in Cement Mortar including all quoins arches pillars etc and removing rubbish to a distance exceeding 1.50 KM but not exceeding 5.0 KM and depositing where directed complete all as specified and as directed. |
| 5 | Taking down existing unserviceable aluminium door frame alongwith shutters exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m eachcomplete all as specified and as directed. |
| 6 | Dismantling of Mild Steel or Wrought Iron Work of any description not otherwise provided for complete all as specified and as directed. |
| 7 | Dismantling Fencing Wire Mesh of any type complete all as specified and as directed. |
| 8 | Dismantling of GI/ Translucent/ Acylic Sheets [plain or Corrugated] as in roof covering including ridges, hips, valleys and flashings complete all as specified and as directed. |
| 9 | Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing rubbish / debris to a distance exceeding 1.5 Km but not exceeding 5.0 Km and depositing where directed complete all as specified and as directed. |
| 10 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance exceeding 1.50 KM but not exceeding 5.00 KM and depositing where directed complete all as specified and as directed. |
| 11 | Excavation in post holes each not exceeding 0.5 Cu.m, getting out in Soft / Loose soil, including returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed. |
| 12 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep in Soft / Loose soil for foundation, laying Pipes, etc. complete all as specified and as directed. |
| 13 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming. |
| 14 | Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 15 | M & L for Hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding15 cm thick watered and rammed complete all as specified and as directed. |
| 16 | M & L for PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed. |
| 17 | M & L for PCC 1:2:4, Type B-1, using 20 mm graded stone aggregate as in Coping and the like including weathering, slightly rounded or chamfered angles and throating including[straight or curved] complete all as specified and directed. |
| 18 | M & L for providing precast cement concrete 1:3:6, Type C1, using 20mm graded stone aggregate as in window or door Cills, lintels, bressummers, steps, quoin blocks [for use with masonry], string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders [for stone walling], corbels, brackets, etc. [of any section indicated], with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar 1:4 complete with joints to matchcomplete all as specified and as directed. |
| 19 | M & L for Reinforced Cement Concrete 1:1½:3, Type A-1, using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc. complete all as specified. |
| 20 | M & L for Reinforced Cement Concrete 1:1½:3, Type A-1, using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts etc complete all as specified and as directed. |
| 21 | M & L for Reinforced Cement Concrete 1:2:4, Type B-1, using 20mm graded stone aggregate as in Slabs supported on walls, beams, columns, landings, shelves and the like complete all as specified and as directed. |
| 22 | M & L for providing RCC 1:2:4, type B-1 using 20mm graded stone aggregate as in Precast Landings, Cover Slabs [for manholes etc], Shelves, bed plates and similar articles with plain faces set in cement mortar 1:6 complete all as specified and as directed. |
| 23 | M&L for providing precast cement concrete louvres and jallies, 1:3:6, Type C0, using 10mm graded stone aggregate, 25mm thick (measured solid) including all mouldings but excluding frame, set in cement mortar 1:4 including dismantling existing RCC Jallies of any description and size and removing debris to a distance exceeding 1.5 Km but not exceeding 5.0 Km and depositing where directed complete all as specified and as directed. |
| 24 | M & L for brick work with Fly Ash bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed. |
| 25 | M & L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 including necessary hammer dressing to face/ beds as required complete all as specified and directed. |
| 26 | Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits [if any] of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces complete all as specified and as directed. sides of concrete |
| 27 | Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions of any shape / cross section for fair finished surfaces of concrete complete all as specified and as directed. |
| 28 | S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 29 | S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 30 | M & L for Running Welding in repairs including preparation of surfaces to be welded and thickness of metal welded not exceeding 6mm complete all as specified and as directed. |
