Installation Of Submersible And Construction Of Over Head Reservoir With Pvc Pipe Line Water Supply At Biscopa Under 15Th. Fc ( Tide ) For The Year 2020-21 , Earthwork In Excavation For Foundation Of Structures As Per Drawing And Technical Specification Including Setting Out, Removing, Spreading Or Stacking Of Spoils Within A Lead Of 150 M. As Directed And Including Trimming The Sides Of The Trenches, Leveling, Dressing And Ramming The Bottom, Complete As Per Direction Of The Engineer-In-Charge In All Sorts Of Soil Excluding Marshy Soil & Rocks ( Soft Or Hard ) By Manual Means. , Earthwork In Filling In Foundation Trenches With Good Earth In Layers Not Exceeding 15Cm. Including Watering And Ramming Layer By Layer Complete With Earth Obtained From Excavation Of Foundation Or From Fresh Excavati On Of Land Arranged By Department Within A Lead Of 150 M. , Sand Filling In Foundation Trenches And At The Back Of Abutments, Wing-Walls Etc. With Good Local Sand Free From Earth In Layers Not Exceeding 15 Cm. Including Inundating Each Layer By Profuse Water And Poking And Ramming Layer By Layer Complete Including Supply Of Sand. Quality Of Sand Is To Be Approved By The Engineerin- Charge. , Single Brick Flat Soling Of Picked Jhama Bricks Including Ramming And Dressing Bed To Proper Level And Filling Joints With Local Sand. ( P-11, Item-1 ) , Ordinary Cement Concrete ( Mix 1:2:4 ) With Graded Stone Chips ( 20 Mm Nominal Size ) , . Providing And Laying Design Mix Concrete For Plain / Reinforced Concrete Work In Any Part Of Bridge ( Excluding Bottom Plugging ) With Coarse Aggregates Of Appropriate Nominal Size And Grading, Fine Aggregate ( Sand ) Conforming To Proper Grading Zone, Both Of Approved Quality And Cement, As Necessary, Including Labour, Cost And Carriage Of All Materials And Including Preparation Of Design Mix, Approval Of The Same By The Engineer-In-Charge And Cost For Quality Control, Sampling, Testing Etc. All Complete But Excluding Cost Of Labour And Materials For Formwork & Reinforcement Works.M20 , Supplying, Fitting And Placing Hysd Bar Reinforcement In Sub-Structure Including Initial Straightening, Straightening Of Coils Bars, Removal Of Loose Rust ( If Any ) , Cutting To Requisite Length Bending, Binding With Annealed Wire Not Less Than 1 Mm In Size And Conforming To Is 280 At Every Intersection Hooked And Bent To Correct Shape And Placed On Forms Etc.Including Cost Of Black Annealed Wire And Cost Of Loading, Unloading, Carriage Of All Steel Materials Complete As Per Drawing And Technical Specifications And Direction Of Engineer-In-Charge. , Hire And Labour Charges For Shuttering With Or Without Staging Upto 4.0 M Height Using Approved Stout Props With Wooden Planks / Ply Wood / Steel Sheet Plate With Required Bracing For Any Kind Of Plain Or Reinforced Concrete Works In All Sorts Of Minor Structure Including Culvert, Box Culvert, Cross-Drain Etc. The Rate Is Inclusive Of Fitting, Fixing And Striking Out After Completion Of Work As Per Specification And Direction. , A ) Hire And Labour Charges For Shuttering For Concrete Work In Overhead R.C. Reservoir On Separate R.C. Frame Including Fitting, Fixing And Striking Off After Compeltion Of Work Including Staging Upto 4 M Using Ply Board Or Steel Shuttering. ( Not Applicable For Resting On Roof Top ) , B ) 25 Mm To 30 Mm Thick Shuttering Without Staging In Foundation. , Brick Work With 1St Class Bricks In Cement Mortar ( 1:6 ) 250 Thk For Super Structure , Brick Work With 1St Class Bricks In Cement Mortar ( 1:4 ) 125 Thk , Plastering ( To Wall, Floor, Celling, Etc. ) With Sand And Cement Mortar Including Rounding Off Or Chamfering Corners As Directed And Raking Outjoints Including Throating, Nosing And Drip Course, Scaffolding / Staging Where Necessary ( Ground Floor ) . ( Excluding Cost Of Chipping Over Concrete Surface ) , B ) 15 Mm Thick Inside & Out Side Plaster With 1:6 Cement Mortar. , C ) 20 Mm Thick Inside Side Plaster With 1:6 Cement Mortar. , Artificial Stone In Floor, Dado, Staircase Etc With Cement Concrete ( 1:2:4 ) With Stone Chips, Laid In Panels As Directed With Topping Made With Ordinsry Or White Cement