Procurement Of Item “Spray Dryer (Table Top Model)”- 1. Spray Dryer (Table Top Model) (For Research Purpose) 01 Type Plug In System Table Top. Suitable For Aqueous / Aqueous + Solvents /Solvents Feeds Evaporation Rate 1000 Ml /Hr Water Evaporation-Maharashtra

Procurement Of Item “Spray Dryer (Table Top Model)”- 1. Spray Dryer (Table Top Model) (for Research Purpose) 01 Type Plug in system Table Top. Suitable for Aqueous / Aqueous + Solvents /Solvents Feeds Evaporation rate 1000 ml /hr water evaporation Temp. range Ambient to 280°C, accuracy ± 1°C in steps of 0.1°C Temp. sensors 03 Nos., (inlet / outlet /safety sensors) Power supply 220-240VAC 50Hz; Single phase Max. 15A Heater Capacity 3 KW. Aspirator 50 NM3/hr, 0 to -250 mm of WC (Digital seven segment display) thru VFD 2900 rpm, 3 phase motor with single phase 230VAC input & 3 phase 230VAC output MOC for supporting Stand Mild Steel Powder Coated (Siemens Grey) Air for atomization or Gas Air compressor, 100 % Oil free noise free silent with wheels for easy movement, non-lubricated 5 to 8 bar. Nitrogen or Carbon dioxide gas to be used for Atomization instead of Air as & when required. Air blower Side Channel Blower. The blower will be located before the heater, so that it does not handle any powder laden air, unlike the case where the blower is located after the dryer & should be provided with a VFD for adjustment of the air flow rate. Air pressure Regulator 0 to 10 kg/cm2 with 40 microns filter & Moisture drain valve. Feed pump: Peristaltic pump with variable flow rate. Feed pump Calibration (in-built) & setting in ml/min with reverse function. 1250 ml/hr or more MOC of Drying chamber & Cone Borosilicate Glass Spark tested, Stress Relieved & Annealed. 9” Diameter two-piece construction with SS Clamps for ease of assembly & Washing. Cyclone separator & Receiver Borosilicate Glass Spark tested, Stress Relieved & Annealed with 100 ml Threaded receiver so that there are no leakages. MOC of heater SS 304 fitted with kanthal A1 heater of 3 kW Connecting tubing PP Piping Bag Filter For collection of fines from the exhaust air. The filter should be housed in a Threaded Borosilicate enclosure to avoid any leakages. Washable PP Bag to be provided as bag filter. Spray system SS 316L Co-current two fluid nozzles (0.7mm) with deblocking system. Easy spring-loaded system for cleaning the Nozzle. Tube of peristaltic Pump & nozzle of rings & Gasket of the system All Food Grade silicon Dimensions in mm 700×650×1200 Digital indicator for Pressure/ Vacuum Weight 70-80 Kg Control system The system should be fully controlled (heater, feed flow rate, aspirator rate, de-blocking strokes, etc.) through PID Controller / In-built controller / VFD. Mains supply to the system through ELCB / MCB

Refer document

Refer document

Refer document