Repair / Polishing / Recanning Of Wooden Furniture Items Under Ge Dipatoli - 1 Chair Dining Fd-1105 / 279S&F New Components Of 2Nd Class Hw ( Shisham ) Including Dismantling Unservicable Onecomplete All As Specified And As Directed. ( A ) R, Dipatoli-Jharkhand

Repair / Polishing / Recanning Of Wooden Furniture Items Under Ge Dipatoli - 1 Chair Dining Fd-1105 / 279S&F New Components Of 2Nd Class Hw ( Shisham ) Including Dismantling Unservicable Onecomplete All As Specified And As Directed. ( A ) Rear Leg 2 ( B ) Front Leg 3 ( C ) Rear / Front / Side Rail 4 ( D ) Stiffener 5 ( E ) Back Rest 6 ( F ) S & F Recanningin Godrej Pattern With 2Mm Wide And 0.6Mm Thick For Centre Portion And 4Mm Wide Plastic Cane For Borders Including Dismantling Unserviceable One Complete All As Specified And As Directed. 7 ( G ) Preparation Of Sufaces By Thoroughly Rubbing With Emery Paper, Applying Raw / Burnt Seina Uniformly And Polishing One Or More Coats With French Polish To Obtain A Glossy Finish With And Including Fixing 4 Nos Nylon Buffers At The Bottom Of The Chairs After Removing Old Buffers Complete All As Specified And As Directed. 8 Chair Easy Fd-1108 / 229S&F New Components Of 2Nd Class Hw ( Shisham ) Including Dismantling Unservicable Onecomplete All As Specified And As Directed. ( A ) Rear Leg 9 ( B ) Front Leg 10 ( C ) Arms 11 ( D ) Front / Back / Side Rail Of Seat 12 ( E ) S&F Recanning Seat & Backin Godrej Pattern With 2Mm Wide And 0.6Mm Thick For Centre Portion And 4Mm Wide Plastic Cane For Borders Including Dismantling Unserviceable One Complete All As Specified And As Directed. 13 ( F ) Preparation Of Sufaces By Thoroughly Rubbing With Emery Paper, Applying Raw / Burnt Seina Uniformlyand Polishing One Or More Coats With French Polish With French Polish To Obtain A Glossy Finish With And Including Fixing 4 Nos Nylon Buffers At The Bottom Of The Chairs Complete All As Specified And Directed. 14 Chair Writing Fd-202 / 250 / 280S&F New Components Of 2Nd Class Hw ( Shisham ) Including Dismantling Unservicable One Complete All As Specified And As Directed. ( A ) Rear Leg 15 ( B ) Front Leg 16 ( C ) Rear / Front / Side Rail 17 ( D ) Arms. 18 ( E ) Back Rest 19 ( F ) Stiffener 20 ( G ) S&F Recanningseat & Back Of The Chair And Recanning In Godrej Pattern With 2Mm Wide And 0.6Mm Thick For Centre Portion And 4Mm Wide Plastic Cane For Borders Including Dismantling Unserviceable One Complete All As Specified And As Directed. 21 ( H ) Preparation Of Sufaces By Thoroughly Rubbing With Emery Paper, Applying Raw / Burnt Seina Uniformlyand Polishing One Or More Coats With French Polish To Obtain A Glossy Finish With And Including Fixing 4 Nos Of Nylon Buffers At The Bottom Of The Chairs Complete All As Specified And Directed. 22 Bed Plywood Top Fd-245 & 246S&F New Componentscomprising Of Following Outer Member Made Of Shisham Wood And Internal Frame Made Of Cheer Wood, Covered Both Sides Ofboard With 3.5 Mm Thick Ost Plywoodwith 12Mm Thick Half Cut Teak Wood Beading Including Dismantling Unservicable Oneall As Specified And As Directed. ( A ) Head Board 23 ( B ) Foot Board 24 ( C ) S&F New Teak Plywoodof Head Board On Both Sidesalongwith 30Mm X 6Mm Teakwood Beading On Top Including Dismantling Unserviceable One Complete All As Specified And As Directed. 25 ( D ) S&F New Teak Plywoodof Foot Board On Both Sides Along With 30Mm X 6Mm Teak Wood Beading On Top Including Dismantling Unserviceable One Complete All As Specified And As Directed. 26 ( E ) S&F Newcomponents Of 2Nd Class Hw ( Shisham ) Including Dismantling Unservicable Onecompleteall As Specified And As Directed. ( I ) Long Rail Of Size ( 90 X 35 ) Mm 27 ( Ii ) Stiffner Of Size ( 60 X 40 ) Mm 28 ( Iii ) Wooden Bracket 29 ( F ) S&F Top Made Of 12Mm Bwr Phenol Bonded Commercial Plywood With Suitable Screwsincluding Dismantling Unservicable Oneall As Specified And As Directed. 30 ( G ) Preparation Of The Surfaces By Thoroughly Rubbing With Emery Paperboth Surfaces Of The Head Board, Foot Board Including Legs And Long Rails And Polishing With French Polish One Or More Coat To Obtain A Glossy Finish Complete All As Specified And As Directed. 