| 31 | M & L for Running Welding in repairs including preparation of surfaces to be welded and thickness of metal welded exceeding 6mm and not exceeding 9mm complete all as specified and as directed. |
| 32 | S & F Mild Steel work conforming to Fe - 290, Grade E-165 as in Bands, Straps, Supports or Stays for Rainwater, Ventilating Pipes, including Bolts, if required, Hooks [Stay], heavy, for Large Gates, Hook and Pintle Hinges, large Hasps and Staples, Chains, hand made Sliding Bolts, Clamps, Hold Fasts, Wall Ties, Hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles complete all as specified and as directed. |
| 33 | S & F Rolled Mild Steel work conforming to Fe 410-W, Grade-E- 250, Quality-A, as in Joist, Channel, Angle, or Tee Sections, fixed independently, without connecting plates etc [cut to ordinary lengths i.e. within 20mm of the length indicated] complete all as specified and as directed. |
| 34 | S & F Rolled Mild Steel work conforming to Fe 410-W, Grade-E- 250, Quality-A as in Roof Trusses [framed], trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing [Beam, tee, angle, channel or flat sections] including distance pieces, cleats etc complete all as specified and as directed. |
| 35 | S & F Mild Steel work as in Tubular Trusses, Posts etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS - 1161, Grade YST - 240,Medium Grade of any dia complete all as specified and as directed. |
| 36 | S & F Rolled Mild Steel work conforming to Fe 410-W, Grade-E- 250, Quality-A as in Plates [plain & chequered], Channels, Angles, square cut or notched [ordinary or counter sunk] forming holes without any attachment complete all as specified and as directed. |
| 37 | S & F MS machine made screw bolts with hexagonal or square head one end and screwed other or screwed both ends, fitted with washers and one hexagonal or square nut exceeding 5 cm long and not exceeding 10 cm long, dia of neck exceeding 5 mm but not exceeding 10 mm complete all as specified and as directed. |
| 38 | S & F MS machine made screw bolts with hexagonal or square head one end and screwed other or screwed both ends, fitted with washers and one hexagonal or square nut exceeding 15 cm long and not exceeding 22.5 cm long, dia of neck exceeding 16 mm but not exceeding 20 mm complete all as specified and as directed. |
| 39 | S & F Mild Steel framed work conforming to Fe - 290, Grade E-165, as inGrills, Gratings, Ladders etc with ends of bars shouldered and/or riveted, or forged into spikes, framed Guard Bars, Barred Iron Doors, Ladders, framed Balusters, Walk Ways, Railings, framework of Water Tanks and similar work complete all as specified and as directed. |
| 40 | S & F Rolled Mild Steel work conforming to Fe 410-W, Grade-E- 250, Quality-A as in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering, Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings [exclusive of steel sheeting or other covering, running rails and guides] and hanging, also fastening and fixing complete all as specified and as directed. |
| 41 | M & L for 1.25mm thick Plain, Black Sheet, mild steel sheeting as in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as directed. |
| 42 | S & F Steel rolling shutters, thickness of laths of 1.25 mm, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, pull push type, including taking down existing unserviceable rolling shutters of any description and size complete all as specified and as directed. Note- Safety lever locks wherever required shall be measured and paid separately at supply only Rate. |
| 43 | Supply only Safety Lever Lock Mild Steel with 4 Levers suitable for rollong shutters complete all as specified and as directed. |
| 44 | Supply only Chain link MS galvanised fencing, any size or type, complete all as specified and as directed. |
| 45 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.Note: Supply only chain link fencing shall be measured & paid separately. |
| 46 | S & F PVC Coated Chain Link MS Galvanised Fencing Mesh of size 75 mm X 75mm, 4mm dia wire with minimum 1 mm thick PVC Coating and of weight not less than 4.5 KG / Sq.m including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed. |
| 47 | S & F MS Round bars 10mm dia and over, cut to length, bent to shape and binding with MS wire as in Running Bars for Chain Link Fencing complete all as specified and as directed. |
| 48 | S & F in repairs Galvanised, 2 Strand, Steel Barbed Wire 2.24mm dia, Barbed with 2mm dia bars at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed. |
