|
| 1 | Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 2 | 15 mm nominal bore and 45cm length PVC connection pipe with P.T.M.T. Nuts |
| 3 | G.I. Union |
| 4 | 15 mm nominal bore |
| 5 | 20 mm nominal bore |
| 6 | 25 mm nominal bore |
| 7 | G.I. pipes |
| 8 | 15 mm dia |
| 9 | 20 mm dia |
| 10 | Oil bound washable distemper/ Acrylic distemper |
| 11 | 15 mm PTMT bib cock |
| 12 | 15 mm PTMT bib cock long body with flange |
| 13 | Supplying of 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board. |
| 14 | Portland Cement - OPC 43 grade |
| 15 | Galvanised Wire mesh of average width of apperture 1.4mm and nominal dia of wire 0.63mm |
| 16 | Putty for wood work/Glass panes |
| 17 | Flushing Cistern P.V.C. 10 lts capacity ( low level ) (White) ( with fittings, accessories and flush pipe) |
| 18 | PTMT waste cupling 31/32mm |
| 19 | Stainless steel 125 mm grating with waste hole |
| 20 | Polyethylene water storage tank with cover and suitable locking arrangement |
| 21 | Anodised aluminium handles 125mm with plate 175*32mm |
| 22 | GI pipe 25mm dia |
| 23 | Anodised Aluminium Tower Bolt (barrel type) 150x10mm |
| 24 | GI Elbow |
| 25 | 15mm |
| 26 | 20mm |
| 27 | 25mm |
| 28 | GI Socket 15mm |
| 29 | Mseal 75gm |
| 30 | M.S. Nails 50mm long |
| 31 | Flush ball cock dia - 15mm |
| 32 | PVC long band dia - 40mm |
| 33 | GI socket 20mm |
| 34 | Aluminium wall hanger with 5 pins |
| 35 | Rectangular shape 600x450 mm precast R.C.C. manhole cover with frame - L.D. - 25 |
| 36 | Jet Spray 1.0m flexible 15mm bore |
| 37 | Acrylic Sheet 4mm thick |
| 38 | Vitreous china pedestal type water closet (European Type) |
| 39 | Vitreous china orrisa type w.c. pan size 580 mm |
| 40 | P.V.C. automatic flushing cistern 5 litre capacity |
| 41 | M.S. Nails 150mm long (Batasa) |
| 42 | M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 marked |
| 43 | Anodised Aluminium hanging twin type door stopper |
| 44 | 15 mm nominal bore and 60 cm length PVC connection pipe with P.T.M.T. Nuts |
| 45 | Aluminium beading (Powder Coated) weight per metre 150 gm |
| 46 | Pig lead |
| 47 | Rexine of approved make |
| 48 | 15 mm dia PTMT stop cock(male thread) |
| 49 | Vitreous china flat back wash basin 630x450 mm |
| 50 | uPVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia. |
| 51 | uPVC pipes (working pressure 4 kg / cm² ) Single socketed pipe 110 mm dia. |
| 52 | uPVC bend |
| 53 | 87.5o 75 mm |
| 54 | 87.5o 110 mm |
| 55 | PTMT- Angle Stop cock with Flange 15mm |
| 56 | Ply wood 5 ply with commercial ply on both faces 6 mm thick |
| 57 | Coarse sand (zone III) |
| 58 | Stainless steel kitchen sink - without drain board 610x510mm bowl depth 200 mm |
| 59 | Hydraulic door closer bottle type M.S. body with necessary accessories and screws complete |
| 60 | PTMT Ball cock 20mm complete with epoxy coated aluminium rod and H.D. Ball |
| 61 | Neoprene/EPDM rubber gasket for aluminium work |
| 62 | GI Nipple |
| 63 | 15mm-2\" |
| 64 | 15mm-3\" |
| 65 | 15mm-4\" |
| 66 | 15mm-6\" |
| 67 | Thread (Cotton) |
| 68 | Hexa blade double type |
| 69 | GI Reducer |
| 70 | 25mm -15mm |
| 71 | 20mm -15mm |
| 72 | 25mm -20mm |
| 73 | GI Hook (for 1/2\"\" GI pipe) |
| 74 | GI Nipple |
| 75 | 3/4\"\"x3\"\" |
| 76 | 3/4\"\"x4\"\" |
| 77 | 3/4\"\"x6\"\" |
| 78 | 3/4\"\"x2\"\" |
| 79 | 1\"\"x6\"\" |
| 80 | 1\"\"x4\"\" |
| 81 | 1\"\"x3\"\" |
| 82 | 1\"\"x2\"\" |
| 83 | GI socket 25mm |
| 84 | 4mm Ply board |
| 85 | Aluminium alloy grill |
| 86 | 20 mm dia PTMT stop cock |
| 87 | Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 88 | PTMT Pillar cock (fancy) 15 mm foam flow |
| 89 | PTMT - Waste Coupling 38/40 mm |
| 90 | Grab bar |
| 91 | PTMT - Towel Rail (600 mm) |
| 92 | Circular shape 560 mm dia precast R.C.C. manhole cover with frame - H.D. - 20 |
| 93 | PTMT Ball Cock 25mm complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 94 | Anodised Aluminium butt hinges 100x75x4 mm |
| 95 | Anodised Aluminium tower bolt (barrel type) 100x10 mm |
| 96 | Oxidised mild steel handles 75 mm |
| 97 | Synthetic enamel paint in white shade |
| 98 | Oxidised mild steel sliding door bolt 300x16 mm |
| 99 | Double action hydraulic floor spring with stainless steel cover plate |
| 100 | GI Tee |
| 101 | 15mm bore |
| 102 | 20mm bore |
| 103 | 25mm bore |
| 104 | PTMT Ball cock 15mm complete with epoxy coated aluminium rod and H.D. Ball |
| 105 | Brass full way valve with C.I. wheel (screwed end) 25 mm dia |
| 106 | Brass full way valve with C.I. wheel (screwed end) 32 mm dia |
| 107 | GI plug |
| 108 | 25mm |
| 109 | 20mm |
| 110 | 15mm |
| 111 | Brass hasps and staples (safety type) 115 mm |
| 112 | M.S. heavy weight butt hinges 125x90x4.0 mm IS: 1341 marked. |
| 113 | C.P. Brass angle valve 15 mm |
| 114 | Vitreous china lipped front urinal |
