|
| 1 | Boat Reconnaissance Pneumatic 3 Men 2A | Boat Reconnaissance Pneumatic 3 Men 2A as per specification No: CQAE/1940/1520(b) : 2006 and Cat/Part No 14/1940-000114:- (a) Each boat Reconnaissance Pneumatic 3 Men 2A will be made ofPolychloroprene coated Nylon Fabric adhering to specification No CQAE/1940/1520(b) and Cat/Part No 14/1940-000114. Details are as under :-(i) Overall length- 3400 to 3451 mm(ii) Length upto transom - 2571 to 2649 mm(iii) Hull diameter - 401 to 425 mm(iv) Hull rise at Bow End - 588 to 617.4 mm(v) Inside width at OBM bracket Assy- 580 to 605 mm(vi) Total wt including accessories - 65 + 3 Kgs(vii) Chambers - 04 Nos(viii)Free board- 254 mm with 340 kg load. |
| 2 | Mooring Pin | Mooring Pin (Drg No. IMPD-0411).A mooring pin with 10 meters longpointer for mooring the boat. The pointer will be fastened securely to the aluminium alloy ‘D’ ring at the bow end of the boat. |
| 3 | Bailer | Bailer (Drg No IMPD-0417). A folding bailer of rubberised fabric 165 mm x 152 mm bottom dia will be provided. |
| 4 | Keel | Keel (Drg No. IMPD - 0420, 0419/1, 0418/1).(01 Set/ recceBoat). Keel wooden to be made by marine plywood. The bow end section of the keel to be shaped to provide the necessary lift to the boat. The aluminium strip provided on this section should fit into the notch of the bow end plank riveted to the bow end of the hull. The stern end section of the keel will have dovetailed portion, which must fit into the notch provided at the bottom of the wooden transom at the stern of the hull |
| 5 | Floor Board and Fiber Planks | Floor Board and Fiber Planks as per (01 Set/ recce boat) (Drg No IMPD - 2047A, 2049). Valise for Floor. Floor Board and Grating will be packed in Canvas size 560 x 1480 x 250 mm. FRP Floor is to be provided on the bottom floor fabric to provide a rigid and hard surface for the armed persons to stand. The top of FRP Floor will be 2 mm raised checkered surface for providing a good grip duringmovement. Cross grains will be provided for grip of the foot while paddling the Boat. Three nos. of FRP Floor boards will be adjacent to each other which covers the floor area adequately without slipping |
| 6 | Foot pump | Foot pump (Drg No IMGA - 0068) (Sheet 2 of 2). (02 Nos/recce boat). Following accessories and Hydraulic Foot pump packed in canvas size Dia 275 x L-2000 mm. A double nozzle foot pump (Cat part No 14/1940-000030) will be provided for inflating boat. The bellow of the pump made of rubberised fabric one at the top and the other at the bottom with a cushion type spring in between them. The pump will be complete with a valve, foot rest and two nozzles for attaching rubber hoses. |
| 7 | Folding Paddle Assy | Folding Paddle Assy (Drg No - IMSA 0151). (02 Nos/ recceboat). A pair of aluminium paddles 1834 mm in length to be provided with each boat for manual propulsion. The paddles will be made into two sections with aluminium couplers and sleeves and to be folded for ease of carriage. The paddles will be carried in the accessories valise in folded condition |
| 8 | Seat | Seat (Drg No IMPD - 0412). (01 Nos/ recce boat). The seat made of cotton canvas and will reinforced with 10-12mm O cane. |
| 9 | Repair Kit | Repair Kit- (01 Nos/ recce boat) (aa) Adhesive Solution - 150gm in Aluminium bottle. (ab) Cross linking agent in - Quantity sufficient for the Aluminium bottle with adhesive Separate droppers (ac) Brush painting flat 12 mm - 01 Noswide (ad) Crucible Plastic - 01 Nos (ae) French Chalk - 60gms packet (af) Neoprene coated nylon - 0.5 Metersfabric (ag) Needle Sail makers 76 mm - 02 Nos. (ah) Scissors 150 mm long- 02 Nos. (aj) Sand paper rough- 01 Sheet. (ak) Spatula wooden- 01 Nos.(al) Thread Nylon sewing- 10 Mtr |
| 10 | Boat Bag | Boat Bag.The Boat, without accessories, is rolled and packed in abag made of waterproof canvas along with the repair kit. The size of the bag is 550 mm in diameter having length of 1400 mm. The weightof the Valise with boat folded is approx. 39.5 Kgs. |
| 11 | Valves | Valves (Drg No IS : 320 & IMPD – 0436/A).The valve used for inflation / deflation will be two way valve. It will consist of two sections, the bottom section will be the hull and the top section screwed into the bottom portion. The brass nozzle will provide a convenient device for attaching the rubber pipe of the foot pump. For inflation, the top portion of the valve is to be fully loosened from the bottom portion, which is fixed to the hull. When inflation has been achieved the valve is closed by fully tightening the top portion of the valve. |
| 12 | Grating | Grating (Drg No IMPD – 0410A). A wooden grating made of marine plywood will be provided to cover the bow end portion of the floor. It is placed over the bow end section of the keel |
| 13 | Lifting Plank | Lifting Plank (Drg No IMPD – 0407). A folding plank made of marine by wood in two sections and joined together with rubberised fabric. It will be placed under the bow end section of the keel to provide stiffness to the bottom fabric. |
| 14 | Out Boat Motor (OBM) 3.3 HP 2 Stroke Mariner | Out Boat Motor (OBM) 3.3 HP 2 Stroke Mariner. Specification are as under :- (a) Prop shaft Rated Horsepower- 3.3hp (2.5 kw). (b) Max RPM (WOT)- 4500-5500 (c) Cylinder/Configuration- 01 Nos (d) Displacement- (CID/cc)-4.6 cu in (74.6cc) (e) Bore/Stroke- 47x43mm. (f) Cooling system - Water cooled. (g) Ignition - Capacitor Discharge.(h) Starting- Manual (j) Gear Ratio- 2.15:1. (k) Gear Shift- F-N. (l) Steering - Tiller (360\"). (m) Alternator System - N/A (n) Trim Positions - 04. (o) Fuel tank- Integral 1.4 ltrs. (p) Weight - 13 Kg.(q) Shaft length - 15\" (M). (r) Propeller Drive - Shear pin. (s) Prop Selection (Pitch) - 6\"-7\".(t) Induction system - Loop Charged (1 carb). (u) Oil injection- Petrol premix. |
| 15 | Mega Phone | Mega Phone.25W PA Megaphone. 5 core HW 20F USB Megaphoneoutdoor PA system. HBM 60 CC over the head microphone with 3.5 mmjack. Make: Ahuja/Pyle-Pro. (01 Nos/ recce boat). |
| 16 | Synthetic Life jacket | Synthetic Life jacket as per IMO standards/IS-6685(2009).(i) Buoyancy - 16 Kgs (Min)(ii) Vest type- Large Size(iii) Time - 2 Hours or more(iv) Colour - Combat Patten(v) Material - Plastic foams |
| 17 | Life Buoy | Life Buoy.As per IMO Standards/IS 5326/2007. (01 / recce boat)(i) Material - Polyethylene(ii) Outer Diameter - 700 mm (iii)Weight - Not less than 1.4 Kg(iv) Colour - Orange/Black |
| 18 | Synthetic Rope | Synthetic Rope 13mm dia.(100 Mtr / recce boat)(i)Breaking Strength- 1000 kg min(ii)Material- PP/Nylon |