| 49 | S & F in repairs Concertina Coil Fencing with Punched Tape Concertina Coil made from High Tensile Spring Steel, High Carbon Wire conforming to IS – 4454 [Part – 1], of Grade –SM duly Hot Dipped Galvanised, 1050mm dia, 10 Metre openable length, with Galvanised coating and Punched Tape material as per IS – 513, having 50 Nos Rounds per 6 Metre length [before stretching], having medium barbs [Barb length 24±1mm, Pitch between two barbs 35±1mm], Spring Core Wire [2.5 mm thick] of high tensile strength of 165 Kg / Sq.mm with tape [0.52mm thick] and weight 43.478 Grams / Metre and fixing to “Y” or Trapezoidal shaped angle iron brackets placed at 2.00m to 3.00m apart and with 6/9 horizontal RBT [Reinforced Barbed Tape] Wire, Stud tied with GI Staples and GI Clips to retain horizontal, including necessary bolts and coating with Px Compound [Anti Rust] complete all as specified and as directed. Notes: [a] Horizontal barbed wire & angle iron supports shall be measured and paid separately under relevant items of Schedule \"A\". [b] Measurement shall be made for stretched length. |
| 50 | S & F in repairs Concertina Coil Fencing with Punched Tape Concertina Coil made from High Tensile Spring Steel, High Carbon Wire conforming to IS – 4454 [Part – 1], of Grade –SM duly Hot Dipped Galvanised, 610mm dia, 10 Metre openable length, with Galvanised coating and Punched Tape material as per IS – 513, having 50 Nos Rounds per 6 Metre length [before stretching], having medium barbs [Barb length 24±1mm, Pitch between two barbs 35±1mm], Spring Core Wire [2.5 mm thick] of high tensile strength of 165 Kg / Sq.mm with tape [0.52mm thick] and weight 43.478 Grams / Metre and fixing to “Y” or Trapezoidal shaped angle iron brackets placed at 2.00m to 3.00m apart and with 6/9 horizontal RBT [Reinforced Barbed Tape] Wire, Stud tied with GI Staples and GI Clips to retain horizontal, including necessary bolts and coating with Px Compound [Anti Rust] complete all as specified and as directed. Note: Horizontal barbed wire & angle iron supports shall be measured and paid separately under relevant items of Schedule \"A\". Measurement shall be made for stretched length. |
| 51 | S & F in repairs Concertina Coil Fencing with Punched Tape Concertina Coil made from High Tensile Spring Steel, High Carbon Wire conforming to IS – 4454 [Part – 1], of Grade –SM duly Hot Dipped Galvanised, 310mm dia, 10 Metre openable length, with Galvanised coating and Punched Tape material as per IS – 513, having 50 Nos Rounds per 6 Metre length [before stretching], having medium barbs [Barb length 24±1mm, Pitch between two barbs 35±1mm], Spring Core Wire [2.5 mm thick] of high tensile strength of 165 Kg / Sq.mm with tape [0.52mm thick] and weight 43.478 Grams / Metre and fixing to “Y” or Trapezoidal shaped angle iron brackets placed at 2.00m to 3.00m apart and with 6/9 horizontal RBT [Reinforced Barbed Tape] Wire, Stud tied with GI Staples and GI Clips to retain horizontal, including necessary bolts and coating with Px Compound [Anti Rust] complete all as specified and as directed. Note: Horizontal barbed wire & angle iron supports shall be measured and paid separately under relevant items of Schedule \"A\". Measurement shall be made for stretched length. |
| 52 | S & F Mild Steel work conforming to Fe - 290, Grade E-165 as in Hand Rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for Balusters Running Bars, for Doors, Balusters, Nosing to Steps including embeding in concrete and screwing etc, Wind Ties for roof including securing bolts, Posts and Struts in Fencing including cutting tops to shape as directed, bendingto shape, notching for wire, drilling holes or as in flat iron fillets [forsecuring wire mesh and barbed wire etc] including all necessary drilling, bolting or riveting, etc and similar work complete all as specified and directed. |
| 53 | S & F Stainless Steel Tubular Sections of standard quality of Grade SS – 316, polish finish of wall thickness not less than 1.6 mm and of size as directed, cut to length including welding at the turnings and junctions, grinding and polishing to smooth bright finish and fixing and grouting at location to achieve full strength complete as in Frame Work for Sign Boards, fixed in repairs, complete all as directed. |
| 54 | Repairs to loose hanging mild steel doors, gates, etc. exceeding 1.5 sqm but not exceeding 4sqm each including repairs to hinges, sliding bolts, frames, shutters, etc.by necesary welding as required at site for smooth functioning including making good the welded surfaces and necessary painting to match with the existing surface all as specified and as directed.Notes: Mild steel sections/ sheets, Hardwares hinges, sliding bolts,wherever required to be replaced shall be measured and paid separately under respective items of this Schedule at supply only rates. |
