Bids Are Invited For 100 Mhz Digital Storage Oscilloscope - • Colour Vga Display With 320 X 240 Resolution• 100 Mhz Bandwidth• 4 Channels, 4 Kpts Memory Depth, 1 Gsa / S Sample Rate• Standard Usb Host And Device Connectivity And Optional Gpib And Rs232 Connectivity• Advanced Triggering Including Pulse Edge And Pulse Width Triggering • 20 Automatic Measurements, 4 Math Functions Including Ffts• Mask Testing• Limit Testing• Data Logging• Frequency Counter , 20 Mhz Function Generator - • 3.5 Tft Lcd Display, Direct Digital Synthesis ( Dds ) Technology With 2 Independent Output Channels• High Frequency Resolution, Full-Range Resolution Is 1Μhz-6Mhz• Different Kinds Of Standard Waveforms And Arbitrary Waveforms• Multiple Modulation Functions: Fm, Fsk, Ask, Psk• Frequency Shifts To Stable Values Instantly With Constant Phase And Amplitude• Count The Frequency, Period, Amplitude Rms Value Or Peak-To-Peak Value• Over-Voltage, Over-Current, Output Short-Circuit And Reverse Voltage Protections• Input Voltage Is Switchable ( Ac110v / Ac220v ) Through The Switch On The Back Of The Instrument With Rs232 Interface• Frequency Sweep And Amplitude Sweep , Dc Power Supply - • Display : 3 Digit 7-Segment Led Indicator For Voltage And Current• Dc Output :0-30V• Current Limit : 100 Ma To 2 A, Adjustable, Current Limiting Facility• Setting Resolution : Voltage : 100 Mv, Current : 10 Ma, Internal Resistance : <= 10 O, Stability : 2.5 Mv At 30 V / 2A, Recovery Time : <= 50 Μs• Load Regulation : ± ( 0.05 % ) , Line Regulation : ± ( 0.05 % ) • Temperature Coefficient : ± ( 0.05 % ) , Ripple & Noise : <= 1 Mv Rms• Over Range Indication : Glowingled Indicates Overload , Digital Multimeter - • 4½ Digital Multimeter, 20, 000 Counts• Large Lcd Display With Manual Range• Conductance, Capacitance And Frequency Measurement , A / Dconverter Trainer Board : 01 No. D / A Converter Trainer Board : 01 No. - • Separate Board• 4-Bit Ramp Type Adc, 8-Bit Monolithic Adc• Onboard Variable Dc Voltage Source• 4-Bit Binary Weighted Resister Dac • 4-Bit Ladder Type Dac • Onboard: Switches, Clock Generator, • Power Supply: ±12V Dc , Analog & Digitalbread Board Trainer - • Function Generator: ( 1-10-100-1K-10K-100K ) Hz ( Sine Wave / Triangular / Square Wave ) • Bread Board, 16 Bit Data Switches & Speaker, Potentiometer• Four Channel Adapter• Two Digits 7 Segment Led On Board• Power Supply : ±5V Dc@ 500Ma ( Fixed ) • Power Supply: 0 To± 15Vdc @ 500Ma ( Variable ) , Digital Ic Trainer Board - • ±5V, ±12V Smps• 6Nos 20 Pin Zip Socket& 01 No Of 40 Pin Zif Socket.• Inbuilt Fixed Clock From 1Hz To 10Khz • On Board 7 Segment Display.• Toggle Switches For Selection Of Input • On Board Pulse / Clock Generator • Logic Gate: Ic 7404, 7432, 7408, 7402, 7400, 7486, • Flip Flop: Ic 7476, 7474, Shift Register: Ic 7495• Parity Generator: Ic 74180, • Counter: Ic 7490, 7476• Multi / De-Multiplexer: 74153 / 74138• Bcd To 7 Segment Decoder: 7447• Led To Verify The O / P• 4 Bit Comparator: Ic 7485 • Software : Detailed Learning Content With Teaching And Simulation Software , Linear Ic Trainer Board - • Bread Board, Led For Output Detection, Transistor, Diodes. Resistor & Capacitor Bank, Spdt Relay, Speaker. Two 8 Pin Socket, Potentiometers Of 1K, 10K 100K Sine, Square And Triangular Output Waveform From 0-200Khz. Fixed Dc, Variable Dc, Ac Power Supply• Study Of Ics 741, 555, Lf 398, Mct2e, Lm565, Ne566 , Coupled Transistor Amplifier Trainer Kits - • Study And Analysis Of Single And Multi-Stage Rc, Lc And Transformer Coupled Amplifier • Easy Illustration Of Multistage Amplifier And Emitter Follower• In Build Sine Wave Generator With Variable Frequency And Amplitude• Dc Power Supply: +12V, +5V• Fuse: 500 Ma• Mains Supply: 230V ±10%, 50 Hz• Sine Wave Generator Frequency: 10 Hz To 100 Khz Amplitude 0 To 5 Vpp , Transistorpower Amplifier Trainer Kits - • Study Of The Working Principle Of Class A, B, C And Ab Push-Pull Amplifier• Study Of The Working Principle Of Differential Amplifier• Dc Power Supply:+12V, -12V, +5V, -5V• Sine Wave Generatorfrequency: 10 Hz To 100 Khzamplitude 0 To 5 Vpp , Feedback Amplifier Trainer Kits - • Four Feedback Amplifiers On Panel ( Voltage Shunt, Current Shunt, Voltage Series & Current Series ) • Dc Power Supply 12 V @ 500 Ma• Patch Cords , Oscillator Circuit Trainer Kits - • Study Of Design And Functioning Of Hartley, Colpitt, Rc Phase Shift, Crystal Oscillator• Exclusive And Compact Design• Straight Forward Representation Of Hartley And Colpitt Oscillator• +12V Smps Adaptor • Designed With All The Safety Standard• Illustration Of Oscillator Design Using Passive Elements• Biasing Voltage: ±12V Dc , Filter Design Kits - • Demonstrates All The Basic Concepts Of Active Filters.• On Board Circuits: Low Pass, High Pass And Band Pass Filter• Exclusive Presentation And Easy Illustration Of Each Part Of The Filter Circuit• In Built Function Generator With Selectable Range From 1 Hz To 10 Hz, 10 Hz To 100 Hz, 100 Hz To 1 Khz, 1 Khz To 10 Khz, 10 Khz To 100 Khz , Operational Amplifier Based Trainer Kits - • Op-Amp Μa741 And Its Various Applications Like Summer, Subtractor, Differentiator, Integrator, Comparator, Log / Anti-Log Amplifier Etc. • ±12V, ± 5V Dc Fixed Supply• Variable Power Supply: ± 1.5V To ±12V Dc• On Board Function Generator 1 Khz To 100 Khz• In Build Resistors, Diodes, Capacitors, Variable Potentiometer• Mounted Bread Board , Logic Gates Trainer Kits - • Exclusive And Compact Design• Designing Of And, Or And Not Gate Using Nand And Nor Gate• Straight Forward Representation Of Universal Gates• +5V Smps Adaptor Provided With The Trainer For Power Supply• Input: +5V Dc• Logic Levels +5V: High ( Logic 1 ) , 0V Low ( Logic 0 ) , Flip-Flop Circuit Trainer Kits - • Adaptable Illustration Of Flip-Flops: Rs, Jk, D, T Type• +5V Smps Adaptor Provided With The Trainer For Power Supply• Designed With All The Safety Standard• Input: +5V Dc• Logic Levels • +5V: High ( Logic 1 ) , 0V Low ( Logic 0 ) , Decoder And Encoder Trainer Kits - • Easy Illustration Of Encoder And Decoder• +5V Smps Adaptor Provided With The Trainer For Power Supply• Leds For Visual Indication Of Inputs And Outputs Status • Good Quality And Reliable Sockets Are Provided • Input: +5V Dc• Logic Levels +5V: High ( Logic 1 ) , 0V Low ( Logic 0 ) • Led Indication: Led – On ( Glow ) 1 State, Off ( Off ) 0 State , Multiplexer / De-Multiplexer Trainer Kits - • +5V Smps Adaptor Provided With The Trainer For Power Supply• Easy Illustration Of Multiplexer / De-Multiplexer• Leds For Visual Indication Of Inputs And Outputs Status• Good Quality And Reliable Sockets Are Provided • Input: +5V Dc• Logic Levels +5V: High ( Logic 1 ) , 0V Low ( Logic 0 ) • Led Indication: Led – On ( Glow ) 1 State, Off ( Off ) 0 State , Counter Trainer Kits - • Standalone System With Easy Illustration Of Different Types Of Counters• Dc Power Supply: +5V Dc• Logic Levels +5V: High ( Logic 1 ) , 0V Low ( Logic 0 ) • Led Indication: Led – On ( Glow ) 1 State Or Logic High, Off ( Off ) 0 State Or Logic Low , Shift Register Trainer Kits - • Standalone System With Easy Illustration Of All Types Of 3-Bit And 4-Bit Shift Registers• Spdt Switches For Logic Selection• Dc Power Supply: +5V Dc• Logic Levels +5V: High ( Logic 1 ) , 0V Low ( Logic 0 ) • Led Indication: • Led – On ( Glow ) 1 State Or Logic High, Off ( Off ) 0 State Or Logic Low Total Quantity : 1