Application Of Cement Slury , Net Cement Punning ( Same As Plastering ) , Supplying , Fitting And Fixing Windows And Ventilators With Or With Out Integrated Grills Including Hoisting In Position , Straightening If Required Fixing Lugs In Cement Concrete ( 1:2:4 ) With Stone Chips 20Mm Down ( B ) Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizontal Glazing Bars. [ The Extra Rate Admissible For The Openable Portion Only ] ( Viii ) M.S Integrated Grill As Per Approved Design Integrated With Steel Window Or Ventilator, Joints Continuously Welded With M.S Flats And Bars. , Supplying 1.5 Mm Thick M.S Sheet Fitted And Fixed On One Or Both Face Of M.S / W.I Gate Etc. With Point Welding At Not More Than 150Mm Apart Complete In All Respect As Per Design Including Cost Of All Labour And Materials. , Protective And Decorative Textured Exterior High Class Matt Finish Paint Of Approved Quality, Composed Of Special Tharmoplastic Resin Containing Fine Crystalline Additives Derive From Granite As Per Manufacturers Specification And As Per Direction Of Eic To Be Applied Over Acrylic Primer As Required. The Rate Includes Cost Of Material, Labour, Scaffolding And All Incidental Charges But Excluding The Cost Of Primer. , B ) Priming One Coat On Steel Or Other Metal Surface With Synthetic Oil Bound Primer Of Approved Quality Including Smoothening Surface By Sand Papering Etc. , Acrylic Distemper To Interior Wall, Ceiling With A Coat Of Solvent Based Interior Grade Acrylic Primer ( As Per Manufacturers Specification ) Including Cleaning And Smoothning Of Surface. Two Coats , A ) Painting With Best Quality Synthetic Enamel Paint Of Approved Make And Brand Including Smoothing Surface By Sand Papering Etc. Including Using Of Approved Putty Etc. On The Surface , If Necessary , ( B ) On Steel Or Other Metal Surface : ( Iv ) Two Coats ( With Any Shade Except White ) , Supplying, Fitting And Fixing Cast Iron Raised Rain Proof Tank Cover 500 Mm Dia. With Locking Arrangements ( Weight Not Less Than 12 Kg. ) , Labour For Boring Tube Well Of Required Dia. By Water Jet System Through Any Type Of Soil Strata Including Hire And Labour Charges For Boring Pipes, Scaffolding, Tools And Plants As Necessary And Taking Out Them And Lowering Pipes, Strainers, Blind Pipe Etc. And Fitting And Fixing The Same Complete Including Bucket Washing And Other Incidental Works In The Connection. The Tube Well Should Have A Minimum 50 Mm Gap In Between The Outside Of The Tubewell Pipe And The Bore. ( E ) For Depth Upto 150 Metre For 80 Mm Dia. Tube Well Wuth Top Enlargement Of 150 Mm Dia. I ) 150 Mm Dia Boring , Supplying, Fitting And Fixing G.I Pipes Of Tata Make With All Necessary Accesries ( A ) For Exposed Work 150 Mm Dia Heavy , Supply Of Pvc Pipes & Fittings ( Medium Duty ) Conforming To Astmd-1785 And Threaded To Match With G.I Pipes As Per Is: 1239 ( Part-1 ) . ( A ) Pvc Pipes I ) 80 Mm , Supply Of Pvc Pipes & Fittings ( Medium Duty ) Conforming To Astmd-1785 And Threaded To Match With G.I Pipes As Per Is: 1239 ( Part-1 ) . ( A ) Pvc Pipes Ii ) 150 Mm , Supplying Pvc Strainer Of Approved Make With Adapter Conforming To I.S 12818 Specifications I ) 80 Mm Dia , Supplying Fitting And Fixing Heavy Type Bell Mouth Reducing Socket I ) 75 Mm X 150 Mm , Supplying Fitting And Fixing G.I Cap At Top I ) 150 Mm , Supplying Fitting And Fixing Plug Of Approved Make Conforming To I.S. Specification I ) 75 Mm , Supplying Fitting And Fixing 300 Mm M.S Housing Clamp Of Approved Quality I ) 300 Mm , Packing The Annular Space Between The Outside Of The Tube Well Pipes & Strainers And The Bore With Pea Size Washed Gravel Of Approved Quality. Having Size From 2Mm To 5 Mm Or The Size Approved By The Engineer-In-Charge Including Cost Of All Materials Labour And Equipment Complete. Gravel , Packing The Annular Space Between The Outside Of The Housing Pipes & The Bore With Puddled Clay Balls Of Approved Size As Per Direction Of Theengineer-In-Charge Including Cost Of All Materials Labour And Equipment Complete.Gravel , Compressorwashing And Developing Tube Well With Air Compressor Pump And Engine For 8 ( Eight ) Hours Continuous Pumping