| 55 | M & L forPowder Coated Aluminium Sections [Minimum 50 Micron thick] of approved colour as in Door, Window, Ventilator Frames, Partitions with one or more rebates and Door, Window, Ventilator Shutters, Sliding or Openable Type, with or without Sash Bar, Aluminium section weighing 0.55 KG / RM including necessary Joining Cleats, Glazing Clips, Neoprene Rubber Packing, Powder Coated Aluminium Snap Beading, Screws, Powder Coated Aluminium Fittings such as Locking Arrangement [1 No], Suitable Handle [1 No], Stainless Steel Friction Hinges [1 No] per Window Shutter and 150mm Dia Handles on both sides, Tower bolts, 200 mm Long [2 Nos], Double Action Floor Spring Hydraulically Regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governingpivot made of brass, other parts made of mild steel heavy duty etc. per Door Shutter complete all as specified and as directed. Notes: [a] The size of aluminium sections shall be all as specified in relevant IS code and MES Schedule Part - I.[b] Panel inserts of Glass / Particleboardwherever required shall be measured and paid separately at supply only rates.[c] Unit rate quoted shall be deemed to include for cost of rubber beading, glazing clips, neoprene packing, fittings such as Handles, Butt hinges, Tower Bolts, Stainless Steel Friction Hinges and fixing only of panel inserts ofGlass / Particleboard / Gauze / Grills etc. |
| 56 | Supply only 5mm thick Sheet Glass ordinary quality in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed. |
| 57 | Supply only 18mm thick, Prelaminated Particle Board, One Side Decorative Choice Lamination and other side Balancing White, Medium Density, Interior Grade complete all as specified and as directed. |
| 58 | S & F Aluminium Composite Panel sheet of 3 mm thickwith skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30 micron fixed over Stainless Steel Frame Work with suitable Self Tapping Screws in approved pattern / size including taking down existing unserviceable boards/ sheets of any description and size complete all as specified and as directed. |
| 59 | S & F Retro Reflective High Intensity Prismatic [Type-IV] sheeting conforming to Type III of ASTDM-D 4956-01 as approved by GE including letters [Black, Roman, Italic or Indian] including necessary stops, commas, short lines, dashes, brackets, etc., [Number of alphabets not exceeding 30 Nos per side], Index Hands [Natural size] or arrows [upto 400mm long] one number, borders, etc. as per IRC 67 - 2001 in silver/white with blue/green or any other colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to Class II ASTDM - D - 1956 -01 to Aluminium Composite Panel complete all as specified and as directed. |
| 60 | S & F pre-painted Galvalume steel sheets of Trapezoidal profile having pitch 190mm, depth 29mm or Tiled Profile and thickness 0.50mm [Galvalume base-PPGL trapezoidal profile sheets], having tensile strength of 550 Mpa, fixed with aluminium self tapping screws, neoprene and EPDM washers of suitable size in roof covering complete all as specified and as directed. Note: Overlap shall be provided as specified by the manufacturer. |
| 61 | S & F pre-painted Galvalume steel Plain Sheets and thickness 0.50mm [Galvalume base-PPGL Sheets], having tensile strength of 550 Mpa, in ridges, hips, valley gutters, drip and straight flashing cut to length & bent to shape, girth sheets fixed with aluminium self tapping screws and neoprene and EPDM washers of suitable size in roof covering / cladding / eves trim / rake trim and closure trim / valley rain water gutter / down spouts and top rafters etc. complete all as specified. |
| 62 | S & F 4mm thick translucent Acrylic Sheet, plain or corrugated, as in roof covering, cladding to wall, ridges, hips, drip and straight flashing, etc. fixed with aluminium self tapping screws, neoprene and EPDM washers of suitable size complete all as specified and as directed. Note: Overlap shall be provided as specified by the manufacturer. |
| 63 | S & F 12mm thick translucent multiwall polycarbonate Sheet, any coulour, as in roof covering, cladding to wall, etc. fixed with fixed with aluminium self tapping screws, neoprene and EPDM washers of suitable size including provision of necessary caps, eaves fillers, tapes, etc. complete all as specified and as directed. |
| 64 | M & L for cutting out to \"V\" section along the existing cracks/ joints of roofs or terrace, walls, cills, jambs, etc., cleaning out, wetting, grouting with silicon sealant of approved make and making good the surfaces complete all as specified and as directed. |
| 65 | M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 10mm graded aggregate as in Sub base for flooring complete all as specified and as directed. |
| 66 | M & L for PCC 1:3;6, Type C-2, using 40 mm graded stone aggregate as in Sub base for flooring, levelling course, etc complete all as specified and as directed. |
