Supply Of Electronic Boring Bar Dialing Table For Dialling The Electronic Boring Bar - Smtc Press.Electronic Boring Bar Dialing Table For Dialling The Electronic Boring Bar - Smtc Press.,Design,Supply,Installation And Commissioning Of Dialing Table For Di-Karnataka

Supply Of Electronic Boring Bar Dialing Table For Dialling The Electronic Boring Bar - Smtc Press.Electronic Boring Bar Dialing Table For Dialling The Electronic Boring Bar - Smtc Press.,Design,Supply,Installation And Commissioning Of Dialing Table For Diameter Setting/Dialing Of SmtcBoring Bar.The Dialing Unit/Setting Unit Shall Consist Of The Following A)Fabricated Structure Dialing Table B)ManualDriven Spindle Unit C)Face Plate With Handle Bar D)Face Run Out Adjustment Mechanism For Face Plate. E)VerticalAxis(Z Axis)Dial Gauge Adjustment Mechanism With Hand Wheel F)Horizontal Dialing Adjustment Mechanism WithHand Wheel G)Linear Scale Digital Read Out To Display Of X Axis Position H)Plunger Dial Guage With 1-MicronAccuracy (Mitutoyo Make) I)Mandrel For Reference Setting J)Any Other Items Or Addition Of Elements Shall BeIncluded In This Scope Of Supply Make:Insight Technologies Or Substantially Equivalent. Other Conditions: 1.TheDialing Table Shall Normally Be As Per The Basic Drawing Attached.Drawings Of Boring Tools 705 4012 10790 &705 4012 10460 Are Attached For Reference .Bidders Are To Visit Rwf To Assess The Requirement Before Quoting ForThe Item. 2.Concept Drawing /Technical Literature/Catalogue Needs To Be Submitted Along With The Offer OtherwiseWhich The Offer Shall Be Liable To Be Summarily Rejected. 3.Necessary Detailed Dimensional Drawings AssociatedWith Design ,Installation And Commissioning And To Meet Requirement Is To Be Prepared And Got Approved By RwfBefore Manufacture. 4.Operating Instruction And Maintenance Manual Shall Be Provided With Supply 5.FinalInspection Of Tool Dialing And Electrical Load Test Will Be Done At Rwf 6.Transportation And Insurance If Any Are InThe Scope Of Supplier. 7.Installation Support Like Eot Crane, Fork Lift ,Basic Tools Etc Will Be Provided ByRwf.Special Tools Required Shall Be Arranged By The Supplier. Make:Insight Technologies Or SubstantiallyEquivalent. 8.Acceptance Criteria: A) 1-Micron Accuracy Of Dialing Should Be Ensured. B)Individual Units Shall BeTested And Functionality Demonstrated To

Refer document

Refer document

Refer document