Per Day With Necessary Arrangements For Testing The Yield In Gallons Per Hour With V Notch Including Hire And Labour Charges For All Tools And Plants And Scaffolding As Required. , Supplying, Fitting And Fixing 3 Hp Three Phase Submersible Pump With Motor Having Capacity 50 Rpm. 50 M Head Three Phase 220 Volt Model 2015 Core 100 Mm Dia Pvc / Gi Casing Pipe As Per 12818 / 1992 With Latest Arrangement With Panel Board Including 3Mts Cable ( Cri, Texmo, Ksb, Etc. With Hanging Pipe ( G.I ) With Cable Submersible , Supplying, Fitting And Fixing 3 Hp Three Phase Submersible Pump With Motor Having Capacity 50 Rpm. 50 M Head Three Phase 220 Volt Model 2015 Core 100 Mm Dia Pvc / Gi Casing Pipe As Per 12818 / 1992 With Latest Arrangement With Panel Board Including 3Mts Cable ( Cri, Texmo, Ksb, Etc. With Hanging Pipe ( G.I ) With Cable Submersible 2.5 Mm. Cable Of Approved Brand ( Finolex ) , Supplying, Fitting And Fixing G.I Pipes Of Tata Make With All Necessary Accesries ( A ) For Exposed Work 50Mm Dia. Medium Duty , Labour For Making Arrangement For Showing Verticality Test Including The Cost For Hire Charges Of Tools And Plants, Scafolding, Labour Etc. All Complete Set Arrangement , Pvc Pipe Feeting 50 Mm Dia Pipe , Supplying, Fitting And Fixing G.I Pipes Of Tata Make With All Necessary Accesries ( A ) For Exposed Work 32Mm Medium Duty , Supplying, Fitting And Fixing G.I Pipes Of Tata Make With All Necessary Accesries ( A ) For Exposed Work 15Mm Medium Duty , Supply, Fitting And Fixing Check Valve ( Vertical ) G.M. Tested To 21 Kg Per Sq. Cm. Vi ) 50 Mm , Supply, Fitting And Fixing Check Valve ( Vertical ) G.M. Tested To 21 Kg Per Sq. Cm. Iv ) 32 Mm , Supply, Fitting And Fixing Bib Cock Or Stop Cock. ( G ) Supplying, Fitting And Fixing Alloy Iron With Brass Spindle Bib Cock / Stop Cock Of Approved Brand And Make, Spray Painted And Tested To 21 Kg Per Sq. Cm. I ) 15 Mm , Supplying , Fitting And Fixing Pvc Pipes For Underground Work Of Approved Make ( Medium Duty ) Conforming To Astmd - 1785 And Threaded To M, Atch With Gi Pipes As Per Is : 1239 ( Part - 1 ) , With All Necessary Accessories, Specails Viz. Socket, Bend , Tee , Union , Cross , Elbo , Nipple , Longscrew , Reducing Socket, Reducing Tee , Short Piece Etc. Fitted Including Cost Of All Matyereials , Jointing Materials , Cutting Pipes , Making Threads , Cutting Trenches Upto 1.5 Metre Below Surface In All Sorts Of Soil And Refilling The Same As Directed Complete In All Respect. ( Payment Will Be Made On The Centre Line Measurement Of The Total Pipe Line Including All Dspecails No Separate Payment Will Be Made For Accessories , Specials. ) I ) 125 Mm , Supplying , Fitting And Fixing Pvc Pipes For Underground Work Of Approved Make ( Medium Duty ) Conforming To Astmd - 1785 And Threaded To M, Atch With Gi Pipes As Per Is : 1239 ( Part - 1 ) , With All Necessary Accessories, Specails Viz. Socket, Bend , Tee , Union , Cross , Elbo , Nipple , Longscrew , Reducing Socket, Reducing Tee , Short Piece Etc. Fitted Including Cost Of All Matyereials , Jointing Materials , Cutting Pipes , Making Threads , Cutting Trenches Upto 1.5 Metre Below Surface In All Sorts Of Soil And Refilling The Same As Directed Complete In All Respect. ( Payment Will Be Made On The Centre Line Measurement Of The Total Pipe Line Including All Dspecails No Separate Payment Will Be Made For Accessories , Specials. ) I ) 100 Mm , Supplying , Fitting And Fixing Pvc Pipes For Underground Work Of Approved Make ( Medium Duty ) Conforming To Astmd - 1785 And Threaded To M, Atch With Gi Pipes As Per Is : 1239 ( Part - 1 ) , With All Necessary Accessories, Specails Viz. Socket, Bend , Tee , Union , Cross , Elbo , Nipple , Longscrew , Reducing Socket, Reducing Tee , Short Piece Etc. Fitted Including Cost Of All Matyereials , Jointing Materials , Cutting Pipes , Making Threads , Cutting Trenches Upto 1.5 Metre Below Surface In All Sorts Of Soil And Refilling The Same As Directed Complete In All Respect. ( Payment Will Be Made On The Centre Line Measurement Of The Total Pipe Line Including All Dspecails No Separate Payment Will Be Made For Accessories , Specials. ) I ) 80 Mm