| 67 | M & L for PCC 1:2:4, Type B-1, using 20 mm graded stone aggregate as in flooring,hard standing, plith protection, surface finished even and fair with out using extra cement complete all as specified and as directed. |
| 68 | M & L for 75 mm thick, PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in Sub base for flooring complete all as specified and as directed. |
| 69 | M & L for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc. surface finished even and smooth with out using extra cement complete all as specified and as directed. |
| 70 | M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 71 | M & L for Joint Free Glazed Ceramic Tiles, Edge Cut, Concept Type, Coloured, Premium Quality, of size 450 mm X 300 mm, 7 to 8 mm thick as in Vertical Surfaces such as Skirting, Dado etc set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 72 | M & L for Granite Stone Slabs of 18 to 20 mm thick of Colour Mexican Red / Ruby Red / Z Black / Pearl Black as in Floors, Treads of Steps, Window Cills, Cooking Platform etc., and the like with machine cut edges, Table rubbed and pre-polished to smooth mirror finish all to required sizes, granite stone slabs shall be of design / pattern as directed, including inlays, borders, margins in two or more colours / shades, designs / patterns of stone slabs, set and bedded with grey cement [slurry] and jointed andpointed flush using polymer based cementitious tiling joint filler to match the shade of the Granite Slabsincluding screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:4 including dismantling existing unserviceable stone slabs of any description and size andremoving rubbish / debris to a distance exceeding 1.5 Km but not exceeding 5.0 Km and depositing where directed complete all as specified and as directed. Note: Single stone slab shall be used for entire Width and Length of Steps, Window Cills, Cooking Platform etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded. The edges of the treads and landings shall also be provided with three Nos of grooves. |
| 73 | M & L for Glazed Polish finished coloured Chequered Cement Concrete Tiles of thickness 23 to 25mm, Designer, Premium Quality, made with M-25 Grade Precast Cement Concrete, Hydraulically pressed of size not less than 300 X 300 mm, of approved shape, colour and pattern, set, jointed and pointed in neat cement slurry to match including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:4 complete all as specified and as directed. |
| 74 | M & L for Inter Locking Paving Blocks of 80mm thick, made with M-40 Grade cement concrete using 20 mm graded stone aggregate, Hydraulically pressed of approved colour and pattern, shape and size conforming to IS - 15658 set in floorsincluding taking out existing unserviceable paver blocks of any description and size andremoving rubbish / debris to a distance exceeding 1.5 Km but not exceeding 5.0 Km and depositing where directed |
| 75 | M & L for Inter Locking Paving Blocks of 60mm thick, made with M35 Grade cement concrete using 20 mm graded stone aggregate, Hydraulically pressed of approved colour and pattern conforming to IS - 15658 set in floors including taking out existing unserviceable paver blocks of any description and size andremoving rubbish / debris to a distance exceeding 1.5 Km but not exceeding 5.0 Km and depositing where directed. |
| 76 | M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 77 | M & L for rendering to brick / concrete surfaces, 10 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 78 | M & L for rendering to stone masonry or other than fair faces of brick work, 10 mm thick in Cement Mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 79 | M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, including water proofing compound, mixing water proofing compound as per manufacturers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. |
| 80 | M & L for rendering to stone masonry or other than fair faces of brick work, 15 mm thick in Cement Mortar 1:4, including water proofing compound mixing water proofing compound as per manufacturers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. |
| 81 | M&L for keyed pointing to Random Rubble Masonry, uncoursed or brought upto course, in cement mortar 1:3 complete all as specified and as directed. |
| 82 | M & L for removing Plants with roots by chipping Walls / Beams / Junctions of Vertical Stacks / Water Supply lines or at any other location as directed, applying recommended chemical to prevent growth or plants and making good the disturbed portion with Cement Mortar 1:3 or with PCC 1:2:4, Type B0 [using 12.5 mm graded aggregate] and painting the surfaces to match with existing treatment / finishes and removing debris to a distance exceeding 1.50 KM but not exceeding 5.00 KM complete all as directed. |