31 Table Dining For 08 Personsfd-30 ( M ) / 273 & 239 S&F New Components Of 2Nd Class Hw ( Shisham ) Including Dismantling Unservicable One Complete All As Specified And As Directed. ( A ) Leg 32 ( B ) Top Rail ( Long / Front ) 33 ( C ) Top Rail ( Short / Side ) 34 ( D ) S&F Top 18Mm Thick Pre-Laminated Mdf Board Alongwith 4Mm Thick Teak Wood Beading Alround Including Dismantling Unserviceable One Complete All As Specified And As Directed. 35 ( E ) Preparation Of Surfaces With Sand / Emery Paper And Applying French Polish One Or More Coat Of Approved Quality To Achieve Uniform Smooth Texture And High Glossy Finish After Filing Holes With Beas Wax Complete All As Specified And As Directed. 36 Table Dining For 06 Personsfd-30 ( M ) / 273 & 239 S&F New Components Of 2Nd Class Hw ( Shisham ) Including Dismantling Unservicable One Complete All As Specified And As Directed. ( A ) Leg 37 ( B ) Top Rail ( Long / Front ) 38 ( C ) Top Rail ( Short / Side ) 39 ( D ) Top 18Mm Thick Pre-Laminated Mdf Board Alongwith 4Mm Thick Teak Wood Beading Alround Including Dismantling Unserviceable One Complete All As Specified And As Directed. 40 ( E ) Preparation Of Surfaces With Sand / Emery Paper And Applying French Polish One Or More Coat Of Approved Quality To Achieve Uniform Smooth Texture And High Glossy Finish After Filing Holes With Beas Wax Complete All As Specified And As Directed. 41 Teapoyfd-382 / 232 & 278S&F New Components Of 2Nd Class Hw ( Shisham ) Including Dismantling Unservicable One Completeall As Specified And As Directed. ( A ) Leg 42 ( B ) Top Rail ( Long / Front ) 43 ( C ) Top Rail ( Short / Side ) 44 ( D ) Stiffener 45 ( E ) Top18mm Thick Pre-Laminated Mdf Board Alongwith 4Mm Thick Teak Wood Beading Alround Including Dismantling Unserviceable Oneall As Specified And As Directed. 46 ( F ) Preparation Of Surfaces With Sand / Emery Paper And Applying French Polish One Or More Coat Of Approved Quality To Achieve Uniform Smooth Texture And High Glossy Finish After Filing Holes With Beas Wax Complete All As Specified And As Directed. 47 Table Centrefd-274 & 235S&F New Components Of 2Nd Class Hw ( Shisham ) Including Dismantling Unservicable One Complete All As Specified And As Directed. ( A ) Leg 48 ( B ) Top Rail ( Long / Front ) 49 ( C ) Top Rail ( Short / Side ) 50 ( D ) Stiffener 51 ( E ) Top18mm Thick Pre-Laminated Mdf Board Alongwith 4Mm Thick Teak Wood Beading Alround Including Dismantling Unserviceable One Complete All As Specified And As Directed. 52 ( F ) Preparation Of Surfaces With Sand / Emery Paper And Applying French Polish One Or More Coat Of Approved Quality To Achieve Uniform Smooth Texture And High Glossy Finish After Filing Holes With Beas Wax Complete All As Specified And As Directed. 53 Table Pegfd- 277 & 236 / 384S&F New Components Of 2Nd Class Hw ( Shisham ) Including Dismantling Unservicable One Completeall As Specified And As Directed. ( A ) Leg 54 ( B ) Top Rail ( Long / Front ) 55 ( C ) Top Rail ( Short / Side ) 56 ( D ) Stiffener 57 ( E ) Top18mm Thick Pre-Laminated Mdf Board Alongwith 4Mm Thick Teak Wood Beading Alround Including Dismantling Unserviceable One Complete All As Specified And As Directed. 58 ( F ) Preparation Of Surfaces With Sand / Emery Paper And Applying French Polish One Or More Coat Of Approved Quality To Achieve Uniform Smooth Texture And High Glossy Finish After Filing Holes With Beas Wax Complete All As Specified And As Directed. 59 Table Writingfd-249 & 275 ( A ) Top Made Out Of 18 Mm Thick Pre-Laminated Mdf Board Duly Providing 4 Mm Thick Teak Wood Beading Alround Including Dismantling Unserviceable One Complete All As Specified And As Directed. 60 ( B ) S&F New Components Of 2Nd Class Hw ( Shisham ) Including Dismantling Unservicable Oneall As Specified And As Directed. ( I ) Leg 61 ( Ii ) Leg ( Short ) 62 ( Iii ) Side / Bottom Rail 63 ( C ) Backmade Out Of 6 Mm Thick Plywood Commercial Including Dismantling Unserviceable One Complete All As Specified And As Directed. 64 ( D ) Side Made Out Of 18 Mm Thick Pre-Laminated Mdf Board One Side Laminated Finish Including Dismantling Unserviceable One Complete All As Specified And As Directed. 