| 115 | Vitreous china urinal partition |
| 116 | Aluminium door (Pivot) |
| 117 | Syphon set ( for 10 ltr. Cistern) |
| 118 | Syphon warcel ( for 10 ltr. Cistern) |
| 119 | PVC shelves under mirror (Prayag/Equivalent) |
| 120 | EWC cover (white PVC) |
| 121 | EWC seat cover hinge |
| 122 | GI Nipple |
| 123 | 15mm |
| 124 | 20mm |
| 125 | 25mm |
| 126 | PVC soap dish (liquid) |
| 127 | PVC soap container (Prayag/Equivalent) |
| 128 | White cement (5 kg) |
| 129 | Water tank lid (500 ltr. Capacity tank) |
| 130 | Flush handle PVC |
| 131 | MS screw 35mm / 8mm |
| 132 | Face (bib cock) Metal |
| 133 | Z channel handle Aluminium |
| 134 | PTMT - Urinal Spreader 15 mm |
| 135 | PVC gitty for screw |
| 136 | Colour tube (OBD) (100 ml) |
| 137 | Providing and supplying G.I. Pipes 32 mm dianominal bore complete as per specification and as per direction of Engineer-in-Charge. |
| 138 | Providing and supplying gun metal gate valve with CI whell 32 mm dia nominal bore complete as per specification and as per direction of Engineer-in-Charge. |
| 139 | Providing and supplying GI elbow 32 mm dia, nominal bore complete as per specification and as per direction of Engineer-in-Charge. |
| 140 | Providing and supplying GI pipe 50 mm dia, nominal bore complete as per specification and as per direction of Engineer-in-Charge. |
| 141 | Providing and supplying GI elbow 50 mm dia, nominal bore complete as per specification and as per direction of Engineer-in-Charge. |
| 142 | Providing and supplying GI union 50 mm dia, nominal bore complete as per specification and as per direction of Engineer-in-Charge. |
| 143 | Providing and supplying gun metal ball valve50 mm dia, nominal bore complete as per specification and as per direction of Engineer-in-Charge. |
| 144 | Providing and supplying PTMT two way angle valve 15 mm dia, nominal bore complete as per specification and as per direction of Engineer-in-Charge. |
| 145 | Providing and supplying aluminium rod hinge with 100 mm x 25 mm complete as per specification and as per direction of Engineer-in-Charge. |
| 146 | Providing and supplying mica sheet of 0.80 mm thick complete as per specification and as per direction of Engineer-in-Charge. |
| 147 | Providing and supplying wall tile of 300 mm x200 mm complete as per specification and as per direction of Engineer-in-Charge. |
| 148 | Providing and supplying Birla/JKwall puttycomplete as per specification and as per direction of Engineer-in-Charge. |
| 149 | Providing and supplying tarpine oilcomplete as per specification and as per direction of Engineer-in-Charge. |
| 150 | Providing and fixing to existing door frames. |
| 151 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. |
| 152 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 153 | Providing & supplying PTMT shower(Pryag or Equivalent as per Art No.1814) |
| 154 | Providing & supplying PTMT Swan Neck Type Pillar Cock (Pryag or Equivalent CAT No.1322) as per direction of Eng-in-charge. |
| 155 | Providing & supplying waste pipe roll (PVC) required as per direction of Enginer in charge |
| 156 | Providing & supplying Acrylic smooth Exterrior of approved brand( Berger or equivalent) required as per direction of Engineer -in-Charge. |
| 157 | Providing & supplying CP Brass health faucet with 1m tube and hook of chrome finish of Parko make or equivalent as per direction of Engineer-in-charge. |
| 158 | Providing & supplying GI Union 40 mm required as per direction of Engineer-in-charge. |
| 159 | Providing & supplying GI Elbow 40 mm required as per direction of Engineer-in-charge. |
| 160 | Providing & supplying GI Nipple 40 mm dia 6\" long required as per direction of Engineer-in-charge. |
| 161 | Providing & supplying GI Tank Nipple 20 mm dia required as per direction of Engineer-in-charge. |
| 162 | Providing & supplying Al sliding door bolt size 250x16 mmrequired as per direction of Engineer-in-charge. |
| 163 | Providing & supplying CP Brass urinal spreeder of 15 mm diarequired as per direction of Engineer-in-charge. |
| 164 | Providing & supplying stainless steel screw of required as per direction of Engineer-in-charge. |
| 165 | 20 mm long |
| 166 | 40 mm long |
| 167 | 50 mm long |
| 168 | 75 mm long |
| 169 | Providing & supplying Z type MS handle (Fasner handle) for Z section windowrequired as per direction of Engineer-in-charge. |
| 170 | Providing & supplying CP Brass cupboard shutter handle 75 mm longrequired as per direction of Engineer-in-charge. |
| 171 | Providing & supplying Brass hasp staple 125 mm longrequired as per direction of Engineer-in-charge. |
| 172 | uPVC sockit |
| 173 | 75 mm |
| 174 | 110 mm |
| 175 | Debit of dismantled items/materials at site. |
| 176 | Old dismantled aluminium credit |
| 177 | Old dismantled iron scrap |