| 83 | M & L for Three coats of white washing on newly plastered wall surfacesincluding necessary preparation of surfaces complete all as specified and as directed. |
| 84 | M & L for One coat of white wash on old decorated surfaces of walls, pillasters, cornices, etc., including necessary preparation of surfaces by brooming down or steel wire brushing complete all as specified and as directed. |
| 85 | M & L for One coat of Acrylic Washable Distemper on on old decorated surfaces of walls, pillasters, cornices, etc., including necessary preparation of surfaces by washing, rubbing down and stopping complete all as specified and as directed. |
| 86 | M & L for One coat of Cement Based paint on old painted walls, pillasters, cornices, etc., including necessary preparation of surfaces by washing, rubbing down and stopping complete all as specified and as directed. |
| 87 | M & L for Two coats of Cement Based paint over a coat of Alkali Resistant Primer on newly plastered walls,pillasters, cornices, etc., including necessary preparation of surfaces complete all as specified and as directed. |
| 88 | M & L for One coat of Weather Proof Exterior Emulsion Paint [100% Acrylic] on old painted walls, pillasters, cornices, etc., including necessary preparation of surfaces by washing, rubbing down and stopping complete all as specified and as directed. |
| 89 | M & L for Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] over a Coat of Weather Proof Exterior Primer of same manufacturer as that of paint on newly plastered wall / Ceiling surfaces including necessary preparation of surfaces complete all as specified and as directed. |
| 90 | M & L for One coat of synthetic eamel paint on old painted wooden surfaces of any description not other wise described over 10 cm width or girth incuding necessary preparation of surfaces complete all as specified and directed. |
| 91 | M & L for One coat of synthetic eamel paint on old painted steel surfaces of any description not other wise described over 10 cm width or girth incuding necessary preparation of surfaces complete all as specified and directed. |
| 92 | M & L for One coat of synthetic enamel paint old painted steel surfaces of any description not other wise described, not exceeding 10cm width or girth including necessary preparation of surfaces complete all as specified and as directed. |
| 93 | M & L for Two coats of Synthetic Enamel paint over one coat of Red Oxide / Zinc Chrome Primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed. |
| 94 | M & L for Two coats of synthetic enamel paint over one coat of Red Oxide / Zinc Chrome Primer on new steel surfaces not exceeding 10cm width or girth including necessary preparation of surfaces complete all as specified and as directed. |
| 95 | M & L for Two Coats of synthetic enamel paint over a coat of plaster coat primer on newly plastered surfaces or on new Brick, Stone, Concrete, Asbestos Cement, Particle Board surfaces over 10cm width or girth including necessary preparation of surfaces complete all as specified and as directed. |
| 96 | M & L for One Coat of synthetic enamel paint on old painted Brick, Stone, Concrete, Asbestos Cement, plaster surfaces or Particle Board surfaces over 10cm width or girth including necessary preparation of surfaces complete all as specified and as directed. |
| 97 | M & L for Writing letters or figures [Block, Roman, Italic or Indian] not exceeding 30 cm high with thick paint to stand out boldly and solidly without showing signs of brush marks complete all as specified and as directed. |
| 98 | M & L for Writing Index Hands [Natural Size] or Arrows [up to 400mm long] with thick paint to stand out boldly and solidly without showing signs of brush marks complete all as specified and as directed. |
| 99 | M & L for Writing Stops, Commas, Hyphens and Brackets etc. [Block, Roman, Italic or Indian] with thick paint to stand out boldly and solidly without showing signs of brush marks complete all as specified and as directed. |
| 100 | S & F Mirror finished Stainless Steel [Grade 304] 3D Letters of English or Hindi, height not exceeding 250 mm, made with 3 mm thick plain sheet of suitable size / pattern, fixed on Plastered Surfaces / Granite Dado, etc., fixed in repairs complete all as specified and as directed. |
| 101 | NOTE for Sl. Item No. 1 to 100: The work shall be carried out to buildings/ structures up to Four Stories/ 15 metres height and the rates quoted are deemed to be including providing double scaffolding and safety measures as required and removal of the same on completion complete all as specified and as directed. Nothing shall be paid extra on this account. |
