Colour Coated Sheet Job Work As Above , Supply Trapezoidal / Corrugated Sheeting System In Galvalume In Colour Coating Steel Having Covered Width Of 1000 Mm ( Total Width 1060Mm ) , 35 Mm Crest At A Pitch Of 250 Mm Stiffened With 8 Mm Deep Inte, Sugar Mill Meham-Haryana
TDR : 29343785
Tender Notice
BOQ
Expired
Sugar Mill Meham
Haryana
Colour Coated Sheet Job Work As Above , Supply Trapezoidal / Corrugated Sheeting System In Galvalume In Colour Coating Steel Having Covered Width Of 1000 Mm ( Total Width 1060Mm ) , 35 Mm Crest At A Pitch Of 250 Mm Stiffened With 8 Mm Deep Inte
Name of Work: supply of colour coated sheets of facttory
Sl. No.
Item Description
1
Supply trapezoidal/corrugated sheeting system in galvalume in colour coating steel having covered width of 1000 mm (total width 1060mm), 35 mm crest at a pitch of 250 mm stiffened with 8 mm deep intermittent corrugation sheet be made from base metal having 0.50 mm thickness in steel of grade 345 as per ASTM A 792 M coated with alloy of Al & Zn to grade AZ minimum alloy mass 150 gm total both side with colour coating having complete dip tank pre-treatment process with chromat conversion (Cr +3) as main pre-treatment followed by PU primer of min. 5 micron DFT on each surface, finished with special polyester paint to grade 20 of min. 20 micron DFT on exposed surface & 5 micron in grey shad on unexposed surface. Note:- Sheets shall be supported with coil manufacturer test certificates for strength & coating thickness.
2
Supply of ridge of same material as item No.1 having total width of 1060mm crimped curve type/pressed with same profile.
3
Supply of 2 mm poly carbonates sheets/FRP of matching profile (for lightening purpose).
4
Dismantling of old GI Sheet.
5
Fixing of colour coated sheets with necessary self-drilling & self-trapping screws/bolts & nuts.EPDM washers with 150 mm laps where ever required.The rates shall include costs of laps, fixture like SD/self-trapping screws with EPDM washer’s incl.Stitching as required incomplete line and level, inclusive lifting to all heights as required.
6
Fixing of Ridge with all necessary jointing material inclusive cost of bolts, nuts, washers, sealing material, cutting hole making drop & funnels etc
7
Fixing of Poly carbonate sheet.
8
Dismantling of old purline
9
Fixing of MS channel 100 x 50
10
Turbo Ventilator Fan – 24” with poly carbonate sheet.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