65 ( E ) Stiffner ( Long ) 66 ( F ) Drawer Made Out Of 18 Mm Thick Mdf Board Including Provision Of Knob Including Dismantling Unserviceable One Complete All As Specified And As Directed.Note :-Knob Shall Be Be Aluminium Anodised ( Dark Brown ) Chromium Plated Of Approved Size And Quality 67 ( G ) Complete Cupboard Including Drawer From The Table Writing And Made Of 18 Mm Thick Pre-Laminated Mdf Board Including Back Provided With 6Mm Thick Commercial Plywood Including Dismantling Unserviceable One Complete All As Specified And As Directed.Note :- ( A ) Knob Shall Be Aluminium Anodized ( Dark Brown Chromium Plated Of Approved Size & Quality ) . ( B ) Hinges Shall Be 50 Mm Of Approved Quality. 68 ( H ) Preparation Of Surfaces With Sand / Emery Paper And Applying French Polish One Or More Coat Of Approved Quality To Achieve Uniform Smooth Texture And High Glossy Finish After Filing Holes With Beas Wax Complete All As Specified And As Directed. 69 Hat Stand ( Fd-361 / 362 ) ( A ) S & F 4Mm Thick Teak Face Plyto Make Front Side Along With Teak Wood Edging Of Size 35Mm X6 Mm Including Dismantling Of Old Unserviceable One Complete All As Specified, Directed And Shown On Drawings. 70 ( B ) S & F Of Back Commercial Plywood Including Dismantling Unserviceable One Complete All As Specified, Directed And Shown On Drawings. 71 ( C ) S & F Of Brass Pegs Of Size 75Mm ( W ) X 120Mm ( H ) Including Dismantling Of Old Unserviceable One Complete All As Specified, Directed And Shown On Drawings. 72 ( D ) S & F Of 5Mm Looking Mirror With Edging Including Dismantling Of Old Unserviceable One Complete All As Specified, Directed And Shown On Drawings. 73 ( E ) M & L For Preparation Of Surfaces With Sand / Emery Paper And Applying French Polish One Or More Coat Of Approved Quality To Achieve Uniform Smooth Texture And High Glossy Finish After Filing Holes With Bees Wax Complete All As Specified And As Directed. 74 Table Bed Side Fd-276 ( A ) S & F Of Top Of 18Mm Thick Pre-Laminated Mdf Board Including Dismantling Unserviceable One Complete All As Specified, Directed And Shown On Drawings. 75 ( B ) S&F Of Side Of 18Mm Thick Pre-Laminated Mdf Boardincluding Dismantling Unserviceable One Complete All As Specified, Directed And Shown On Drawings. 76 ( C ) S&F Of Shelf Of 12 Mm Thick Prelaminated Mdf Board Including Dismantling Unserviceable One Complete All As Specified, Directed And Shown On Drawings. 77 ( D ) S&F Of Back Ply Of 6Mm Plywood Including Dismantling Unserviceable One Complete All As Specified, Directed And Shown On Drawings. 78 ( E ) M & L For Preparation Of Surfaces With Sand / Emery Paper And Applying French Polish One Or More Coat Of Approved Quality Complete All As Specified And As Directed. 79 Side Boardfd-372 ( A ) S & F Door Shutters ( Both ) Made Of 18Mm Thick Pre-Laminated Mdf Boardduly Providing 6Mm Thick Teak Wood Beading Alround With Fittings And Fixtures Including Dismantling Unserviceable Onecomplete All As Specified And As Directed.Note :- ( I ) Knob Shall Be Aluminium Anodized ( Dark Brown Chromium Plated Of Approved Size & Quality ) . ( Ii ) Hinges Shall Be 50 Mm Of Approved Quality. 80 ( B ) Front Portion Of The Drawer As To Match With The Existing Made Out Of 18Mm Thick Pre-Laminated Particle Board With Laminated Finish With And Including Knob Including Dismantling Unserviceable One Complete All As Specified And As Directed. 81 ( C ) S&F Top Made Out Of 18Mm Thick Pre-Laminated Particle Board Withlaminated Finishduly Providing 4Mm Thick Teak Wood Beading Alround Including Dismantling Unserviceable One Complete All As Specified And As Directed. 82 ( D ) S&F 4Mm Thick One Side Teak Face Plywood On Sides Including Dismantling Unserviceable One Complete All As Specified And As Directed. 83 ( E ) Backmade Out Of6mm Thick Commercial Plywood Including Dismantling Unserviceable One Complete All As Specified And As Directed. 84 ( F ) Preparation Of Surfaces With Sand / Emery Paper And Applying French Polish One Or More Coat Of Approved Quality To Achieve Uniform Smooth Texture And High Glossy Finish After Filing Holes With Beas Wax Complete All As Specified And As Directed. 85 S&F Steel Work In Tubular Trusses Including Special Shaped Washer Etc Complete Using Erw Or Induction Butt Welded Tubes Confirming To I.S. 1161-1998

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	01-11-2021	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	08-11-2021

INR 500 /-

INR 49560.0 /-

INR 24.78 Lakhs /-